• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.309-314
• /
• 2006

In general DGPS system, the correction message is transferred to users by wireless modem. To cover wide area, many DGPS station should be needed. And DGPS users must have a wireless modem that is not necessary in standalone GPS. But SBAS users don't need a wireless modem to receive DGPS corrections because SBAS correction message is transmitted from the GEO satellite by L1 frequency band. SBAS signal is generated in the GUS(Geo Uplink Subsystem) and uplink to the GEO satellite. This uplink transmission process causes two problems that are not existed in GPS. The one is a time delay in the uplink signal. The other is an ionospheric problem on uplink signal, code delay and carrier phase advance. These two problems cause ranging error to user. Another critical ranging error factor is clock synchronization. SBAS reference clock must be synchronized with GPS clock for an accurate ranging service. The time delay can be removed by close loop control. We propose uplink ionospheric error correcting algorithm for C/A code and carrier. As a result, the ranging accuracy increased high. To synchronize SBAS reference clock with GPS clock, I reviewed synchronization algorithm. And I modified it because the algorithm didn't consider doppler that caused by satellites' dynamics. SBAS reference clock synchronized with GPS clock in high accuracy by modified algorithm. We think that this paper will contribute to basic research for constructing satellite based DGPS system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.2
• /
• pp.245-249
• /
• 2004

In this paper, we have proposed a clock recovery algorithm of Orthogonal Frequency Division Multiplexing/Quadrature Phase Shift Keying Modulation-Digital Microwave Radio(OFDM/QPSK-DMR) system using Band Limited-Pulse Shaping Filter(BL-PSF) and compared the clock phase error variance of OFDM/QPSK-DMR system with that of single carrier DMR system. The OFDM/QPSK-DMR system using windowing method requires training sequence or Cyclic Prefix (CP) to synchronize the clock phase of received signal. But transmit efficient is increased in our proposed DMR system because of no using redundant data such as training sequence or CP. The proposed clock recovery algorithm is simply realized in the OFDM/QPSK-DMR system using BL-PSF. The simulation results confirm that the proposed clock recovery algorithm has the same clock phase error variance performance in a single carrier DR system under Additive White Gaussian Noise(AWGN) environment.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.160-163
• /
• 1986

In a digital telecommunication network, the clock synchronization is inevitable to prevent the data loss caused by inconsistency of clock frequencies. This paper descries the considerations necessary for synchronization and the implementation of the clock synchronization system using digital processing phase locked loop method in TDX-1 switching system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6B
• /
• pp.305-315
• /
• 2007

In this paper, We generated a wander generation model from really measured clock noise data on the transmission node and DOTS in NG-SDH network. and then, We presented the performance of Synch. clock and maximum node level capable network configuration through the clock characteristics simulation on network having the steady-state clock.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.158-161
• /
• 2013

This letter proposes a low-power current-steering digital-to-analog converter (DAC). The proposed DAC reduces the clock power by cutting the clock signal to the current-source cells in which the data will not be changed. The 10-bit DAC is implemented using a $0.13-{\mu}m$ CMOS process with $V_{DD}$=1.2 V. Its area is $0.21\;mm^2$. It consumes 4.46 mW at a 1-MHz signal frequency and 200-MHz sampling rate. The clock power is reduced to 30.9% and 36.2% of a conventional DAC at 1.25-MHz and 10-MHz signal frequencies, respectively. The measured spurious free dynamic ranges are 72.8 dB and 56.1 dB at 1-MHz and 50-MHz signal frequencies, respectively.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.7
• /
• pp.75-81
• /
• 1993

In this paper, New type of Static Edge Triggered D Flip-Flop Circuits which are effective for the sequencial selecting and addressing of Matrix type Electrodes being applied to Flat Display Devices is proposed by the Design Technique using the Transmission Characteristics of Feedback Transistors and Charge Back Up Function. These Circuits composed of 2-4 less transistors in number than Conventional Static D Flip Flop's have some advantages that the Maximum Transition Time of Clock Signals allowed is increased by 100-450 times more than that of the Conventional circuit at 100KHz Clock Frequence and Circuit Safety is much increased by making the wider ranges, 1-4V, of Clock Levelas a Non-operating periods than 3-3.2V ranges in case of the Conventional Circuit at 10MHz clock frequence. By these advantages, These circuits can be very effectively used in case that clock signal has long transition time, especially on the low frequency operation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1133-1138
• /
• 2007

DLLs(Delay Locked Loops) have widely been used in many systems in order to achieve the clock synchronization. A SMD (Synchronous Mirror Delay) structure is used both for skew reduction and for DCC (Duty Cycle Correction). In this paper, a SMD based DLL with DCC using Reduced Delay Lines is proposed in order to reduce the clock skew and correct the duty cycle. The merged structure allows the forward delay array to be shared between the DLL and the DCC, and yields a 25% saving in the number of the required delay cells. The designed chip was fabricated using a $0.25{\mu}m$ 1-poly, 4-metal CMOS process. Measurement results showed the 3% duty cycle error when the input signal ranges from 80% to 20% and the clock frequency ranges from 400MHz to 600MHz. The locking operation needs 3 clock and duty correction requires only 5 clock cycles as feature with SMD structure.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1009-1012
• /
• 1998

An efficient algorithm for clock skew optimization is proposed in this paper. It construct a new clock routing topology which is the generalized graph model while previous methods uses tree-structured routing topology. Edge-insertion technique is used in order to reduce the clock skew. A link-edge is inserted repeatedly between two sinks whose delay difference is large and the distance is small. As a result, the delay of a sink which has the longer delay is decreased and the clock skew is reduced. The proposed algorithm is implemented in C programming language. From the experimental results, we can get the total wire length minimization under the given skew bound.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.107-110
• /
• 2005

This paper describes the design and fabrication of synchronous clock recovery module for S-DMB Gap Filler. Using the 2.304MHz TTL signal from gap filler tuner, clock recovery module with 10MHz output frequency including holdover function is designed. The measured performance of the clock recovery module shows a stability of less than 0.01ppm, 29 sec stability time, 10 sec holdover time, and maximum -113dBc/Hz@100Hz phase noise.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.2
• /
• pp.167-178
• /
• 2007

We analysis the structure of Song $I-y\u{o}ng's$ Armillary Clock, a Korean National Treasure (No. 230) that is displayed at Korea University Museum. This Armillary Clock is only one remained in east Asia, but does not working because some parts had been broken away. We measured this remains and reconstructed a working model of the astronomical armillary sphere system of the his armillary clock, which system is consisted of Solar and lunar moving devices.