• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.61-66
• /
• 2007

A gain enhancement rail-to-rail buffer amplifier for liquid crystal display (LCD) source driver is proposed. An op-amp with extremely high gain is needed to decrease the offset voltage of the buffer amplifier. Cascoded floating current source and class-AB control block in the op-amp achieve a high voltage gain by reducing the channel length modulation effect in high voltage technologies. HSPICE simulation in $1\;{\mu}V$ 15 V CMOS process demonstrates that voltage gain is increased by 30 dB. The offset voltage is improved from 6.84 mV to $400\;{\mu}V$. Proposed op-amp is fabricated in an LCD source driver IC and overall system offset voltage is decreased by 2 mV.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1168-1171
• /
• 2007

Integrating systems on TFT-LCD panels is more and more popular for the mobile display application. However, it may not be necessary to use LTPS TFT devices. A-Si TFTs are used to integrate systems on TFT-LCD panels, especially scan (gate) drivers. To further reduce the chip size of driver IC, the triplegate pixel structure is developed. Therefore, the number of the source lines is reduced to 1/3 times.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1029-1032
• /
• 2005

A 262K-color QVGA LTPS AMLCD was developed. This panel has integrated gate driver and data multiplexer (1:3) by p_Si LTPS TFT process. The commercialized driver IC was adopted to implement this display. Fine image quality, low powerconsumption and cost-efficiency feature make the panel be suitable for mobile application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.270-274
• /
• 2002

We have developed a new COG technique using flip chip solder joining technology for excellent resolution and high quality LCD panels. Using the eutectic Bi-Sn and the eutectic In-Ag solder bumps of 50-80 ${\mu}m$ pitch sizes, a ultrafine interconnection between IC and glass substrate was successfully made at or below $160^{\circ}C$. The contact resistance and reliability of Bi-Sn solder joint showed the superiority over the conventional ACF bonding.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2012.07a
• /
• pp.115-116
• /
• 2012

최근 차세대 영상 기술로 홀로그래피가 많은 주목을 받고 있다. 컴퓨터를 이용한 홀로그램 생성 방법(computer generated hologram, CGH)을 많이 사용하고 있는데 CGH는 많은 연산량이 요구되기 때문에 실시간의 CGH를 위해서 FPGA나 GPU를 이용한 연산 방법이 주로 사용되고 있다. 하드웨어를 기반으로 하여 구현할 경우에 내부 시스템의 비트 제한으로 인하여 S/W와 같은 품질을 얻을 수 없다. 따라서 본 논문에서는 품질의 저하를 최소화하면서 하드웨어의 자원을 최대한 감소시킬 수 있는 하드웨어 비트 너비를 분석하여 가이드라인을 제시하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.702-708
• /
• 2020

Recently, as LED display systems have become larger, research on effective power control methods for the systems has been in progress. This paper proposes a power control method to minimize power loss due to the difference in LED characteristics for each channel of a backlight unit (BLU) system. The proposed LED driver IC has a power optimization function and detects the minimum headroom voltage for constant current operation of all channels and linearly controls the DC-DC converter output. Thus, it minimizes power consumption due to unnecessary additional voltage. In addition, it does not require a voltage sensing comparator or a voltage generation circuit for each channel. This has a great advantage in reducing the chip size and for stabilization when implementing an integrated circuit. In order to verify the proposed function, an IC was designed using Cadence and Synopsys' design tools, and it was fabricated with a Magnachip 0.35um 5V/40V CMOS process. The experiments confirmed that the proposed power control method controls the minimum required voltage of the BLU system.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.1
• /
• pp.13-17
• /
• 2013

In this paper, we designed a charge pump circuit using level shifter for LED driver IC. The designed circuit makes the 15 V output voltage from the 5 V input in condition of 50 kHz switching frequency. The prototype chip which include the proposed charge pump circuit and its several internal sub-blocks such as oscillator, level shifter was fabricated using a 0.35 um 20 V BCD process technology. The size of the fabricated prototype chip is 2,350 um ${\times}$ 2,350 um. We examined performances of the fabricated chip and compared its measured results with SPICE simulation data.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.419-423
• /
• 2004

This paper shows a new concept of digital power meter based on the optical sensing technique. The digital power meter with isolate IC so called Photocoupler is designed and implemented. The system composed of power and analong interface circuits, micro-controller and LCD display circuits. The most errors in power meter happen on measurement and calculation process for load voltages and currents. The suggested method on this paper is to use no noise sensor and PIC microprocessor. The results of simple test for power meter prototype are showed a nearly similar date to commercial product.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.8
• /
• pp.27-33
• /
• 2007

A novel priming discharge technique in which the ramp shaped priming pulse is superposed on the sustain period so that the entire plasma display panel (PDP) is discharged at the same time with a single drive circuit is proposed. From the experimental results, it is ascertained that the priming discharge is ignited only in a pixel in which sustain discharge does not occur and it has been understood that the priming pulse hardly influences the sustain discharge. Moreover, high-speed driving with address pulse widths of 0.7[${\mu}s$] was achieved and a wide address voltage margin of 40[V] was obtained by using the drive method applied the proposed priming discharge technique. In these results, full-HDTV PDP with 1080 horizontal scanning lines can be driven without decreasing the brightness and the possibility of the commercializing is also high because this technology is designed for using the commercialized driver IC.

• Journal of Korea Society of Industrial Information Systems
• /
• v.18 no.3
• /
• pp.1-8
• /
• 2013

Plasma display panel (PDP) televisions are facing to have a new chance to receive attention along with a boom in 3-D software and contents because PDP can provide the comfortable and realistic 3-D images. The PDP has three driving circuit boards such as X, Y and addressing boards. Cost effective driving waveform has already been reported to decrease the number of driving circuit board. Half bridge based sustaining driver can remove a sustaining driver in the X board. However, the biasing circuit in the X driving boards cannot be reduced because there are some drawbacks such as unstable gas discharge condition and unreliability of an address driver IC. In this paper, the half bridge based sustaining driver is considered and a simple address driver is proposed to remove one driving board, X driving board. The stable gas discharge condition, reliability of the address driver IC and the low cost can be obtained by the proposed circuit.