• Proceedings of the IEEK Conference
• /
• 2000.07b
• /
• pp.957-960
• /
• 2000

A novel extraction method of high frequency small-signal model parameters for MOSFETS is proposed. From S-parameter measurement, this technique accurately extracts the model parameters including the charge conservation capacitance parameters. To consider charge conservation, nonreciprocal capacitance is considered. The modeled parameters fit the measurements very well without any optimization.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.2
• /
• pp.9-15
• /
• 2004

We present a new unified analytical front surface potential model, which can accurately describe the transitions between the partially-depleted (PD) and the fully-depleted (FD) regimes with an analytical expression for the critical voltage V$_{c}$ delineating the PD and the FD region. It is valid in all regions of operation (from the sub -threshold to the strong inversion) and has the shorter calculation time than the iterative procedure approach. A charge sheet model based on the above explicit surface potential formulation is used to derive a single formula for the drain current valid in all regions of operation. Most of the secondary effects can be easily included in the charge sheet model and the model accurately reproduces various numerical and experimental results. No discontinuity in the derivative of the surface potential is found even though three types of smoothing functions are used. More importantly, the newly introduced parameters used in the smoothing functions do not strongly depend on the process parameter.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.77-80
• /
• 2000

This paper describes a new method to decide the margin for the sustain voltage of AC PDPs based on the wall-charge distribution. We model the discharge cell and measure the wall-charge when sustain pulses are applied to the AC PDP. The measured wall-charge distribution informs us of the voltage forming the maximum wall-charge which should be chosen as the sustain voltage.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.433-437
• /
• 1998

Equalize SOC of the cell which effect on the charge.discharge ability and the efficiency of the battery, through the charge.discharge characteristic test of the battery source, and develope the high efficiency charge.discharge system in the series HEV have a constant engine-generator output. For this, in this paper, establish the electrical model and the condition of high efficiency charge.discharge, and proposed the improvement method of charge.discharge characteristic in the battery source that consist of twenty Ni-MH cells connected serial/parallel

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.9
• /
• pp.1378-1385
• /
• 1990

In this paper we propose a model which can predict well the logical errors come from the charge redistribution in domino gates. In this model the effect of the intrinsic capacitance between gate and channel of MOSFET's is considered. This effect is more important than the parasitic capacitance effect. The error by the proposed model is only 8% of that by the currently used model. This model can be used as a guide-line in the design of domino circuits.

• The Journal of Information Systems
• /
• v.13 no.1
• /
• pp.97-119
• /
• 2004

Recently, many e-business companies started to charge fees to the use of information contents service. However, little is known about how users evaluate and determine to purchase information services. Past technology adoption research has focused primarily on the positive utility gains side, focusing on usefulness and ease of use. Purchase of e-service, however, involves not only the position utilities but also negative utilities. This research uses the service value model(SVM) and explains user's intention of purchasing a new information service. Based on the Perceived Value Framework, this research investigates the impacts of the service quality and the fee charge on the user's perceived service value and further on user's intention of adopting the e-service. One of the most important postulations of this research is that both service quality and the fee charge influence user's intention through affecting the user's perceived service value. This research presences a conceptual model of users' e-service evaluation process. The conceptual framework provides a basis for understanding how perceptions of quality and sacrifice influence value perceptions and purchase intentions. The results of an empirical research suggest that the both service quality and fee charge have influences on the perceived service value. However, they do not directly affect user's intention to purchase the e-service. They affect user's intention to purchase through affecting the perceived service value. In conclusion, this research provides a base to build on for other research studying use intention model of new e-service.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.82.2-82.2
• /
• 2011

A channel design which is closely related with the mass transport overpotential is one of the most important procedures to optimize the whole fuel cell performance. In this study, three dimensional results of a numerical study for gas distribution in channels of a molten carbonate fuel cell (MCFC) unit cell for a 1kW class stack was presented. The relationship between the fuel and air distribution in the anode and cathode channels of the unit cell and the electric performance was observed. A charge balance model in the electrodes and the electrolyte coupled with a heat transfer model and a fluid flow model in the porous electrodes and the channels was solved for the mass, momentum, energy, species and charge conservation. The electronic and ionic charge balance in the anode and cathode current feeders, the electrolyte and GDEs were solved for using Ohm's law, while Butler-Volmer charge transfer kinetics described the charge transfer current density. The material transport was described by the diffusion and convection equations and Navier-Stokes equations govern the flow in the open channel. It was assumed that heat is produced by the electrochemical reactions and joule heating due to the electrical currents.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.1604-1612
• /
• 2011

We developed three-dimensional quantitative structure activity relationship (3D-QASR) models for 17 adamantyl derivatives as P-glycoprotein (P-gp) inhibitors. Eighteen different partial charge calculation methods were tested to check the feasibility of the 3D-QSAR models. Best predictive comparative molecular field analysis (CoMFA) model was obtained with the Austin Model 1-Bond Charge Correction (AM1-BCC) atomic charge. The 3D-QSAR models were derived with CoMFA and comparative molecular similarity indices analysis (CoMSIA). The final CoMFA model ($q^2$ = 0.764, $r^2$ = 0.988) was calculated with an AM1-BCC charge and electrostatic parameter, whereas the CoMSIA model ($q^2$ = 0.655, $r^2$ = 0.964) was derived with an AM1-BCC charge and combined steric, electrostatic, hydrophobic and HB-acceptor parameters. Leave-five-out (LFO) cross-validation was also performed, which yielded good correlation coefficient for both CoMFA (0.801) and CoMSIA (0.656) models. Robustness of the developed models was checked further with 1000 run bootstrapping analyses, which gave an acceptable correlation coefficient for CoMFA (BS-$r^2$ = 0.997, BS-SD = 0.003) and CoMSIA (BS-$r^2$ = 0.996, BS-SD = 0.018).

• Proceedings of the KIEE Conference
• /
• 1994.11a
• /
• pp.290-292
• /
• 1994

This paper presents a methodology for the electric field analysis of substation. For the electric field analysis of substation, the electrodes(substation busbars) must be represented by finite line with nonlinear charge density. In the case of dividing finite line into uniform segments, a large number of variables have to be used to obtain the accuracy within a desired tolerance. To deal with the problem, nonuniform charge arrangement modeling method is suggested. To reduce potential calculation errors, the linear charge density function is considered particularly for the segment charge model ling. If the charge arrangement is improper, the accuracy not improved regardless of increment in the number of segments. This paper proposes an optimal charge arrangement method through potential error analysis. And, the optimal charge arrangement function is formulated by a lot of simulation results.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.12
• /
• pp.31-38
• /
• 1997

A new CAD-compatible non-quasi-static (NQS) MOS transient model is presented. A new type of weighted residual method, the collcoatin method, is adopted to obtian an approximate ordinary differntial equation from the continuity eqation. Contrasting to the conventional NQS models, the new model can directly include the variatin of the depletion charge and the derived transient current sare expressed with only physically meaningful variables. The new model predicts transient behaviors reasonably well in the calculation including cutoff regions where the depletion charge rapidly changes.