• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.602-608
• /
• 2002

The flexible structure like solar array and antenna in spacecraft shows very sensitive responses to the inner or outer disturbance and noise. And the spacecraft becomes more complex and larger as it has various mission and role. But since the spacecraft need to have the limited mass, the thin and light material should be selected and this necessity induces the decrease d natural frequency and structural stiffness. It reduces the ability of adapting to the disturbance and induces the structural unstability. Certainly, the disturbance does not only make the structural unstability, but also give the bad effect to the precise attitude control. So it is necessary to control the vibration in the space. In this paper, the flexible structure control modeling with piezo sensor and piezo actuator is developed. The model uncertainty of damping ratio is overcome by robust control. The system equation is induced by the finite element method.

• Industrial Engineering and Management Systems
• /
• v.11 no.4
• /
• pp.310-330
• /
• 2012

Scheduling is an important tool for a manufacturing system, where it can have a major impact on the productivity of a production process. In manufacturing systems, the purpose of scheduling is to minimize the production time and costs, by assigning a production facility when to make, with which staff, and on which equipment. Production scheduling aims to maximize the efficiency of the operation and reduce the costs. In order to find an optimal solution to manufacturing scheduling problems, it attempts to solve complex combinatorial optimization problems. Unfortunately, most of them fall into the class of NP-hard combinatorial problems. Genetic algorithm (GA) is one of the generic population-based metaheuristic optimization algorithms and the best one for finding a satisfactory solution in an acceptable time for the NP-hard scheduling problems. GA is the most popular type of evolutionary algorithm. In this survey paper, we address firstly multiobjective hybrid GA combined with adaptive fuzzy logic controller which gives fitness assignment mechanism and performance measures for solving multiple objective optimization problems, and four crucial issues in the manufacturing scheduling including a mathematical model, GA-based solution method and case study in flexible job-shop scheduling problem (fJSP), automatic guided vehicle (AGV) dispatching models in flexible manufacturing system (FMS) combined with priority-based GA, recent advanced planning and scheduling (APS) models and integrated systems for manufacturing.

• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.1-5
• /
• 2013

Recently, the spread of a variety of electronic card is using as credit cards, transportation cards, passports, driver's licenses, public phone card, and etc. LED smart cards need to raise application technique because variety of LED smart cards increasing supply and usage. in this paper, we propose a LED smart card contained inside the card that piezoelectric method flexible Ultra-thin speaker. and a melody flows when User using the LED smart card.. Therefore we are verified to useful through develop to electronic card that was designed system circuit and implemented circuit add in ultra-thin flexible Speaker based on piezoelectric.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.189-192
• /
• 2005

We have investigated the EO characteristics generation of pretilt angle for a nematic liquid crystal (NLC) alignment with photoalignment method on three kinds of photopolymer surfaces using polymer substrates. The LC homogeneous alignment were observed on the PMI3CA (N-(phenyl)maleimide with 3-carbon chain cinnamoyl group) and PMIF (N-(phenyl)maleimide including fluoro cinnamoyl group). However, the homeotropic alignment on the PMI5CA(N-(phenyl)maleimide with 5-carbon chain cinnamoyl group) was obtained. Also, EO characteristics of the flexible photoaligned TN-LCD using PMIF surface are better than that of the flexible TN-LCD using PMI3CA surface. Also, the stable EO performances of flexible photoaligned VA-LCD using the PMI5CA surface was observed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.573-576
• /
• 2005

This research presents a three-dimensional modeling technique for a flexible sheet. A relative coordinate formulation is used to represent the kinematics of the sheet. The three-dimensional flexible sheet is modeled by multi-rigid bodies interconnected by out-of-plane joints and plate force elements. A parent node is designated as a master body and is connected to the ground by a floating joint to cover the rigid motion of the flexible sheet in space. Since the in-plane deformation of a sheet such as a paper and a film is relatively small, compared to out-of-plane deformation, only the out-of-plane deformation is accounted for in this research. The recursive formulation has been adopted to solve the equations of motion efficiently. An example is presented to show the validity of the proposed method.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.257-264
• /
• 2019

Recently, ITU-T recommends that FlexE, which allows the flexible configuration of Ethernet signals, be received by OTN for transparent transmission through OTN. To compensate for the difference in bit rate that can occur when mapping FlexE signals to OTN payload, an idle codeword is removed or inserted. However, the detailed functional blocks required to implement this method are not yet available. In this paper, based on the recent ITU-T requirements, a detailed functional block for OTN mapping of FlexE signals is proposed based on 400G class. In addition, based on the detailed functional blocks, mathematical analysis was performed to obtain the characteristics of removing and inserting idle code words, and the simulation results are shown.

• Korean Journal of Applied Biomechanics
• /
• v.32 no.2
• /
• pp.37-42
• /
• 2022

Objective: The aim of this study is to analyze the effect of the strength of the ankle support on the walking characteristics and ankle joints when men with flexible flat feet walk. Method: 13 adult male subjects (age: 23.9 ± 2.4 yrs, height: 173.0 ± 5.0 cm, weight: 76.9 ± 13.2 kg, Navicular Drop Test (NDT): 10.2 ± 0.8 mm) participated in this study. Each participant had to walk with the 3 conditions, barefoot, soft arch support and hard arch support, along a walkway while their kinematics was recorded at 100 Hz. Results: Based on the results of this study, it is considered that men with flexible flat feet should use hard arch support rather than bare feet to induce normal arch shape, relieve foot damage caused by excessive ankle joint abnormalities and improve stability. Conclusion: Our results for men with flat flexibility, there was a significant difference in the value of step length when walking was performed using two arch supports with different strengths. The angle of ankle dorsiflexion was significantly increased, and the ankle eversion angle was significantly decreased.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.1022-1027
• /
• 2007

This paper presents a method to analyze the unbalance response of a high speed polygon mirror scanner motor supported by sintered metal bearing and flexible structures by using the finite element method and the mode superposition method considering the asymmetry of the gyroscopic effect and sintered metal bearing. The eigenvalues and eigenvectors are calculated by solving the eigenvalue problem and the adjoint eigenvalue problem by using the restarted Arnoldi iteration method. The decoupled equations of motion can be obtained from global finite element motion equations by using the orthogonal relation between the right eigenvectors and left eigenvectors. The decoupled equations of motion are used to analyze the unbalance response of a high speed polygon mirror scanner motor. The validity of the proposed method is verified by comparing the simulated unbalance response with the experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.5-9
• /
• 1987

In this study, three insertion techniques vibration method, tactile sensor-assisted method and vision assisted method are developed for the insertion of electric contacts into connectors. In order to prove their Performances, a series of experiments were conducted for various shapes of el-ectric contacts. From the experimental results, three insertion methods are compared and their merits are discussed in detail.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.3 s.234
• /
• pp.369-386
• /
• 2005

Various aspects of structural optimization techniques under transient loads are extensively reviewed. The main themes of the paper are treatment of time dependent constraints, calculation of design sensitivity, and approximation. Each subject is reviewed with the corresponding papers that have been published since 1970s. The treatment of time dependent constraints in both the direct method and the transformation method is discussed. Two ways of calculating design sensitivity of a structure under transient loads are discussed - direct differentiation method and adjoint variable method. The approximation concept mainly focuses on re- sponse surface method in crashworthiness and local approximation with the intermediate variable Especially, as an approximated optimization technique, Equivalent Static Load method which takes advantage of the well-established static response optimization technique is introduced. And as an application area of dynamic response optimization technique, the structural optimization in flexible multibody dynamic systems is re- viewed in the viewpoint of the above three themes