• 한국멀티미디어학회논문지
• /
• 제23권5호
• /
• pp.633-640
• /
• 2020

Defect region segmentation of TFT-LCD images is performed by combining defect pixels detected by a defect detection method into defect region, or by using morphological operations to segment defect region. Therefore, the result of segmentation of the defect region is highly dependent on the defect detection result. In this paper, we propose a method which segments defect regions sequentially according to the possibility of being included in defect regions in TFT-LCD images. The proposed method repeats the process of detecting a seed using the median value and the median absolute deviation of the image, and segments the defect region using the seeded region growing method. We confirmed the superiority of the proposed method to segment defect regions using pseudo-images and real TFT-LCD images.

• 한국산업정보학회논문지
• /
• 제20권2호
• /
• pp.73-83
• /
• 2015

본 논문에서는 순차적 결함 검출 방법을 이용하여 TFT-LCD의 결함 영역(Blob)을 효과적으로 검출하는 알고리즘을 제안한다. 먼저 결함과 배경 간의 휘도 차를 이용하여 영상의 각 화소들에 대한 결함 확률을 판단하고, 결함 확률에 따른 순차적 결함 검출 방법을 이용하여 결함 후보 화소를 검출한다. 여기서 결함 확률이란 결함 후보 화소가 검출된 단계에 따라 결함 영역에 포함될 가능성을 나타내다. 형태학 연산을 적용함으로써 검출된 후보 화소들을 후보 결함 영역으로 형성하고, 각 후보 결함 영역에 대한 결함 가능성을 계산하여 결함 영역을 검출한다. 모의 TFT-LCD 영상을 생성하여 제안 방법의 타당성을 검증하고, 실제 TFT-LCD 영상에 적용함으로서 제안 알고리즘의 우수한 결함 검출 성능을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 추계학술대회 논문집 학회본부
• /
• pp.112-114
• /
• 1991

This paper describes an application of neural network to diagnose defect of induction motor and investigates possibility to construct defect diagnosis system to be operated without special knowledge. For defect diagnosis, frequency spectrum of vibration is utilized. Learning method of applied neural network is back propagation.

• 한국건축시공학회지
• /
• 제7권4호
• /
• pp.125-132
• /
• 2007

The use of Self-Leveling material is increasing recently. This paper assesses the quality of surface layer of concrete floor when Self-Leveling material is defective. The paper shows how to predict the defect of SL material before construction begins. The relationship between the quality of surface layer of concrete floor and the defect of SL material was determined and the quality of surface layer of concrete floor was then estimated. The relations between the quality of surface layer and the defect of SL material were determine considering surface strength, moisture, and consistency of surface layer. Absorbing amount was used as the indicator of consistency and the absorbing amount of test material was measured. Then the relations between the test material and surface strength were determined. Generally concrete floor with greater consistency has greater surface strength, however in this study, we hound that high impact concrete floor could have lower surface strength as the consistency gets bigger. The relations between the level of defect occurred in SL material and the quality of surface layer were examined and we clarified that the surface layer with lower consistency gets higher possibility to occur exfoliation in early stage, one or two weeks after constructing SL material. When the consistency is sufficient, the occurring situation of defect depends upon the moisture of surface layer. Little amount of moisture gets higher possibility not to occur the defect. As the amount increases, fissure generates and early exfoliation may occur. In addition, the level of fissure is highly related with the surface strength.

• 전자공학회논문지
• /
• 제51권4호
• /
• pp.123-130
• /
• 2014

TFT-LCD 영상에서 결함은 일반적으로 배경과 비교하여 밝기 차이가 큰 특징을 사용하여 검출된다. 본 논문에서는 휘도 차에 따른 결함 가능성이 높은 순으로 결함을 검출하는 순차적 결함 검출 방법을 제안한다. 제안한 방법은 배경과의 휘도 차가 큰 결함은 정확히 검출하고, 배경과의 휘도 차가 작은 결함인 한도결함도보다 신뢰있게 검출하여 과검출을 최소화할 수 있다. 실험을 통해 제안한 방법은 배경과의 휘도 차가 큰 결함뿐만 아니라 한도결함에 대해서도 우수한 검출 결과를 나타냄을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.195-198
• /
• 2001

Backside defect of plate structure may grow due to fatigue or overload to cause critical failure during operation, so it is important to detect this kind of defect in line. For this purpose, nondestructive, non-contact and highly sensitive method is required. ESPI and Shearography are considered as useful method to satisfy these requirements. In this paper, the possibility of application of ESPI and Shearography to detect the backside defect of steel plate and to quantify the defect size was tested. For the experiment, some steel plates with defect on the backside were prepared. Experimental results for these plates showed that location and size of defect could be detected correctly by both of ESPI and Shearography.

• 한국세라믹학회지
• /
• 제42권1호
• /
• pp.1-6
• /
• 2005

In aqueous alumina tape casting, the effects of altering the composition of the suspensions, the binders and the casting thickness were studied. The rheological behavior of the suspensions and the defects of the dried tapes were examined and the relationships between them are discussed. The changes in the defect regions reported in the previous paper were related with the rheological properties with variations of the binder, the composition and the casting thickness. The shear thinning factor increased with the organic content and the solid content (the decrease of water content). The apparent viscosity increased with the shear thinning factor. The relation between the shear thinning factor and the log apparent viscosity was similar for all binder types. In the relation between the defect free region and the rheological properties, the defect free region became narrower with increasing casting thickness. The defect free region is independent of binder type. Therefore, the thicker tape is more difficult to produce in aqueous alumina tape casting. Knowledge of the rheological properties of the suspensions could help Predict the defect type and the possibility of defect free dried tapes.

• 소성∙가공
• /
• 제21권5호
• /
• pp.291-297
• /
• 2012

In this paper, the effect of back tension in multi-pass drawing or wiredrawing on the central bursting defect is investigated using finite element predictions. A rigid-plastic finite element method was used together with the McClintock damage model. Central bursting defects under different back tension stress values ranging from 0% to 20% of the yield strength of the material were predicted and they were compared to understand the effect of the back tension stress values on the central bursting defect. It is found that the level of back tension has a strong influence on the cumulative damage. Thus, higher back tension raises the possibility of the central bursting defect occurring, even though it decreases the interfacial pressure between the die and the work piece.

• 전자공학회논문지 IE
• /
• 제48권4호
• /
• pp.1-6
• /
• 2011

본 논문에서는 LCD 제조공정 상에서 발생할 수 있는 결함을 검사하고 분류할 수 있는 적응적인 LCD 표면 결함 검사 시스템을 제안하였다. 즉, 반복되는 LCD 패턴의 주기를 확정한 후에 결함 패턴을 검출하고 검출된 결함 패턴의 특징을 계산하여 결함을 분류하였다. 그리고 결함을 검출하는 과정에서 발생하는 잡음은 모폴로지 연산자를 이용하여 제거하였다. 또한, 검출된 결함 패턴에서 기하학적인 특징과 통계적 특징을 계산한 후 신경회로망 알고리즘을 이용하여 여러 종류의 결함 패턴을 적응적으로 분류하였으며, 실험 결과 92.3%의 결함 검출율 및 94.5%의 결함 분류 및 인식율을 획득함으로써, LCD 결함 검사 시스템의 실질적인 구현 가능성을 제시하였다.

• 한국산업정보학회논문지
• /
• 제19권6호
• /
• pp.43-51
• /
• 2014

TFT-LCD 영상은 다양한 특성의 결함을 포함하고 있다. 배경 영역과의 휘도 차이가 커서 육안으로 식별 가능한 결함부터 휘도 차이가 매우 적어서 육안 검출이 어려운 한도성 결함까지 포함한다. 본 논문에서는 휘도 차이를 이용하여 결함 영역에 포함될 확률이 높은 결함 화소부터 순차적으로 단계를 진행하면서 결함 후보 화소를 검출하고, 검출된 후보 화소를 블랍으로 구성하여 블랍의 크기와 주변 영역과의 휘도차이를 이용한 기법을 통해 최종적으로 결함 영역과 잡음을 구분하여 검출하는 알고리즘을 제안한다. 제안한 알고리즘의 타당성을 확인하기 위해 다양한 결함을 포함하는 영상에 대한 실험 결과를 살펴봄으로써 신뢰도 높은 결함 검출 결과를 입증하였다.