• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.1967-1971
• /
• 2013

Aim of our study is finding adsorbents suitable for pre-concentration of chemical warfare agents (CWAs). We considered Tenax, bare silica and polydimethylsiloxane (PDMS)-coated silica as adsorbents for dimethyl methylphosphonate (DMMP) and dipropylene glycol methyl ether (DPGME). Tenax showed lower thermal stability, and therefore, desorption of CWA simulants and decomposition of Tenax took place simultaneously. Silica-based adsorbents showed higher thermal stabilities than Tenax. A drawback of silica was that adsorption of CWA simulant (DMMP) was significantly reduced by pre-treatment of the adsorbents with humid air. In the case of PDMS-coated silica, influence of humidity for CWA simulant adsorption was less pronounced due to the hydrophobic nature of PDMS-coating. We propose that PDMS-coated silica can be of potential importance as adsorbent of CWAs for their pre-concentration, which can facilitate detection of these CWAs.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.210-217
• /
• 2022

Chemical warfare agents(CWA) such as nerve agents and vesicating agents show lethality by skin contamination. Skin protection, therefore, is one of the top priorities to deal with the growing threat from CWA. In an attempt to develop the most effective topical skin protectant(TSP), candidate substances including PFPE(perfluorinated polyether), PTFE(polytetrafluoroethylene), glycerin, and polysaccharides were evaluated in forms of various formulations against nerve agent simulant DMMP(dimethylmethyl phosphonate) penetration. The protective efficacy of the formulation against DMMP penetration was estimated as the onset time of color change of the KM9 chemical agent detection paper. Based on this study, it was found that several PFPE- and glycerin-based formulations exhibit remarkably superior efficacy as a protective cream. This protective cream is expected to be used as TSP for military application after further research.

• 한국군사과학기술학회지
• /
• 제25권4호
• /
• pp.434-442
• /
• 2022

Highly toxic chemical warfare agents(CWA) could be used in chemical warfare and terrorism. The protection of skin is crucial for civilians and soldiers, because the primary routes of exposure to CWA are inhalation and skin absorption. Thus, topical skin protectants(TSP) have been studied and developed in many countries to complement protective equipments. In this study, in-vitro test procedure was optimized and established using a flow-through diffusion cell system containing excised hairless mouse skin in an attempt to assess the effectiveness of various TSP formulations against nerve agent simulants. In addition, the test results on the formulations including the ingredients used in SERPACWA(Skin Exposure Reduction Paste Against Chemical Warfare Agent) and IB-1(TSP of Israel) were included, indicating that the formulations with perfluorinated compounds were more effective than the glycerin-based formulations.

• 센서학회지
• /
• 제28권3호
• /
• pp.139-145
• /
• 2019

Precautionary detection of chemical warfare agents (CWAs) has been an important global issue mainly owing to their toxicity. To achieve proper detection, many studies have been conducted to develop sensitive gas sensors for CWAs. In particular, metal-oxide semi-conductors (MOS) have been investigated as promising sensing materials owing to their abundance in nature and excellent sensitivity. In this review, we mainly focus on various MOS-based gas sensors that have been fabricated for the detection of two specific CWA simulants, 2-chloroethyl ethyl sulfide (2-CEES) and dimethyl methyl phosphonate (DMMP), which are simulants of sulfur mustard and sarin, respectively. In the case of 2-CEES, we mainly discuss $CdSnO_3-$ and ZnO-based sensors and their reaction mechanisms. In addition, a method to improve the selectivity of ZnO-based sensors is mentioned. Various sensors and their sensing mechanisms have been introduced for the detection of DMMP. As the reaction with DMMP may directly affect the sensing properties of MOS, this paper includes previous studies on its poisoning effect. Finally, promising sensing materials for both gases are proposed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.148.2-148.2
• /
• 2013

We prepared hydrophobic PDMS-coated porous silica as pre-concentration adsorbent for chemical warfare agents (CWAs). Since CWAs can be harmful to human even with a small amount, detecting low-concentration CWAs has been attracting attention in defense development. Porous silica is one of the promising candidates for CWAs pre-concentration adsorbent since it is thermally stable and its surface area is sufficiently high. A drawback of silica is that adsorption of CWAs can be significantly reduced due to competitive adsorption with water molecule in air since silica is quite hydrophilic. In order to solve this problem, hydrophobic polydimethylsiloxane (PDMS) thin film was deposited on silica. Adsorption and desorption of chemical warfare agent (CWA) simulants (Dimethylmethylphosphonate, DMMP and Dipropylene Glycol Methyl Ether, DPGEM) on bare and PDMS-coated silica were studied using temperature programed desorption (TPD) with and without co-exposing of water vapor. Without exposure of water vapor, desorbed amount of DMMP from PDMS-coated silica was twice larger than that from bare silica. When the samples were exposed to DMMP and water vapor at the same time, no DMMP was desorbed from bare silica due to competitive adsorption with water. On the other hand, desorbed DMMP was detected from PDMS-coated silica with reduced amount compared to that from the sample without water vapor exposure. Adsorption and desorption of DPGME with and without water vapor exposing was also investigated. In case of bare silica, all the adsorbed DPGME was decomposed during the heating process whereas molecular DPGME was observed on PDMS-coated silica. In summary, we showed that hydrophobic PDMS-coating can enhance the adsorption selectivity toward DMMP under humid condition and PDMS-coating also can have positive effect on molecular desorption of DPGME. Therefore we propose PDMS-coated silica could be an adequate adsorbent for CWAs pre-concentration under practical condition.

• 한국군사과학기술학회지
• /
• 제7권2호
• /
• pp.81-87
• /
• 2004

Semiconductor thick film gas sensors based on tin oxide are fabricated and their gas response characteristics are examined for four simulant gases of chemical warfare agent (CWA)s. The sensing materials are prepared in three different sets. 1) The Pt or Pd $(1,\;2,\;3\;wt.\%)$ as catalyst is impregnated in the base material of $SnO_2$ by impregnation method.2) $Al_2O_3\;(0,\;4,\;12,\;20\;wt.\%),\;In_2O_3\;(1,\;2,\;3\;wt.\%),\;WO_3\;(1,\;2,\;3\;wt.\%),\;TiO_2\;(3,\;5,\;10\;wt.\%)$ or $SiO_2\;(3,\;5,\;10\;wt.\%)$ is added to $SnO_2$ by physical ball milling process. 3) ZnO $(1,\;2,\;3,\;4,\;5\;wt.\%)$ or $ZrO_2\;(1,\;3,\;5\;wt.\%)$ is added to $SnO_2$ by co-precipitation method. Surface morphology, particle size, and specific surface area of fabricated sensing films are performed by the SEM, XRD and BET respectively. Response characteristics are examined for simulant gases with temperature in the range 200 to $400^{\circ}C$, with different gas concentrations. These sensors have high sensitivities more than $50\%$ at 500ppb concentration for test gases and also have shown good repetition tests. Four sensing materials are selected with good sensitivity and stability and are fabricated as a sensor array A sensor array Identities among the four simulant gases through the principal component analysis (PCA). High sensitivity is acquired by using the semiconductor thick film gas sensors and four CWA gases are classified by using a sensor array through PCA.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제26권1호
• /
• pp.54-64
• /
• 2021

The chemical warfare agents (CWAs) have been developed for offensive or defensive purposes and used as chemical weapons in war and terrorism. The CWAs are exposed to the natural environment, transported through the water system and then eventually contaminate soil and groundwater. Therefore, effective decontamination technology to remediate CWAs are needed. The CWAs are extremely dangerous and prodution is strictly prohibited, therefore, it is difficult to use CWAs even in experimental purpose. In this study, 2,4-dichlorophenoxyacetic acid (2,4-D) was chosen as a model representative CWA because it is a simulant of anti-plant CWAs and one of the major component of agent orange. The optimum degradation conditions such as oxidant:activator ratio were determined. The effects of hydroxylamine and chelating agents such as citric acid (CA), oxalic acid (OA), malic acid (MA), and EDTA addition to increase Fe2+ activation were also investigated. Scavenger experiments using tert-butyl alcohol (TBA) and ethanol confirmed that although both sulfate (SO4•-) and hydroxyl radical (•OH) existed in Fe2+-persulfate system, sulfate radical was the predominant radical. To promote the Fe2+ activator effect, the effect of hydroxylamine as a reducing agent was investigated. In chelating agents assisted Fe2+-persulfate oxidation, the addition of 2 mM of CA and MA enhanced 2,4-D degradation. In contrast, EDTA and OA inhibited the 2,4-D removal due to steric hindrance effect.

• 공업화학
• /
• 제30권5호
• /
• pp.513-522
• /
• 2019

유기물질, 전이금속 및 유기-금속 구조체(MOFs)를 기반으로 하는 촉매들이 유기인 계열 독성물질들을 분해하고 제거하는데 효과적임이 보고되어 왔다. 최근 20년간 독성물질 분해연구를 위해 다공성 MOFs들이 응용 목적에 맞게 디자인되고 합성되었다. $Zr_6$ 기반의 금속노드와 유기결합체를 가지는 MOFs들은 세공크기, 공극률, 표면적, Lewis acidic 자리 그리고 열적 안정성 등과 같은 기본구조내의 변형이 가능하기 때문에 화학작용제, 살충제 및 제초제를 제거하는 촉매로 널리 사용되어왔다. 본 리뷰에서는 구조, 안정성, 입자크기, 연결된 리간드 수, 유기 기능기 등에 따른 MOFs들의 촉매효율과의 연관성을 다루게 될 것이다.

• 공업화학
• /
• 제31권2호
• /
• pp.125-137
• /
• 2020

최근 몇 년간 유기인 계열 독성물질이 민간인을 대상으로 사용되어 전 세계적으로 큰 위협이 되고 있다. 독성물질에 대한 예방이 불가능한 현 치료대책 대신, 보다 개선된 치료 대책으로서의 바이오스캐빈저에 대한 연구가 활발히 진행됐다. 바이오스캐빈저는 유기인 계열 독성물질이 인체 내 표적 기관에 도달하기 전, 독성물질 자체를 비활성 상태로 전환하거나 독성물질과 기질 간의 결합을 차단함으로써 중독을 예방하는 단백질 및 효소를 일컫는다. 특히 독성물질을 분해하는 과정에서 활성 상태를 유지함으로써 적은 양의 단백질로도 독성물질의 중독을 빠르게 치료하는 촉매성 바이오스캐빈저 개발에 많은 노력이 투여되어 왔다. 본 리뷰에서는 촉매성 바이오스캐빈저 개발을 위해 분자진화 및 단백질 공학 기술을 적용한 최신 연구들에 대해 소개하고, 끝으로 이러한 효소들을 임상적으로 승인된 약으로 개발하기 위해 남은 몇 가지 과제들을 간단히 제시할 것이다.