• 한국초전도ㆍ저온공학회논문지
• /
• 제8권1호
• /
• pp.26-28
• /
• 2006

The development technique of digital logic using CMOS device is close reached several limitations These make technical needs that are ultra high speed superconductive systems based on CMOS silicon digital computing technique. Comparing digital logic based on silicon CMOS, the computing technique based on ultra high speed superconductive systems has many advantages which are ultra low power consumption, ultra high operation speed. etc. It is estimated that features like these increasingly improve the possibility of ultra low power and ultra superconductive systems. In this paper digital logics of current CMOS technique and RSFQ superconductive technique are compared with and analyzed.

• 한국통신학회논문지
• /
• 제33권5C호
• /
• pp.378-385
• /
• 2008

본 논문은 고속 임베디드 시스템에 사용하기 위해 CMOS AD 변환기(Analog-to-Digital Converter)를 설계하였다. 이 AD 변환기는 효율적인 구조로 설계하기 위하여 전압을 예측할 수 있는 플래시 AD 변환기와 자동 영을 기반으로 하여 설계된 비교기를 사용하였다. 이 구조의 변환속도는 기존의 플래시 AD 변환기와 거의 같지만 비교기와 연결된 회로가 줄어들었기 때문에 전체 회로의 크기를 크게 줄일 수 있었다. 이 ADC는 $0.25{\mu}m$ 디지털 CMOS 기술로 구현되었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.137-140
• /
• 2002

This paper is proposed a 8-bit anolog to digital converter for CMOS image sensor. A anolog to digital converter for CMOS image sensor is required function to control gain. Proposed anolog to digital converter is used frequency divider to control gain. At 3.3 Volt power supply, total static power dissipation is 8mW and programmable gain control range is 30dB. The gain control range can be easily increased with insertion of additional flip-flop at divided-by-N frequency divider circuit.

• Journal of information and communication convergence engineering
• /
• 제14권4호
• /
• pp.268-271
• /
• 2016

An efficient inductive switching noise suppression technique for mixed-signal integrated circuits (ICs) using standard CMOS digital technology is proposed. The proposed design technique uses a parallel RC circuit, which provides a damping path for the switching noise. The proposed design technique is used for designing a mixed-signal circuit composed of a ring oscillator, a digital output buffer, and an analog noise sensor node for $0.13-{\mu}m$ CMOS digital IC technology. Simulation results show a 47% reduction in the on-chip inductive switching noise coupling from the noisy digital to the analog blocks in the same substrate without an additional propagation delay. The increased power consumption due to the damping resistor is only 67% of that of the conventional source damping technique. This design can be widely used for any kind of analog and high frequency digital mixed-signal circuits in CMOS technology

• 전자공학회논문지C
• /
• 제35C권9호
• /
• pp.57-63
• /
• 1998

본 논문에서는 새로운 디지털-아날로그 변환알고리즘을 적용한 CMOS 디지털-아날로그 변환기를 개발하였다. 이 변환기를 1.2㎛ MOSIS SCMOS 파라미터로 설계하여 시뮬레이션으로 그 성능을 확인해 본 결과 200MHz의 최대변환속도와 7.41mW의 DC 소모전력을 나타내었고 8-b에서 각각 ±0.008LSB의 INL(integral nonlinearity)과 ±0.098LSB의 DNL(differential nonlinearity)를 나타내었다.

• 전자공학회논문지C
• /
• 제36C권11호
• /
• pp.10-17
• /
• 1999

본 논문에서는 MOS 트랜지스터로만 이루어진 CMOS IADC(Current-mode Analog-to-Digital Converter)를 설계하였다. 각 단은 CSH(Current Sample-and-Hold)와 CCMP(Current Comparator)로 구성된 1.5-비트 비트 셀로 구성되었다. 비트 셀 전단은 CFT(Clock Feedthrough)가 제거된 9-비트 해상도의 차동 CSH를 배치하였고, 각 단 비트 셀의 ADSC(Analog-to-Digital Subconverter)는 2개의 래치 CCMP로 구성되었다. 제안된 IADC를 현대 0.65 ㎛ CMOS 파라미터로 ACAD 시뮬레이션 한 결과, 20 Ms/s에서 100 ㎑의 입력 신호에 대한 SINAD(Signal to Noise-Plus-Distortion)은 47 ㏈ SNR (Signal-to-Noise)는 50 ㏈(8-bit)을 얻었고 35.7 ㎽ 소비전력 특성을 나타냈다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.970-973
• /
• 2003

Abstract An idea to redce the direct-path short circuit current of the CMOS digital integrated circuit is present. The sample circuit model of the CMOS digital circuit is the CMOS current-control digital output driver circuit, which are also suitable for the low voltage supply integrated circuits as the simple digital inverter, are present in this title. The circuit consists of active MOS load as the current control source, which construct from the saturated n-channel and p-channel MOSFET and the general CMOS inverter circuits. The saturated MOSFET bias can control the output current and the frequency response of the circuit. The experimental results show that lower short circuit current control can make the lower frequency response of the circuit.

• Imaging Science in Dentistry
• /
• 제34권1호
• /
• pp.1-5
• /
• 2004

Purpose: To evaluate the diagnostic accuracy of occlusal and proximal caries detection using CCD, CMOS, PSP and film system. Materials and Methods : 32 occlusal and 30 proximal tooth surfaces were radiographed under standardized conditions using 3 digital systems; CCD (CDX-2000HQ, Biomedysis Co., Seoul, Korea), CMOS (Schick, Schick Inc., Long Island, USA), PSP (Digora/sup (R)/FMX, Orion Co./Soredex, Helsinki, Finland) and I film system (Kodak Insight, Eastman Kodak, Rochester, USA). 5 observers examined the radiographs for occlusal and proximal caries using a 5-point confidence scale. The presence of caries was validated histologically and radiographically. Diagnostic accuracy was evaluated using ROC curve areas (Az). Results: Analysis using ROC curves revealed the area under each curve which indicated a diagnostic accuracy. For occlusal caries, Kodak Insight film had an Az of 0.765, CCD one of 0.730, CMOS one of 0.742 and PSP one of 0.735. For proximal caries, Kodak Insight film had an Az of 0.833, CCD one of 0.832, CMOS one of 0.828 and PSP one of 0.868. No statistically significant difference was noted between any of the imaging modalities. Conclusion: CCD, CMOS, PSP and film performed equally well in the detection of occlusal and proximal dental caries. CCD, CMOS and PSP-based digital images provided a level of diagnostic performance comparable to Kodak Insight film.

• 대한전자공학회논문지
• /
• 제24권4호
• /
• pp.652-657
• /
• 1987

This paper describes an application of CMOS Gate Array Integrated Cricuits to the implementation of three functional units: A Multiplexer, Time Switch, and Demultiplexer in the Switching Network and Digital Line Concentrator of TDX-1 system, which is a fully digital time division electronic switching system in Korea. The application of CMOS Gate Array Integrated Circuits significantly improves the overall system performance in terms of power consumption, cost, size, reliability, and timing margin, etc.

• 방송과미디어
• /
• 제5권1호
• /
• pp.59-71
• /
• 2000

This paper presents a survey of the CMOs-based image sensor and its applications to various real field digital camera. CMOS image sensor, called active pixel sensor (APS), has many interesting properties such ash I회 sensitivity, high speed readout, random access and lower power consumption when it is compared with CCd. this paper also addresses the state-of-the-art of CMOS image sensor, and gives some examples of its application to digital camera and special-purpose cameras. with the advancement of semiconductor technology, CMOS image sensor is a future technology for imaging system, and will be widely used in the filed of image capturing for consumer electronics and scientific measurements.