• 한국전기전자재료학회논문지
• /
• 제23권6호
• /
• pp.431-435
• /
• 2010

In this paper, we investigated the dependence of device performance and hot carrier lifetime on the channel direction of PMOSFET. $I_{D.sat}$ vs. $I_{Off}$ characteristic of PMOSFET with <100> channel direction is greater than that with <110> channel direction because carrier mobility of <100> channel direction is greater than that of <110> channel direction. However, hot carrier lifetime for <110> channel direction is much lower than that with <110> channel due to the greater impact ionization rate in the <100> channel direction. Therefore, concurrent consideration of reliability characteristics and device performance is necessary for channel strain engineering of MOSFETs.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.771-774
• /
• 2003

In this paper, the programming characteristics of the multi-bit devices based on SONOS structure are investigated. Our devices have been fabricated by 0.35 $\mu\textrm{m}$ complementary metal-oxide-semiconductor (CMOS) process with LOCOS isolation. In order to achieve the multi-bit operation per cell, charges must be locally frapped in the nitride layer above the channel near the source-drain junction. Programming method is selected by Channel Hot Electron (CUE) injection which is available for localized trap in nitride film. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve are investigated. The multi-bit operation which stores two-bit per cell is investigated. Also, Hot Hole(HH) injection for fast erasing is used. The fabricated SONOS devices have ultra-thinner gate dielectrics and then have lower programming voltage, simpler process and better scalability compared to any other multi-bit storage Flash memory. Our programming characteristics are shown to be the most promising for the multi-bit flash memory.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.93-97
• /
• 2011

In this paper, we discuss design considerations for an n-channel metal-oxide-semiconductor field-effect transistor (MOSFET) with a lateral asymmetric channel (LAC) doping profile. We employed a 0.35 ${\mu}M$ standard complementary MOSFET process for fabrication of the devices. The gates to the LAC doping overlap lengths were 0.5, 1.0, and 1.5 ${\mu}M$. The drain current ($I_{ON}$), transconductance ($g_m$), substrate current ($I_{SUB}$), drain to source leakage current ($I_{OFF}$), and channel-hot-electron (CHE) reliability characteristics were taken into account for optimum device design. The LAC devices with shorter overlap lengths demonstrated improved $I_{ON}$ and $g_m$ characteristics. On the other hand, the LAC devices with longer overlap lengths demonstrated improved CHE degradation and $I_{OFF}$ characteristics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.363-367
• /
• 1988

A simple analytical model for the lateral channel electric field in gate - offset structured Lightly Doped Drain MOSFET has been developed. The model's results agree well with two dimensional device simulations. Due to its simplicity, our model gives a better understanding of the mechanisms involved in reducing the electric field in the LDD MOSFET. The model shows clearly the dependencies of the lateral channel electric field as function of drain and gate bias conditions and process, design parameters. Advantages of analytical model over costly 2-D device simulations is to identify the effects of various parameters, such as oxide thickness, junction depth, gate / drain bias, the length and doping concentration of the lightly doped region, on the peak electric field that causes hot - electron phenomena, individually. We are able to find the optimum doping concentration of LDD minimizing the peak electric field and hot - electron effects.

• Transactions on Control, Automation and Systems Engineering
• /
• 제3권4호
• /
• pp.250-256
• /
• 2001

This paper deals with a design problem of a decentralized controller with a strongly connected two-input two-output multivariable system. To this end, we present a classical design approach which consists of two main steps: one is to decompose the multivariable plant into two single-input single-output systems by means of the Individual Channel Design (ICD) concept, the other is to design controller of each channel by the Coefficient Diagram Method (CDM) so that it satisfies, especially, time domain specifications such as settling time, overshoot etc.. A design procedure was proposed and then was applied to a 2$\times$2 hot rolling mill plant. Simulation results showed that the proposed method has excellent control performances.

• 대한전기학회논문지
• /
• 제38권6호
• /
• pp.401-415
• /
• 1989

A simple but accurate analytical model for the lateral channel electric field in gate-offset structured Lightly Doped Drain MOSFET has been developed. Our model assumes Gaussian doping profile, rather than simple uniform doping, for the lightly doped region and our model can be applied to LDD structures where the junction depth of LDD is not identical to the heavily doped drain. The validity of our model has been proved by comparing our analytical results with two dimensional device simulations. Due to its simplicity, our model gives a better understanding of the mechanisms involved in reducing the electric field in the LDD MOSFET. The model shows clearly the dependencies of the lateral channel electric field on the drain and gate bias conditions and process, design parameters. Advantages of our analytical model over costly 2-D device simulations is to identify the effects of various parameters, such as oxide thickness, junction depth, gate/drain bias, the length and doping concentration of the lightly doped region, on the peak electric field that causes hot-electron pohenomena, individually. Our model can also find the optimum doping concentration of LDD which minimizes the peak electric field and hot-electron effects.

• 한국전기전자재료학회논문지
• /
• 제14권11호
• /
• pp.869-873
• /
• 2001

The effects of alternate bias stress on p-channel poly-Si TFT\`s has been systematically investigated. We alternately applied positive and negative bias stress on p-channel poly-Si TFT\`s, device Performance(V$\_$th/, g$\_$m/, leakage current, S-slope) are alternately appeared to be increasing and decreasing. It has been shown that device performance degrade under the negative bias stress while improve under the positive bias stress. This effects have been related to the hot carrier injection into the gate oxide rather than the generation of defect states within the poly-Si/SiO$_2$ interface under alternate bias stress.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.327-330
• /
• 2004

It is shown that the hot carrier degradation due to enhanced hot holes trapping dominates PMOSFETs lifetime both in thin and thick devices. Moreover, it is found that in 0.13 ${\mu}m$ CMOSFET the PMOS lifetime under CHC (Channel Hot Carrier) stress is lower than the NMOSFET lifetime under DAHC (Drain Avalanche Hot Carrier) stress. Therefore. the interface trap generation due to enhanced hot hole injection will become a dominant degradation factor. In case of thick MOSFET, the degradation by hot carrier is confirmed using charge pumping current method and highly necessary to enhance overall device lifetime or circuit lifetime in upcoming nano-scale CMOS technology.

• 한국전자통신학회논문지
• /
• 제9권8호
• /
• pp.847-852
• /
• 2014

반도체 소자 제조에서 비용 절감을 위한 공정기술의 스케일링 가속화 경향에 따라 축소기술에 대한 요구가 증가되고 있다. 축소에 따른 또 다른 가장 큰 문제점의 하나는 Hot Carrier Injection (HCI) 특성의 열화이다. 이는 축소 과정에서 생기는 불가피한 가장 큰 이슈중의 하나이며, 특히 입출력 소자에 있어 극복하기 어려운 부분이다. 이의 개선을 위해 유효 채널 길이를 늘이고자 LDD 임플란트 공정 이전에 산화막이 추가되었고, 또한 I/O LDD 임플란트 공정의 이온 입사 각도를 최적화함으로써, LDD 영역에서 E-field 열화 없이 HCI 규격을 만족할 수 있었다.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3626-3631
• /
• 2009

본 논문에서는 아날로그 회로에 사용되는 NMOSFET에 대한 Hot-Carrier 열화특성을 조사하였다. 여러 값을 갖는 게이트 전압으로 스트레스를 인가한 후, 소자의 파라미터 열화를 포화 영역에서 측정하였다. 스트레스 게이트 전압의 범위에 따라 계면 상태(interface state) 뿐 아니라 전자와 정공의 포획이 드레인 근처 게이트 산화막에서 확인되었다. 그리고 특히 낮은 게이트 전압의 포화영역에서는 정공의 포획이 많이 발생하였다. 이러한 전하들의 포획은 전달 컨덕턴스 ($g_m$) 및 출력 컨덕턴스 ($g_{ds}$)의 열화의 원인이 된다. 아날로그 동작 범위의 소자에서 파라미터 열화는 소자의 채널 길이에 매우 민감하게 반응한다. 채널길이가 짧을수록 정공 포획이 채널 전도도에 미치는 영향이 증가하게 되어 열화가 증가되었다. 이와 같이 아날로그 동작 조건 및 아날로그 소자의 구조에 따라 $g_m$ 및 $g_{ds}$의 변화가 발생하므로 원하는 전압 이득($A_V=g_m/g_{ds}$)을 얻기 위해서는 회로 설계시 이러한 요소들에 대한 고려가 필요하다.