• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11B
• /
• pp.1588-1595
• /
• 2010

DVB-C2 is the next generation digital broadcasting standard which will replace the analog cable broadcasting. LDPC and BCH significantly increase performance of forward error correction and allows for the application of higher constellation. Additionally, DVB-C2 is based on OFDM instead of single-carrier modulation, which gives additional flexibility and robustness in typical cable channels. This paper will give an introduction to the DVB-C2 system and spectral efficiency of DVB-C2 compare with DVB-C. Finally, The the simulation which is using BICM and OFDM structure show the performance of the DVB-C2.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2113-2120
• /
• 2015

This paper presents an integrated receiver to support multimode broadcasting standards such as DVB-T2, DVB-C2, and DVB-S2 in a single platform. The integrated receiver consists of a tuner block, a receiver engine, a frame processor, and an A/V decoder. The receiver engine includes a channel decoding engine and a demodulation engine to perform OFDM and APSK demodulations. The frame processor performs deinterleaving and BB frame decoding functions. The demodulator engine and the frame processor are implemented in two FPGA devices and DSP-based embedded software, respectively. To verify the functionality of the integrated receiver, it is tested in the laboratory. Commercial PC-based modulators are used to generate the DVB-T2, DVB-C2, and DVB-S2 modulated signals. The integrated receiver was tested under various operation modes as specified in the standards such as DVB-T2, DVB-C2, and DVB-S2 and showed successful operation in all the scenarios tested.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.272-274
• /
• 2011

최근 들어 케이블 방송망을 기반으로 한 디지털 방송, VoIP(Voice over Internet Protocol), VOD(Video on Demand), 영상전화, 이동전화, 무선 랜 로밍 등의 다양한 멀티미디어 서비스의 출현과 향후 도입될 새로운 융합형 멀티미디어 서비스의 수용을 위해 케이블 망의 고도화에 대한 요구가 제기되었다. 특히 유럽을 중심으로 이러한 요구를 만족시키기 위해 DVB(Digital Video Broadcasting)-C2 규격의 개발이 진행되었다. DVB-C2 규격에서는 기존의 게이블 전송 규격인 DVB-C에 대해 30% 이상의 전송 효율을 높이고자 새로운 변조 방식과 채널 오류정정 부호 방식을 도입하였다. 이에 본 논문은 본 논문에서는 DVB-C2 규격에서 도입된 채널 오류정정 부호인 BCH(Bose, Chaudhuri, and Hocquenghem) 부호와 LDPC(Low Density Parity Check) 부호의 연접 방식에 대한 성능을 검증하고자 한다. 이를 위해 개발된 시뮬레이터의 소개와 이를 통한 시험결과를 제시한다.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.4 s.62
• /
• pp.49-60
• /
• 2006

The ion exchange resins have been synthesized from chlormethyl styrene - 1,4 - divinylbenzene(DVB) with 1%, 2%, 4% and 8%-crosslinking and 1-aza-18-crown-6 macrocyclic ligand by copolymerization method. Content of chlorine in styrene-DVB copolymer was decreased as crosslink increased and it is because as crosslink increased 1%, 2%, 4% and 8% DVB content increased and crosslink density increased and cavity was reduced. Functional group of resin almost disappeared as C-C1 peak around $700cm^{-1}$ was substituted with 1-aza-18-C-6 macrocyclic ligand and new peak of C-N around $1020cm^{-1}$ appeared, so it was confirmed that styrene-DVB copolymer and ligand were compounded. As crosslink increased in the analysis of element contents, it resulted in the reduction of nitrogen content and it is because as crosslink increased, it led to the reduction of chlorine content in the process of substitution reaction and it affected macrocyclic ligand substituted. Thermo analysis curve of functional synthetic resin decomposed three part of 1-aza-18-C-6, styrene, and DVB. Form of functional synthetic resin showed distortion of its particles as macrocyclic ligand was introduced to styrene-DVB copolymer and hydrogen of ligand caused substitution with chlorine element of styrene molecule.

• Review of Korean Society for Internet Information
• /
• v.11 no.2
• /
• pp.23-29
• /
• 2010

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.485-497
• /
• 2009

In this paper, we described DVB-S2 system for mobility. cross layer coding technique are needed to maintain the performance in deep fading channel. Cross layer coding is divided into two kinds of level. First level is Physical layer coding and, second layer is link layer or upper layer coding. Fixed on DVB-S2 short frame coding method as a physical layer, we simulated the various coding method as an upper layer coding. Furthermore, we analyzed the performance of each coding method on according to mobile vehicle speed, data rate, interleaving memory size, and IP packet size.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.12
• /
• pp.1846-1854
• /
• 2022

The sophistication and diversification of mission equipment for surveillance and reconnaissance is leading to a demand for large-capacity public data links. Overseas, a T4 class(274Mbps) common data link was applied to the Global hwak, a high-altitude unmanned aerial vehicle, and various research and development are being conducted in Korea. In this paper, we propose a structure in which pilot is additionally applied to improve SNR performance while minimizing data transmission rate loss in the DVB-S2 frame structure, which is a european satellite broadcasting standard, for high-capacity transmission of T4 class or higher in the common data link. For the performance evaluation of the proposed structure, the performance of the DVB-S2 was compared and analyzed by simulating the UAV data link channel environment. As a result of simulation, 0.15% of transmission rate loss occurred at T4 class transmission rate compared to DVB-S2 in the proposed structure, but improved SNR reception performance of 0.2~0.3dB was confirmed in the UAV channel environment.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.591-595
• /
• 2011

In this paper, we design the hardware architecture of the BICM(Bit Interleaved Coded Modulation) module for next generation European broadcast system and implement the BICM module with DSP(Digital Signal Processor) TMS320C6474. Simulation result shows that the BER(Bit Error Rate) performance of the fixed-point BICM module using more than 8 bits is very similar to that of the floating-point BICM module.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.2
• /
• pp.196-201
• /
• 2013

In this paper, we proposed high speed LDPC encoder architecture for DVB-S2 standard. In conventional algorithm, the processes of parity calculations are serial fashion. Therefore conventional algorithm need clocks of number of parity. The proposed LDPC encoding architecture is based on a parallel 360 bits-wise operations. The key issues for realizing high speed are using the two kinds of index addresses and make use of memories efficiently. We implemented a half rate LDPC encoder on an FPGA, and confirmed its maximum throughput is up to 10 Gbps on 100MHz clock.

• Journal of environmental and Sanitary engineering
• /
• v.19 no.3 s.53
• /
• pp.52-57
• /
• 2004

Content of chlorine in s쇼rene-DVB copolymer was decreased as crosslink increased and it is because as crosslink increased $1\%,\;2\%,\;5\%\;and\;10\%$ DVB content increased and crosslink density increased and cavity was reduced. Functional group of resin almost disappeared as C-C1 peak around $700cm^{-1}$ was substituted with 1-aza-12-C-4 macrocyclic ligand and new peak of C-N around $1020cm^{-1}$ appeared, so it was confirmed that styrene-DVB copolymer and ligand were compounded. As crosslink increased in the analysis of element contents, it resulted in the reduction of nitrogen content and it is because as crosslink increased, it led to the reduction of chlorine content in the process of substitution reaction and it affected macrocyclic ligand substituted. Form of functional synthetic resin showed distortion of its particles as macrocyclic ligand was introduced to styrene-DVB copolymer and hydrogen of ligand caused substitution with chlorine element of styrene molecule.