• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.401-405
• /
• 2017

연속가변 추력기는 비행체의 위치 또는 자세 변경 및 연소실 내부의 압력 조절을 위하여 정밀 추력 조절이 요구된다. 이를 위하여 연소실 내부의 노즐 목 근처에 설치된 핀틀 구조물을 앞/뒤로 움직여 추력을 조절하고, 핀틀 구조물을 움직이기 위하여 구동장치를 사용한다. 본 논문에서는 연속가변 추력기용 구동장치를 개발하였으며, 운용조건에서의 부하를 모사하기 위한 부하시험장비를 개발하였다. 또한, 개발된 부하시험장비를 이용하여 구동장치의 성능 시험을 수행하였다.

• 대한전기학회논문지
• /
• 제41권6호
• /
• pp.607-614
• /
• 1992

A continuous variable structure system control for a DC servomotor tracking controller is proposed to alleviate the chattering problems. The stability property of the proposed algorithm is analyzed in detail. The prescribed tracking error is guaranteed under load variations based on the stability analysis. Through the comparative simulations between the proposed algorithm and the conventional VSS, the effectiveness of the proposed algorithm is proved.

• 대한전기학회논문지
• /
• 제38권9호
• /
• pp.671-683
• /
• 1989

A controller of interconnected power systems is investigated using an optimal multidimensional variable structure control. The switching hyperplane of the variable structure stabilizer is obtained by minimizing a quadratic performance index in continuous-time. A special feature of the optimal multidimensional variable structure stabilizer is that, when it is operated in the so-called sliding mode, the system response becomes insensitive to changes in the plant parameters. A digital simulation is performed by a digital computer using the Advanced Continuous Simulation Language (ACSL) package, which shows that the dynamic performance of the power system in response to mechanical torque changes is improved when optimal multidimensional variable sturcture stabilizers are employed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.190-194
• /
• 1987

This paper describes a new method for control of large-scale system by sliding mode. The concepts of control to large-scale system on the basis of VSS(Variable Structure System) control theory are used to decompose a large control problem into a two-level algorithm such that each subsystem is stabilized with local discontinuous controllers and higher level corrective control is designed to take into account the effect of interaction among the subsystems. In this paper, we show that each subsystem is controlled with repect to local continuous and higher level corrective control. This algorithm can be easily applied to multi-variable control system and obtained a continuous control in comparison With variable structure control systems. Two numerical examples are discussed as illustrations.

• Journal of Information Processing Systems
• /
• 제16권3호
• /
• pp.588-598
• /
• 2020

An alternative state estimation filtering algorithm is designed for continuous time systems with noises as well as control input. Two kinds of estimation filters, which have different measurement memory structures, are operated selectively in order to use both filters effectively as needed. Firstly, the estimation filter with infinite memory structure is operated for a certain continuous time system. Secondly, the estimation filter with finite memory structure is operated for temporarily uncertain continuous time system. That is, depending on the presence of uncertainty, one of infinite memory structure and finite memory structure filtered estimates is operated selectively to obtain the valid estimate. A couple of test variables and declaration rule are developed to detect uncertainty presence or uncertainty absence, to operate the suitable one from two kinds of filtered estimates, and to obtain ultimately the valid filtered estimate. Through computer simulations for a continuous time aircraft engine system with different measurement memory lengths and temporary model uncertainties, the proposed state estimation filtering algorithm can work well in temporarily uncertain as well as certain continuous time systems. Moreover, the proposed state estimation filtering algorithm shows remarkable superiority to the infinite memory structure filtering when temporary uncertainties occur in succession.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.155-160
• /
• 1990

This paper presents the new VSMFC (variable structure model following control) algorithm of a system with parameter uncertainty. In contrast to the conventional approach, continuous control inputs am used instead of discontinous ones and modified reachability condition for sliding mode reduces a reaching phase and a newly proposed sliding surfaces are used for the robust control of uncertain system.

• International Journal of Automotive Technology
• /
• 제3권1호
• /
• pp.27-32
• /
• 2002

Semi-active suspension systems are greatly expected to be in the mainstream of future controlled suspensions fur passenger cars. In this study, a continuous variable damper for a passenger car suspension is developed. It is controlled actively and exhibits high performance with light weight, low cost, and low energy consumption. To get fast response of the damper, reverse damping mechanism is adapted, and to get small pressure change rate after blow-off, a pilot controlled proportional valve is designed and analyzed. The reverse continuous variable damper is designed as a HS-SH damper which offers good body control with reduced transferred input force from tire, compared with any other type of suspension system. The damper structure is designed, so that rebound and compression damping force can be tuned independently, of which variable valve is placed externally. The rate of pressure change with respect to the flow rate after blow-offbecomes smooth when the fixed orifice size increases. Damping forces are measured with the change of the solenoid current at the different piston velocities to confirm the maximum hysteresis of 20N, linearity, and variance of damping farce. The damping farce variance is wide and continuous, and is controlled by the spoof opening, of which scheme is usually adapted in proportional valves. The reverse continuous variable damper developed in this study is expected to be utilized in the semi-active suspension systems in passenger cars after its performance and simplicity of the design is confirmed through real car test.

• 한국자동차공학회논문집
• /
• 제10권3호
• /
• pp.192-200
• /
• 2002

Semi-active suspension systems are greatly expected to be in the mainstream of future controlled suspensions for passenger cars. In this study, a continuous variable damper for a passenger car suspension is developed, which is controlled actively and exhibits high performance with light weight, low cost, and low energy consumption. To get fast response of the damper, reverse damping mechanism is adapted, and to get small pressure change rate after blow-off, a pilot controlled proportional valve is designed and analyzed. The reverse continuous variable damper is designed as a HS-SH damper that offers good body control with reduced transferred input force from tire, compared with any other type of suspension system. The damper structure is designed, so that rebound and compression damping force can be tuned independently, of which variable valve is placed externally. The rate of pressure change with respect to the flow rate after blow-off becomes smooth when the fixed orifice size increases, which means that the blow-off slope is controllable using the fixed orifice size. The damping force variance is wide and continuous, and is controlled by the spool opening, of which scheme is usually adapted in proportional valves. The reverse continuous variable damper developed in this study is expected to be utilized in the semi-active suspension systems in passenger cars after its performance and simplicity of the design is confirmed through real car test.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1759-1771
• /
• 2017

In this paper, an improved continuous integral variable structure systems(ICIVSS) with the prescribed control performance is designed for simple regulation controls of uncertain general linear systems. An integral sliding surface with an integral state having a special initial condition is adopted for removing the reaching phase and predetermining the ideal sliding trajectory from a given initial state to the origin in the state space. The ideal sliding dynamics of the integral sliding surface is analytically obtained and the solution of the ideal sliding dynamics can predetermine the ideal sliding trajectory(integral sliding surface) from the given initial state to the origin. Provided that the value of the integral sliding surface is bounded by certain value by means of the continuous input, the norm of the state error to the ideal sliding trajectory is analyzed and obtained in Theorem 1. A corresponding discontinuous control input with the exponential stability is proposed to generate the perfect sliding mode on the every point of the pre-selected sliding surface. For practical applications, the discontinuity of the VSS control input is approximated to be continuous based on the proposed modified fixed boundary layer method. The bounded stability by the continuous input is investigated in Theorem 3. With combining the results of Theorem 1 and Theorem 3, as the prescribed control performance, the pre specification on the error to the ideal sliding trajectory is possible by means of the boundary layer continuous input with the integral sliding surface. The suggested algorithm with the continuous input can provide the effective method to increase the control accuracy within the boundary layer by means of the increase of the $G_1$ gain. Through an illustrative design example and simulation study, the usefulness of the main results is verified.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.463-467
• /
• 1991

A continuous variable structure system control as a DC servomotor trackhig controller is proposed for the improvement of the chattering problems. The stability property of the proposed algorithms is analyzed. The prescribed trackfiig error is gauranteed in the existence of load variations based on the stability analysis.