• 전자공학회논문지
• /
• 제54권2호
• /
• pp.133-138
• /
• 2017

본 논문은 RC 시정수 회로를 이용하여 지터 특성을 개선한 위상고정루프의 구조를 제안하였다. RC 시정수 회로에서는 루프 필터 전압이 작은 시정수와 큰 시정수 값을 가지는 회로를 통과하여 비교기로 전달된다. 작은 시정수 값을 가지는 회로를 지나는 신호는 거의 루프 필터 출력 전압과 같은 값을 가진다. 큰 시정수 값을 가지는 회로를 지나는 신호는 루프 필터 출력전압의 평균값을 가지며, 비교기회로에서 기준 신호 역할을 한다. 비교기의 출력 신호는 루프 필터에 전류를 공급하는 보조 전하펌프를 제어한다. 루프 필터 출력 전압이 상승하면 보조 전하펌프는 루프 필터에서 전류를 방전시켜 루프 필터 출력 전압이 하강하게 하고, 또는 루프 필터 출력 전압이 하강하면 보조 전하펌프는 루프 필터에서 전류를 충전시켜 루프 필터 출력 전압이 상승하게 한다. 이런 부궤환 루프는 필터 출력 전압 변동 폭을 줄여서 지터 크기를 감소시켜준다.

• 한국안전학회지
• /
• 제5권1호
• /
• pp.57-66
• /
• 1990

The purpose of this study is to investigate electrostatic charge condition and possibility of electrostatic hazards in case of putting on synthetic smocks and antistatic garments for the purpose of prevention of electrostatic hazards due to a human body electrical charge. It is shown in case of a synthetic smocks, electrostatic voltage by friction is about 2,900 (V), half life period is 12 second, and electrostatic charge is 1.4―1.8 ($\mu$ C). When putting on a synthetic smocks, electrostatic voltage is 2,500―2,800(V). When putting on a jumper of chemical fiber, electrostatic voltage is 8,000(V) . It is, therfore, possible to cause a electrostatic hazards. It is also shown in case of a antistatic garments, electrostatic voltage by friction is 87(V) ―280(V) (washing 90 times), half life period is 3―5 second, and electrostatic charge is 0.24―0.28($\mu$ C) which is much lower than 0.6($\mu$ C) limitation of fire and explosion occurance. When putting on a antistatic garments, electrostatic voltage is 10(V) ―125(V). In conclusion, it is shown when putting on a antistatic garments it is possible to prevent a electrostatic hazards such as fire or explosion due to human body, to prevent a destruction of semiconductor elements and capacity decline, and to prevent a misoperation of automation facilities and semiconductor electric and electronic products.

• 조명전기설비학회논문지
• /
• 제25권8호
• /
• pp.39-47
• /
• 2011

The motion of a conductive spherical particle under uniform electric field is investigated in order to find a suitable method for removing the conducting solid impurities contained in liquid plastic. When the positive dc voltage applied to the upper electrode, the vertical up-and-down motion of a charged particle by electrostatic force is observed by a charge-coupled device (CCD) camera or a high-speed video camera. The experimental data of the static threshold voltage by which the particle starts to move toward the counter electrode in air or silicone oil are in good agreement with theoretical value. When the applied voltage is larger than the static threshold voltage, the particle motion pattern in silicone oil consists of four stages: upward motion, stopping at the upper electrode, downward motion and stopping at the lower electrode. The stopping motion on the electrode is thought to be caused by the liquid flow accompanied by the particle motion. The particle charge calculated by integrating the pulse current, which is generated by the charge exchange between the electrode and the particle, is approximately 0.1~0.25 times of the theoretical value. This study is expected to help understand the electric properties of microparticles in oil circuit breaker (OCB) and oil transformer and improve their performance and longevity.

• 반도체디스플레이기술학회지
• /
• 제22권4호
• /
• pp.161-165
• /
• 2023

This paper designed a voltage feedback driving circuit to compensate for the characteristic deviation of the Active Matrix Organic Light Emitting Diode driving Thin Film Transistor. This paper describes a stable and fast circuit by applying charge sharing and polar stabilization methods. A 12-inch Organic Light Emitting Diode with a Double Wide Ultra eXtended Graphics Array resolution creates a screen distortion problem for line parasitism, and charge sharing and polar stabilization structures were applied to solve the problem. By applying Charge Sharing, all data lines are shorted at the same time and quickly positioned as the average voltage to advance the compensated change time of the gate voltage in the next operation period. A buffer circuit and a current pass circuit were added to lower the Amplifier resistance connected to the line as a polar stabilization method. The advantage of suppressing the Ringing of the driving Thin Film Transistor can be obtained by increasing the stability. As a result, a circuit was designed to supply a stable current to the Organic Light Emitting Diode even if the characteristic deviation of the driving Thin Film Transistor occurs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.893-898
• /
• 2003

An experiment was conducted to characterize water droplet charging performance of an electrostatic spraying nozzle for an electrostatic wet scrubber. Charge-to-mass ratios, the nozzle currents divided by the mass flow rate of water were obtained with respect to the applied voltage to the ring-electrode for 2 different flow conditions. It was shown that the charge-to-mass ratio increased in proportion to the applied voltage and tended to saturate at a certain higher voltage.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권6호
• /
• pp.664-670
• /
• 2015

A four-times-VDD switch that supports high and low voltage mode operations is demonstrated in a generic 65 nm logic process. The proposed switch shows the robust operation for supply voltages ranging from VDD to $4{\times}VDD$. A cascaded voltage switch and a voltage doubler based charge pump generate the intermediate supply voltage levels required for the proposed high voltage switch. All the high voltage circuits developed in this work can be implemented using standard logic transistors without being subject to any voltage overstress.

• 전자공학회논문지
• /
• 제52권5호
• /
• pp.58-65
• /
• 2015

본 논문에서는 신경 관련 인공 전자기기를 위한 신경 자극 집적회로를 $0.18-{\mu}m$ 표준 CMOS 반도체 공정을 이용하여 설계하였다. 제안 된 신경 자극 회로는 12.8-V 전원을 사용하면서 $10-k{\Omega}$의 부하에 최대 1 mA의 전류까지 전달이 가능하다. 표준 CMOS 공정 기술로 구현을 위해서 저전압 트랜지스터만을 이용하여 설계를 하였고, 고전압에서의 안정적인 동작을 위하여 트랜지스터 스태킹 기술을 적용하였다. 또한, 신경 자극 동작 후 전하 잔여량이 남아 있지 않도록 active charge balancing회로를 포함하였다. 제안 된 단일 채널 자극 집적회로의 경우 디지털-아날로그 변환기, 전류 출력 드라이버, 레벨 시프터, 디지털 제어 부분, 그리고 active charge balancing 회로까지 모두 포함하여 전체 칩 레이아웃 면적은 $0.13mm^2$을 차지하며, 다중 채널 방식의 신경 자극 기능의 체내 이식용 인공 전자기기 시스템에 적용을 하는데 적합하다.

• Journal of Power Electronics
• /
• 제9권3호
• /
• pp.472-480
• /
• 2009

In this paper, a charge equalization converter with parallel-connected primary windings of transformers is proposed. The proposed work effectively balances the voltage among Lithium-Ion battery cells despite each battery cell has low voltage gap compared with its state of charge (SOC). The principle of the proposed work is that the equalizing energy from all battery strings moves to the lowest voltage battery through the isolated dc/dc converter controlled by the corresponding solid state relay switch. For this research a prototype of four Lithium-Ion battery cells is optimally designed and implemented, and experimental results show that the proposed method has excellent cell balancing performance.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.575-576
• /
• 2008

This paper presents a design of a charge pumping circuit for LCD Driver IC. The charge pumping circuit consists of a control block, a VCIOUT generating block, a DDVDH generating block, a VGH/VGL generating block, and VCL generating block. It generates various higher and lower voltage than supply voltage using external control input. Simulation results show that voltages of DDVDH, VGH, VGL, and VCL satisfy the target voltage, and the output DDVDH drives the output current 7mA.

• 대한전자공학회논문지
• /
• 제27권7호
• /
• pp.1033-1041
• /
• 1990

In this paper, under pinch-off conditions, the gate-drain breakdown voltage characteristics of GaAs Power MESFET's as a function of device parameters such as channel thickness, doping concentration, gate length etc. are analyzed. Using the Green's function, the gate ionic charge induced by the depleted channel ionic charge is calculated. The impact ionization integral by avalanche multiplication between gate and drain is used to investigate breakdown phenomena. Especially, the localized excess surface charge effect as well as the uniform surface charge effect on breakdown voltage is considered.