• 한국정보통신학회논문지
• /
• 제25권8호
• /
• pp.1060-1066
• /
• 2021

최근, 양자컴퓨터를 활용하기 위한 연구개발이 다양한 분야에서 활발하게 이루어지고 있다. 양자컴퓨터는 양자 얽힘, 양자중첩과 같은 다양한 양자역학의 현상과 특성을 활용하여 연산을 수행하기 때문에 기존 컴퓨팅 환경에 비해 아주 복잡한 연산과정을 거치게 된다. 이러한 양자컴퓨터를 구동하기 위해서는 연산에 활용되는 양자게이트의 구성뿐만 아니라 큐비트의 종류, 배치, 연결성 등 물리적인 양자컴퓨터의 요소를 반영한 알고리즘이 구성되어야 한다. 따라서 양자컴퓨터 구성요소들의 상호간 영향을 포함한 구성 정보를 직관적으로 파악할 수 있는 회로 시각화가 필요하다. 본 논문에서는 양자컴퓨터를 구성하는 양자칩 정보와 양자컴퓨팅 회로 데이터를 3D로 시각화하여 직관적으로 데이터를 관측하고 활용할 수 있도록 시각화 하여 직관적인 정보를 분석할 수 있는 방법을 제안한다.

• 한국가시화정보학회지
• /
• 제14권2호
• /
• pp.52-60
• /
• 2016

The Passive Auxiliary Feedwater System(PAFS) is one of the advanced safety concepts adopted in the Advanced Power Reactor Plus(APR+). To validate the operational performance of the PAFS, detailed understanding of a boiling heat transfer on horizontal tube outside is of great importance. Especially, in the mechanistic boiling heat transfer model, it is important to visualize the phenomena but there are some limitations with conventional experimental approaches. In the present study, we devised a heater based on the Flexible Printed Circuit Board (FPCB) for a more comprehensive visualization and subsequently, a digital image processing technique for the bubble motion measurement was established. Using the measurement technique, important parameters of the nucleate boiling are analyzed.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.48-51
• /
• 2004

Chemical Mechanical Polishing(CMP) is popularly used in production of semiconductor because of large area polishing ability probability of improvement for more integrated circuit. However, present CMP processing causes some non-uniformity errors which can be critical for highly integrated circuit. Previous studies predict that flow-field of slurry during CMP can create non-uniformity, but no quantitative measurement has conducted. In this study, using PIV, slurry velocity flow-field during CMP is measured by changing the ratio of RPM of pad and carrier with tuned PIV system adequate for small room in CMP machine and Cabot's non-groove pad Epad-A100. The result show that velocity of slurry is majorly determined by pad-rpm and the ratio of between carrier and pad rpm make some changes in streamlines.

• 한국가시화정보학회지
• /
• 제7권2호
• /
• pp.17-21
• /
• 2010

This paper presents the fabrication and performance measurement of a temperature sensor array on a flexible substrate attachable to a curved surface using MEMS technology. Specifically, the fabrication uses the well-developed printed circuit board fabrication technology for complex electrode definition. The temperature sensor array are lifted off with a $10{\times}10$ matrix in a $50\;mm{\times}50\;mm$ to visualize temperature distribution. Copper is used as temperature sensing material to measure the change in resistances with temperature increase. In a thermal oven with temperature control, the temperature sensor array is Characterized. The constant slope of resistance change is obtained and temperature distribution is measured from the relationship between resistance and temperature.

• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.145-152
• /
• 2006

This paper presents a windows application for voltage sag analysis and effective data visualization. The developed Voltage Sag Analysis Tool (VSAT) was designed by using the Object-Oriented Programming (OOP) concept and C++ programming language. The VSAT provides basic functions for voltage sag analysis such as power flow analysis, short circuit analysis and stochastic analysis. In particular, the VSAT provides effective data visualization through computer graphics and animation. Analysis results are expressed realistically and intuitively on geographical display. The Graphic User Interface (GUI) of VSAT was designed specifically for voltage sag analysis. In this paper, the development and implementation of VSAT is presented. In order to demonstrate the capabilities of VSAT, it is used to analyze the Jeju Island power system in South Korea.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권7호
• /
• pp.297-305
• /
• 2006

This paper summarizes a development of visualization software for protective engineering in low-voltage power systems. The study is concentrated on the following aspects. First, a software engineering method is applied for designing the object-oriented program. The design and implementation of a Graphic User Interface(GUI) and its integration to a power system framework are developed using object-oriented programming(OOP) in Visual C++. Second, we develop the short circuit analysis module that oriented a low-voltage power system. It is possible to calculate a peak, symmetrical RMS, DC component and asymmetrical fault currents for each time. And it is the first software that can calculate the fault current for single branch of three-phase system. The calculation accuracy is compared with commercial software, and the libraries of low-voltage components are served for convenience use. Third, protective engineering functions are equipped. It is possible to automatically select the circuit breaker which based on the user input characteristics and the fault current calculation and examine the protective coordination. Through the case study, we verified that the developed software can be effectively used to examine the protective engineering in low-voltage power systems.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.69-76
• /
• 2021

Printed circuit heat exchanger (PCHE) is a compact heat exchanger with good heat transfer performance, high structure integrity, and reliability over a wide range of temperatures and pressures. Instead of the traditional zigzag and straight shape channel, the sinusoidal shape channel was adopted in this study to investigate the relation of thermal-hydraulic performance and waviness factors (period and amplitude). The local flow characteristics and the heat flux distribution were compared to verify the effects of period and amplitude on heat transfer performance. As the period of channel becomes shorter, the rapid change of the flow direction can produce high flow separation around the corner leading to the disturbance of the boundary layer opposite wall. The nonuniform distribution of flow velocity appeared around the corner positions can promote fluid mixing and lead to higher thermal performance. An evaluation index was used to compare the comprehensive performance of PCHE considering the Nusselt number and Fanning factor. Based on the simulation results, the optimal design parameters of PCHE channel shape were found that the channel with an equivalent bending angle of 15° offers the highest heat flux capacity.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.611-613
• /
• 2021

최근, 고전컴퓨터(Classic Computer)의 한계를 뛰어넘는 양자컴퓨터(Quantum Computer)에 대한 연구개발이 다양한 분야에서 활발하게 이루어지고 있다. 고전컴퓨터의 전기적인 신호처리와는 다르게 양자역학적인 원리를 사용한 양자컴퓨터는 양자 중첩(Quantum Superposition), 양자 얽힘(Quantum Entanglement)과 같은 다양한 양자역학의 현상/특성을 활용하여 연산을 수행하기 때문에 고전컴퓨터의 연산에 비해 아주 복잡한 연산과정을 거치게 된다. 또한, 큐비트의 종류, 배치, 연결성 등 실제 양자컴퓨터를 구동시키기 위해 구성되는 많은 요소들에 의한 각각의 영향이 양자컴퓨터의 연산 결과와 연산 과정에서 많은 영향을 끼치기 때문에 각각의 요소를 효율적이고 정확하게 활용하기 위해 실제 양자컴퓨터의 구동 이전에 데이터를 시각화하여 오류검증/최적화/신뢰성검증을 할 필요가 있다. 하지만 양자컴퓨터 내부에 구성된 다양한 요소들의 데이터를 전부 시각화 할 경우 직관적으로 원하는 데이터를 파악하는 것이 어렵기 때문에 선별적으로 데이터를 시각화 할 필요가 있다. 본 논문에서는 양자컴퓨터를 구성하는 다양한 요소들의 데이터를 시각화 하여 직관적으로 데이터를 관측하고 활용할 수 있도록 복잡하게 구성되는 양자컴퓨터 내부 회로 구성요소들을 계층적으로 시각화 하는 방법을 제안한다.

• 한국정밀공학회지
• /
• 제30권11호
• /
• pp.1211-1216
• /
• 2013

In this study, a dynamic camera actuation system for simultaneous in situ image acquisition is developed to achieve real-time observation of transient liquid flow on a lab-on-a-disk. A disk-type electric circuit, namely circuit-on-a-disk, co-rotated with the lab-on-a-disk improves the dynamic image acquisition ability in terms of a frame rate. The circuit-on-a-disk is comprised of a camera connected with a motor, a microprocessor and a wireless communication module. The camera connected with the motor enables to realize dynamic tracking of a transient flow and real-time image acquisition. The obtained images can be simultaneously transferred by a video/audio transmitter unit to a personal computer. Also, the microprocessor receives signals from the personal computer, and then controls the focusing position of the camera. We are expecting that heaters, sensors, and light sources also can be integrated on the circuit-on-a-disk, and they will enable various functional actuations as well as precise image acquisition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권3호
• /
• pp.107-118
• /
• 1986

The presenet research attempts to examine the combustion characteristics and the structure of the flame in turbulent premixed flames and thus enhance the combustion performance that leads to the design of the effective combustion system (untilizing LNG). Following experimental investigations for several stabilized premixed flames were attempted to identify the interactive mechanism between flame structures and flow fields; Visualization by Schlieren method, measurement of flow velocity by LDV, detection of ion current by ion probe, measurement of fluctuating temperature by thermocouple having compensation circuit, average values with respect to time of fluctuating amount for flow velocity, temperature, ion current, etc., variable RMS values, PDFs, autocorrelation, crosscorrelation, spatial macroscale, power spectra, and velocity scale. Continuing the authors published studies whose flame dominated by coherent structures and the characteristics of combustion reaction for irregular three dimensional flame and stabilized flame by step were investigated with obtained experimental quantities. Results of this research are following : The most turbulent flames support the structure of a Wrinkled laminar flame or laminar flamelets. It also observed that combustion reaction is related to small tubulence microscales of the turbulent flow fields closly.