• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.5
• /
• pp.513-519
• /
• 2013

Line scan camera has been widely used in the area of inspection of glass, film, fabric, iron, PCB and etc. due to the high resolution and the high speed. We developed the line scan based vision system to inspect tangled and cut-off status of yarn in the manufacturing process. The original image is binarized with a proper threshold, and the gap distances in the yarn are measured in real time, so finally the status of the process is decided by the maximum value of the gap distance. All procedures are executed in real time by realization of multi-processed threads. By implementation of this system, the error of the yarn in manufacturing process can be precedently monitored and the loss of the yarn is decreased efficiently.

• Journal of KIISE:Databases
• /
• v.28 no.3
• /
• pp.373-383
• /
• 2001

The distance join is a spatial join which finds data pairs in the order of distance when associating two spatial data sets. This paper proposes several methods to optimize the adaptive multi-stage distance join, presented in [1]. First, we optimize the sweeping index formula which is used for selecting sweeping axis during plane sweeping. Second, to improve the performance of a priority queue used for maintaining node pairs, we propose to use the maximum distance of a node pair as the second priority of the queue. Moreover, we compare trade-offs in estimating the cut-off distance between under uniformity assumption of data distribution and non-uniformity assumption. The experiments show that the proposed methods greatly improve the performance of the algorithm in CPU cost as well as in I/O cost.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.3
• /
• pp.65-70
• /
• 2006

The AWJM(Abrasive Water-jet Machining) technology is one of the cutting technologies, which can cut various materials with 2 or 3 times of the speed of sound. In this study, processing conditions such as jet-pressure, cutting speed, orifice diameter and stand-off distance, are used by following the design of experiments with 3 levels. Al6061 material which is normally applied on the field, is applied. Through the S/N ratio analysis with measured values, the optimization value of processing conditions to minimize the surface roughness and taper value is obtained. The order of significance is as follows; jet pressure, cutting speed, abrasive mixing ratio, orifice diameter and stand-off distance. RSM(Response Surface Method) is applied to find the optimal processing conditions to minimize both the surface roughness and the taper value by using jet pressure, cutting speed and abrasive mixing ratio.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1085-1091
• /
• 2018

Study Design: Case-control. Purpose: To determine optimal cut-off value for body mass index (BMI) in predicting surgical success in patients with lumbar spinal canal stenosis (LSCS). Overview of Literature: BMI is an essential variable in the assessment of patients with LSCS. Methods: We conducted a prospective study with obese and non-obese LSCS surgical patients and analyzed data on age, sex, duration of symptoms, walking distance, morphologic grade of stenosis, BMI, postoperative complications, and functional disability. Obesity was defined as BMI of ${\geq}30kg/m^2$. Patients completed the Oswestry Disability Index (ODI) questionnaire before surgery and 2 years after surgery. Surgical success was defined as ${\geq}30%$ improvement from the baseline ODI score. Receiver operating characteristic (ROC) analysis was used to estimate the optimal cut-off values of BMI to predict surgical success. In addition, correlation was assessed between BMI and stenosis grade based on morphology as defined by Schizas and colleague in total, 189 patients were eligible to enter the study. Results: Mean age of patients was $61.5{\pm}9.6years$. Mean follow-up was $36{\pm}12months$. Most patients (88.4%) were classified with grades C (severe stenosis) and D (extreme stenosis). Post-surgical success was 85.7% at the 2-year follow-up. A weak correlation was observed between morphologic grade of stenosis and BMI. Rates of postoperative complications were similar between patients who were obese and those who were non-obese. Both cohorts had similar degree of improvement in the ODI at the 2-year followup. However, patients who were non-obese presented significantly higher surgical success than those who were obese. In ROC curve analysis, a cut-off value of ${\leq}29.1kg/m^2$ for BMI in patients with LSCS was suggestive of surgical success, with 81.1% sensitivity and 82.2% specificity (area under the curve, 0.857; 95% confidence interval, 0.788-0.927). Conclusion: This study showed that the BMI can be considered a parameter for predicting surgical success in patients with LSCS and can be useful in clinical practice.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.53 no.8
• /
• pp.432-437
• /
• 2004

Since the characteristic frequency is decreased in proportion to the fault distance, the characteristic frequency component may be insufficiently eliminated by a low-pass filter on a long transmission line. In order to set a standard for the cut-off frequency of the low-pass filter, this paper proposes a method for obtaining the characteristic frequencies due to line faults. The application results of the proposed method are presented for line to ground (LG) faults and line to line (LL) faults on a 345 kV 200 km overhead transmission line. The EMTP is used to generate fault signals under different fault locations and fault inception angles. By comparison between the characteristic frequencies obtained from the proposed method and the EMTP simulation, it is shown that the proposed method accurately obtains the characteristic frequency.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.35 no.4
• /
• pp.248-252
• /
• 2009

Purpose: This retrospective study was performed to analyze the relationship between complications of the posterior mandibular single crowns and distance from the adjacent teeth to the implant. Subjects and Methods: Of the patients who presented Ewha Womans University Mokdong Hospital & Yonsei University Dental Hospital with missing of the posterior mandibular molar and restored with implant-supported 18 Single crowns between 1996 thru 2007, 115 patients had been followed after crown delivery. The subjects were divided into complication-followed group and a control without any problems. The distance from the most distal tooth to the implant were measured. The prosthetic & biologic complications were reviewed by the cantilever distance and analyzed by abutment type, age & gender statistically using SAS version 9.1 (SAS Inc., USA). Results and Conclusion The results were as follows; 1) The posterior mandibular single crown with cantilever showed higher incidence of follow-up complications upon logistic analysis (p<0.05). 2) The prosthetic and biologic complications are related with the cantilever distance with 2.1 odds ratio and 3.39 cut-off value of specificity & sensitivity by SPSS 12.0. 3) The complications are neither significant in abutment types nor age & gender.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.3
• /
• pp.63-69
• /
• 2022

In this paper, we propose a new GPU-based framework for quickly calculating adaptive and continuous SDF(Signed distance fields), and examine cases related to rendering/collision processing using them. The quadtree constructed from the triangle mesh is transferred to the GPU memory, and the Euclidean distance to the triangle is processed in parallel for each thread by using it to find the shortest continuous distance without discontinuity in the adaptive grid space. In this process, it is shown through experiments that the cut-off view of the adaptive distance field, the distance value inquiry at a specific location, real-time raytracing, and collision handling can be performed quickly and efficiently. Using the proposed method, the adaptive sign distance field can be calculated quickly in about 1 second even on a high polygon mesh, so it is a method that can be fully utilized not only for rigid bodies but also for deformable bodies. It shows the stability of the algorithm through various experimental results whether it can accurately sample and represent distance values in various models.

• Journal of Navigation and Port Research
• /
• v.29 no.10 s.106
• /
• pp.859-863
• /
• 2005

This paper describes the improvement of power control characteristics of ship's emergency lighting power supply(SELPS), by which electric power is controlled extensively, and power ON-OFF is controlled and system parameter monitored in remote distance by PC serial communication. Proposed system is composed of step-down converter(SDC), emergency power supply circuit(EPSC), half bridge(HB) inverter, fluorescent lamp(FL) starting circuit, microprocessor control and multi communication circuit. Experimental works confirm that relative system stops when over current is detected and speedy and stable emergency power is supplied when main power source cut-off, and controls input power up to 35[$\%$] by adjusting pulse frequency of the HB inverter, and ON-OFF control of multiple SELS, real time transmission and monitor of parameters as to voltage, current, and power values are performed appropriately by PC communication.

• Journal of Korea Multimedia Society
• /
• v.17 no.2
• /
• pp.208-217
• /
• 2014

This paper propose an adaptive control of symmetry contribution based generalized symmetry transform. which can be controlled symmetry contribution according to the intensity orientation of two pixels. In the proposed method, we define the C-D(convergent and divergent)plane which represents convergence and divergence region of gradient pairs. and used the gaussian phase wight function, with respect to the distance from the gradient pair to an extreme point, in calculating the symmetry contribution. The proposed method can be detect the object more efficiently by adaptive controlling the cut-off frequency of the gaussian phase wight function. To evaluate a performance of the proposed method, we compare the proposed method and conventional GST method in various images including IR image. we prove that the proposed method have better performance in object detection.

• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.3124-3126
• /
• 2000

The application of IR(Infrared) communication is very wide and IR receiver has become a standard of home entertainment. A preamplifier with single 5V supply was designed for IR receiver IC. To operate at long distance, receiver IC should have high gain and low noise characteristic. To provide constant output signal magnitude, independent of transciever distance, gain limiting stage is needed. And to cut-off DC noise component effectively, large resistance and capacitance are required. Transimpedance type preamplifier, and diode limiting amplifier, and current limiting amplifier were designed. It is another function of current limiting amplifier that transforms single input signal to differential output signal. Using AMS BiCMOS model, both BJT version and MOS version was designed. Total power consumption is O.lmW, and IC size is $0.3mm^2$