• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회 2001년도 제6차 학술대회 초록집
• /
• pp.174-174
• /
• 2001

Purpose： Dimensions of body RF coil composed of 4 rectangular loops for low field open MRI hav been optimized. The design result shows the field inhomogeneity of B1 field below 1.5 dB in the 25 cm DSV can be achieved. Method： Our low field RF coil is composed of 4 rectangular strip loops that assumed to b located at both the bottom and top sides of permanent magnet. All the loops have identica dimensions and current amplitude. First, the inductance of a loop is calculated. Second, the current distribution on the coil strip is calculated by using finite difference time doma method (FDTD). It takes as much as 4 days in FDTD simulation for low frequency RF field That's why the electrical dipole radiation method is used for simulation. With the curren distribution obtained using the FDTD simulation, for various dimensional parameters th magnetic field has been calculated by electric dipole radiation method, where the curren elements are regarded as electric dipole radiation sources. The field pattern from electri dipole radiation is almost same as that from FDTD simulation. Also, it is same as that fro the result using the Viot-Savart equation, for far tone radiation term becomes zero and th Bl field amplitude of near one radiation is the same as the B field due to static current The field homogeneity is calculated in the 25 cm BSV.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.59-67
• /
• 1995

Depending upon the eye and head movement, the visual field is often classified into three categories ; stationary field, eye field and head and eye field. To investigate the effect of background condition on the size of the visual field, an experiment was conducted, in which the subject was instructed to search a target with distinct orientations. In each trial, a single target was presented on the perimeter modified to cover the range of 330 .deg. around the fixation point, with the visual angle subtended 1.4 .deg. vertically and horizontally. Nontarget density, meridian, size contrast and subject showed a significant effect on the visual field at .alpha. =0.01, where density was inversely proportional to the size of the visual field, and size contrast linearly proportional to the size of the visual field. The size of the visual field on horizontal axis was larger than that on vertical axis, and that on right and upper meridian was also larger than on left and lower meridian. The shape was found to be horizontally oriented oval and statistically asymmetric with respect to horizontal and vertical axes. In addition, the regression equations to predict the visual field on the given background condition were suggested. These results were expected to be used as a design guideline when arranging displays and controls on panels such as automobile display panels, cockpits, etc.

• 한국정보교육학회:학술대회논문집
• /
• 한국정보교육학회 2021년도 학술논문집
• /
• pp.31-36
• /
• 2021

AI 기술로 대변되는 4차 산업혁명 시대를 맞이하여 교육 현장에서 다양한 AI 교육이 이루어지고 있다. 하지만 교육 현장에서 이루어지는 AI 교육은 단발적인 프로젝트 교육 혹은 교사 중심의 교육이 대부분을 차지하고 있다. 이에 학생 중심, 현장 중심 교육을 실천하기 위해 디자인 씽킹을 기반으로 인공지능 교육 프로그램을 개발하였다. 디자인 씽킹 기반 인공지능 교육 프로그램은 생활 속 문제를 AI로 해결하는 과정을 통해 AI에 대한 이해와 활용 능력이 향상될 것이며, AI에 대한 이해를 넘어선 새로운 가치를 창출하는 능력을 길러줄 것이다. 디자인 씽킹 기반 인공지능 교육 프로그램 등으로 교육 현장에서 다양한 AI 교육이 이루어지길 기대한다.

• 한국조경학회지
• /
• 제31권6호
• /
• pp.107-119
• /
• 2004

special subjects, from basic data-building to applied design itself, and from how-why studies to theory building research. It seems that the research concerns are mainly the explanation of the processes of design projects rather than the application and expression of design theory and conceptual work itself. The articles do not show a clear trend or design concerns that would lead landscape architecture firms or its market. A few articles deal with aesthetical theory and with design criticism that could be one of landscape design's fundamental theories. It is not enough to regard the Journal of the Korean Institute of Landscape Architecture as the main stream of contemporary Korean landscape design trends. More research in the field of landscape design need to focus on pre-research work rather than on post-work reports. More research work in the field of landscape aesthetics is also required. The format of the journal needs to be reformed to include more design research papers that are of a free-presentation style in nature.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.67-74
• /
• 2017

PURPOSES : The objective of this study is to ascertain the curing period of cementless cold central plant recycled asphalt base-layer, using mechanical analyses and specimen quality tests on the field. METHODS : Cold central plant recycled asphalt base-layer mixture was produced in the plant from reclaimed asphalt, natural aggregate, filler for the cold mix, and the modified emulsion AP using asphalt mix design and plant mix design. In order to examine the applicability of the curing period during the field test, the international standards for the possibility of core extraction and the degree of compaction and LFWD deflection were analyzed. Moreover, Marshall stability test, porosity test, and indirect tensile strength test were performed on the specimens of asphalt mix and plant mix design. RESULTS : The plant production process and compaction method of cementless cold central plant recycled asphalt base-layer were established, and the applicability of the optical moisture content for producing the mixture was verified through the field test. In addition, it was determined that the core extraction method of the conventional international curing standard was insufficient to ensure performance, and the LFWD test demonstrated that the deflection converges after a two-day curing. However, the back-calculation analysis reveals that a three-day curing is satisfactory, resulting in a general level of performance of dense asphalt base-layer. Moreover, from the result of the specimen quality test of the asphalt mix design and plant mix design according to the curing period, it was determined that the qualities satisfied both domestic and international standards, after a two-day curing. However, it was determined that the strength and stiffness after three-day curing are higher than those after a two-day curing by approximately 3.5 % and 20 %, respectively. CONCLUSIONS:A three-day curing period is proposed for the cementless cold central plant recycled asphalt base-layer; this curing period can be demonstrated to retain the modulus of asphalt-base layer in the field and ensure stable quality characteristics.

• 한국실내디자인학회논문집
• /
• 제38호
• /
• pp.21-29
• /
• 2003

This study began to classify the studies on 'culture' in the field of environmental design overall. The classifying process adopted not the approach to preselect the criteria but the phenomenological inductive approach and content analysis method focusing on environmental design in order to understand which place the environmental design had taken. As a result, following aspects were reviewed: what is the area in which the studies on culture is made under the environmental design; what is the trend of using the word 'culture' in terms of logical connection; what is the level of approach to culture from the viewpoint of search, correspondence or application stage. On the whole, followings were drawn as conclusions. First, the interest of the studies on culture has been increased with time especially in the field of interior design. Second, the word 'culture' has become to be used a lot as 'cultural', and was used together with traditional, enterprise and material. Lastly, culture was studied at a starting point by and large. Although the papers, the objects of this study, are confined to five kinds of journals, the analysis of them is helpful to preestimate the trend of studies on culture because they have propensity to lead the international professional academic world.

• Journal of the Optical Society of Korea
• /
• 제13권3호
• /
• pp.341-348
• /
• 2009

We report the development of full-field swept-source optical coherence tomography (SS-OCT) in the wavelength range of 815-870 nm using a unique combination of super-luminescent diode (SLD) as broad-band light source and acousto-optic tunable filter (AOTF) as a frequency-scanning device. Some new applications of full-field SS-OCT in forensic sciences and engineering materials have been demonstrated. Results of simultaneous topography and tomography of latent fingerprints, silicon microelectronic circuits and composite materials are presented. The main advantages of the present system are completely non-mechanical scanning, wide-field, compact and low-cost.

• 한국실내디자인학회논문집
• /
• 제26권6호
• /
• pp.180-190
• /
• 2017

The subway station is not only an effective means to solve urban traffic problems, but also a kind of representative city shelters with a variety of functions such as urban beauty and disaster prevention. At the same time, the subway station as public facilities need activate the urban functions and through the effective design schemes for a variety of the facade of underground entrance to improve users' awareness and reliability for the subway station as a city shelters. This study is conducted to purpose the design direction considering design and disaster preventing characteristics of the underground subway station entrance. In addition, it will provide a basic reference for the subway station in the renovation and construction. The study is composed of literature reviews and field survey. The literature reviews through papers and documents related to the city shelters, the components and characteristics of city shelters, and components and characteristics of facade design of underground entrance at subway station. Before the field survey through the online surveys with evacuation capabilities and screening only the subway station. And field survey is conducted on the site with careful observation and confirmation. Last cluster analysis were applied to the finally selected samples by the SPSS Win18.0

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 B
• /
• pp.922-924
• /
• 1992

This paper presents a CAE(Computer Aided Engineering)system for solving electrostatic field problems by means of a small size computer such as a personal computer. The system software operated on the personal computer is composed of a CAD(Computer aided Design), electric field analysis by using FEM(Finite Element Method)and DB(Data Base)of insulating materials. In addition, we discuss an application of the system to analyzing electric field such as parallel plate electrodes with an insulation spacer, which result suggests that the visualization of electric field distribution and tolerance for insulation strength enables us to assure a simplified evaluation of the insulating design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.15-18
• /
• 1990

In this paper, in order to optimize the shape of electrode to achieve prescribed electric field intensity distribution along the surface of electrode, sensitivity analysis based on finite element method is proposed. The objective function of this problem is the difference of calculated electric field intensity at given design and prescribed electric field intensity. So, the problem is to find the shape of electrode to minimize the objective function defined above. The result of numerical example shows that maximum electric field error is about 0.1% and the usefulness of this shape optimal design procedure.