• Journal of Electrochemical Science and Technology
• /
• v.12 no.4
• /
• pp.387-397
• /
• 2021

Deep eutectic solvents have been established as feasible metal electroplating solvent alternatives over traditional toxic aqueous plating baths. However, water, either added intentionally or unintentionally, can significantly influence the solvent's physical properties and performance, thereby hindering its industry application. In this study, the hygroscopicity, or the ability to absorb moisture from the environment, of synthesized ethaline (1:2 choline chloride:ethylene glycol) was investigated. The kinematic viscosity, electrical conductivity, electrochemical window, and water content of ethaline were monitored over a 2-week period. Karl Fischer titration tests showed that ethaline exposed to the atmosphere displayed significant hygroscopicity compared to its unexposed counterpart. ¹H NMR spectroscopy revealed that water vapor was readily absorbed at the surface due to the hydrophilic groups present in the ethaline molecule. Water uptake resulted in the decrease in viscosity, increase in electrical conductivity and narrowing of the electrochemical window of ethaline. Solution heating at 100℃ removed the absorbed moisture and allowed the recovery of the solvent's initial properties.

• Journal of the Korean Institute of Gas
• /
• v.26 no.3
• /
• pp.21-26
• /
• 2022

Zinc is emerging as a environment-friendly plating material to replace cadmium, which is harmful to the human body, to prevent hydrogen gas penetration or release from metal materials. Electroplating of Zn and Zn alloys, which is usually performed in an aqueous acidic atmosphere, has disadvantages such as low coulombic efficiency, corrosion, and hydrogen release, resulting in industrial use difficult. In this study, a deep-eutectic solvent was synthesized using choline chloride and ethylene glycol. Using this as a solvent, an electrolyte for Zn plating was prepared, and then zinc was plated on the STS 304 substrate. The surface microstructure and roughness were observed using SEM and AFM. The crystal structure of the electro-plated film was analyzed using XRD. Finally, the preventing effects of hydrogen release through Zn-based deep-eutectic plating on the STS 304 substrate were compared with the uncoated substrate.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.6
• /
• pp.436-447
• /
• 2022

Lignocellulose nanofibrils (LCNFs) were prepared using a two-step deep eutectic solvent (DES) and enzymatic pretreatment followed by mechanical defibrillation, and we examined the effects of enzymatic pretreatment conditions on different characteristics of the LCNFs thus obtained. The LCNFs yielded using the two-step DES pretreatment (Enz-LCNF) exhibited a well-defibrillated entangled web-like structure with an average fiber diameter ranging from 15.7 to 20.4 nm. Furthermore, we found that the average diameter and filtration time of the Enz-LCNFs decreased with an increase in enzyme concentration and enzymatic treatment time, whereas we detected a concomitant reduction in the tensile strength of the Enz-LCNF sheets. The Enz-LCNFs were characterized by a typical cellulose I structure, thereby indicating that the enzymatic treatment causes very little damage to the crystalline form.

• Korean Chemical Engineering Research
• /
• v.52 no.4
• /
• pp.481-485
• /
• 2014

The applicability of the dipping, ultrasonic-assisted, heating methods to the extraction of useful components from Zostera marina was investigated. For the increase of the extraction yield of caffeic acid and rosmarinic acid from Zostera marina, ionic liquids and DES were used as additives in the extraction solvent. The optimum extraction conditions were found: dipping extraction, methanol as extraction solvent, 0.005 g of freeze-dried material powder, 5 mL methanol, 30 min and 0.5 g of DES-3 ($Et_4NCl$ and phenol) as additive. As a result, 0.19 mg/g of caffeic acid and 8.48 mg/g of rosmarinic acid were obtained. This method is simple and sensitive, and has been applied successfully to determine the component of caffeic acid and rosmarinic acid in Zostera marina and these results indicate that DES were used as additives is more suitable than traditional extraction for the extraction of useful components from Zostera marina.

• Analytical Science and Technology
• /
• v.36 no.3
• /
• pp.128-134
• /
• 2023

Centella asiatica (C. asiatica) extracts, including asiaticoside and madecassoside, are used in ointments to treat the wound and atopic dermatitis due to their antibacterial and skin-regenerating effects in Asia. Therefore, research on the cultivation and extraction efficiency of C. asiatica is being actively conducted to increase commercialization efficiency. In this study, various deep eutectic solvents (DESs) were prepared and used as the extraction solvents according to the mole ratio between the hydrogen bond acceptor (HBA) and hydrogen bond donor (HBD). And then, the extraction yields in distilled water (DW) and methanol (MeOH), commonly used extraction solvents for C. asiatica, were compared and analyzed by HPLC in the optimized operating condition. As a result, a mixture of DW and DES at a ratio of 3:7 showed about 1.4 times higher extraction efficiency than MeOH only. Conversely, the extraction efficiency in a mixture of MeOH and DES at a ratio of 3:7 was about 6 % lower than that in MeOH only.

• Journal of Electrochemical Science and Technology
• /
• v.11 no.3
• /
• pp.291-309
• /
• 2020

Chromium was electrodeposited from deep eutectic solvents-based Cr³⁺ electrolytes on HB-pencil graphite electrode. Factors influencing the electrochemical behavior and the processes of Cr nucleation and growth were explored using cyclic voltammetry and chronoamperometry techniques, respectively. Cr³⁺ reduction was found to occur through an irreversible diffusion-controlled step followed by another irreversible one of impure diffusional behaviour. The reduction behavior was found to be greatly affected by Cr³⁺ concentration, temperature, and type of hydrogen bond donor used in deep eutectic solvents (DESs) preparation. A more comprehensive model was suggested and successfully applied to extract a consistent data relevant to Cr nucleation kinetics from the experimental current density transients. The potential, the temperature, and the hydrogen bond donor type were estimated to be critical factors controlling Cr nucleation. The nucleation and growth processes of Cr from either choline chloride/ethylene glycol (EG-DES) or choline chloride/urea (U-DES) deep eutectic solvents were evaluated at 70℃ to be three-dimensional (3D) instantaneous and diffusion-controlled, respectively. However, the kinetics of Cr nucleation from EG-DES was found to be faster than that from U-DES. Cr nucleation was tending to be instantaneous at higher temperature, potential, and Cr³⁺ concentration. Cr nuclei electrodeposited from EG-DES were characterized at different conditions using scanning electron microscope (SEM). SEM images show that high number density of fine spherical nuclei of almost same sizes was nearly obtained at higher temperature and more negative potential. Energy dispersive spectroscopy (EDS) analysis confirms that Cr deposits were obtained.

• Journal of Forest and Environmental Science
• /
• v.36 no.2
• /
• pp.69-77
• /
• 2020

Lignocellulosic biomass has recalcitrant characteristics against chemical and biological conversion due to its structural heterogeneity and complexity. The pretreatment process to overcome these recalcitrant properties is essential, especially for the biochemical conversion of lignocellulosic biomass. In recent years, pretreatment methods using ionic liquids (ILs) and deep eutectic solvents (DESs) as the green solvent has attracted great attention because of their advantages such as easy recovery, chemical stability, temperature stability, nonflammability, low vapor pressure, and wide liquids range. However, there are some limitations such as high viscosity, poor economical feasibility, etc. to be solved for practical use. This paper reviewed the research activities on the pretreatment effect of various ILs including DESs and their co-solvents with organic solvents on the enzymatic saccharification efficiency of lignocellulosic biomass and the nanocellulose preparation from the pretreated products.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.2
• /
• pp.28-33
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on properties of TMP fibers and handsheets. DES was prepared by mixing of lactic acid and betaine (L and B), and the molar ratio of these two components mixtures was controlled to 2:1 (L:B=2:1) and 5:1 (L:B=5:1). As results, lignin was partly extracted from the TMP fibers. Especially, the delignification of TMP samples was promoted according to the increase of the molar ratio of lactic acid. Except for tear index, both tensile index and burst index of handsheets were increased when higher molar ratio of lactic acid was mixed for DES preparation. However, the LB DES treatment of TMP fibers didn't give any effect on the optical properties of TMP handsheets. The plausibility of TMP fiber was to be enhanced by LB DES treatment.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.48 no.1
• /
• pp.75-81
• /
• 2016

This study was conducted to investigate the effects of deep eutectic solvent (DES) treatment on BCTMP fibers and handsheets properties. DES was prepared using lactic acid and betaine (LB), and the molar ratio of these two components mixtures was controlled to 2:1 (LB 2:1) and 5:1 (LB 5:1). As results, 2% of BCTMP pulp (o.d. weight) was extracted when it was treated by LB 5:1 at $50^{\circ}C$ for 12 hours, stirring constantly at 120 rpm. In contrast, lignin was not extracted when BCTMP was mildly treated by the LB DES mixed with 50% of distilled water at the reacting condition of temperature $60^{\circ}C$ for 2 hours using water bath. These results indicate that conditioned water content and adequate reaction time are needed to achieve effective extraction of lignin. It was also found that stiffening of cellulose fiber due to the mild treatment of LB DES to BCTMP fiber leads to the increase of paper bulk without the loss of strength.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.148-155
• /
• 2018

To get a better understanding of the effect of physicochemical properties and microstructure on $SO_2$ absorption behavior of DESs with different molar ratios of EmimCl and EG (from 2:1 to 1:2), densities (${\rho}$), viscosities (${\eta}$), speeds of sound (u), refractive indices ($n_D$), and thermal decomposition temperatures ($T_d$) of EmimCl-EG DESs were measured and used to obtain the other derived properties, such as thermal expansion coefficient (${\alpha}_p$) and activation energy for viscous flow ($E_{\eta}$). Moreover, FT-IR spectra and in situ variable-temperature NMR spectroscopy were employed to study the microstructures of DESs. Based on physicochemical and spectroscopic properties, the influence of the concentrations of EmimCl on the interactions in DESs was explored to be associated with their $SO_2$ absorption behavior. The results show that the interactions between $Emim^+$ and $Cl^-$ of EmimCl is gradually weakening with increasing the concentration of EG in DESs by forming of hydrogen bond interaction of $O-H{\cdots}Cl^-$, resulting in a decrease of ${\rho}$, ${\eta}$, u, $n_D$, and $T_d$ of DESs, and hindering the charge-transfer interaction of $SO_2$ with $Cl^-$ and deceasing $SO_2$ capture capacity. Moreover, the $SO_2$ absorption capacity of DESs is proportional to their ${\rho}$ and $E_{\eta}$, respectively.