• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.4
• /
• pp.789-794
• /
• 2017

Subthreshold current model is presented using analytical potential distribution of junctionless cylindrical surrounding-gate (CSG) MOSFET and threshold voltage shift is analyzed by this model. Junctionless CSG MOSFET is significantly outstanding for controllability of gate to carrier flow due to channel surrounded by gate. Poisson's equation is solved using parabolic potential distribution, and subthreshold current model is suggested by center potential distribution derived. Threshold voltage is defined as gate voltage corresponding to subthreshold current of $0.1{\mu}A$, and compared with result of two dimensional simulation. Since results between this model and 2D simulation are good agreement, threshold voltage shift is investigated for channel dimension and doping concentration of junctionless CSG MOSFET. As a result, threshold voltage shift increases for large channel radius and oxide thickness. It is resultingly shown that threshold voltage increases for the large difference of doping concentrations between source/drain and channel.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.6
• /
• pp.847-853
• /
• 2016

Applications of Si have been increasingly exploited and extended to More-Moore, More-than-Moore, and beyond-CMOS approaches. Ge is regarded as one of the supplements for Si owing to its higher carrier mobilities and peculiar band structure, facilitating both advanced and optical applications. As an emerging metal-oxide device, the junctionless field-effect transistor (JLFET) has drawn considerable attention because of its simple process, less performance fluctuation, and stronger immunity against short-channel effects due to the absence of anisotype junctions. In this study, we investigated lateral field scalability, which is equivalent to channel-length scaling, in Si and Ge JLFETs. Through this, we can determine the usability of Si CMOS and hypothesize its replacement by Ge. For simulations with high accuracy, we performed rigorous modeling for ${\mu}_n$ and ${\mu}_p$ of Ge, which has seldom been reported. Although Ge has much higher ${\mu}_n$ and ${\mu}_p$ than Si, its saturation velocity ($v_{sat}$) is a more determining factor for maximum $I_{on}$. Thus, there is still room for pushing More-Moore technology because Si and Ge have a slight difference in $v_{sat}$. We compared both p- and n-type JLFETs in terms of $I_{on}$, $I_{off}$, $I_{on}/I_{off}$, and swing with the same channel doping and channel length/thickness. $I_{on}/I_{off}$ is inherently low for Ge but is invariant with $V_{DS}$. It is estimated that More-Moore approach can be further driven if Si is mounted on a JLFET until Ge has a strong possibility to replace Si for both p- and n-type devices for ultra-low-power applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.982-988
• /
• 2012

This paper has presented the relation of scaling theory and threshold voltage of double gate(DG) MOSFET. In the case of conventional MOSFET, current and switching frequency have been analyzed based on scaling theory. To observe the possibility of application of scaling theory for threshold voltage of DGMOSFET, the change of threshold voltage has been observed and analyzed according to scaling theory. The analytical potential distribution of Poisson equation has been used, and this model has been already verified. To solve Poisson equation, charge distribution such as Gaussian function has been used. As a result, it has been observed that threshold voltage is grealty changed according to scaling factor and change rate of threshold voltages is traced for scaling of doping concentration in channel. This paper has explained for the best modified scaling theory reflected the influence of two gates as using weighting factor when scaling theory has been applied for channel length and channel thickness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.865-868
• /
• 2006

In this paper, the subthreshold swing has been analyzed for double gate FinFET under channel length of 20nm. The analytical current model has been developed, including thermionic current and tunneling current models. The potential distribution by Poisson equation and carrier distribution by Maxwell-Boltzman statistics are used to calculate thermionic emission current, and WKB(Wentzel-Framers-Brillouin) approximation to tunneling current. The cutoff current is obtained by simple adding two currents since two current is independent. The subthreshold swings by this model are compared with those by two dimensional simulation and two values are good agreement. Since the tunneling current increases especially under channel length of 10nm, the characteristics of subthreshold swing is degraded. The channel and gate oxide thickness have to be fabricated as thin as possible to decrease this short channel effects and this process has to be developed. The subthreshold swings as a function of channel doping concentrations are obtained.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1451-1464
• /
• 2015

Recently, in recognition of their outstanding structural performance, the use of Concrete Filled Steel Tube (CFT) columns has been increased. New shape welded built-up square tube was developed by the authors for broader usability using thin steel plates which were bent to be L-shaped (Channel) and each unit members were welded to form square steel tube as an cost-efficient use of expensive steel. In addition, since the rib placed at the center of the tube width acts as an anchor; higher load capacity of buckling is achievable. In order to apply the new shape built-up square columns, the structural behavior and stress distribution with parameter width of thickness (b/t), with and without rib were predicted. The New shape welded built-up square tube effectively delayed the local buckling of the steel tube, which led to a greater strength and ductility than regular HSS.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.77-83
• /
• 1994

Characteristics of hot-electron-induced degradation by AC, DC was investigated for p-MOSFET's(W/L=25/l$\mu$m) with sub-10nm RTP-CVD gate oxides. It was confirmed that the surface channel p-MOSFET of a thinner gate oxide shows less degradation. Mechanisms for this effect were analyzed using a simple MOS Device degradation model. It was found that the number of generated electron traps(fixed charge) is determined by the amount of peak gate current, dependent of the gate oxide thickness, and the major cause of the smaller degradation in the thinner gate oxide devices is the lower hot electron trapping carriers.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.6
• /
• pp.253-256
• /
• 2010

Different active layer thicknesses for zinc oxide (ZnO) bottom-contact thin-film transistors (TFTs) were fabricated with a poly-4-vinyphenol polymeric dielectric using injector type atomic layer deposition. The properties of the ZnO TFTs were influenced by the active thickness and width-to-length (W/L) ratio of the device. The threshold voltage of ZnO TFTs shifted positively as the active layer thickness decreased, while the subthreshold slope decreased. The W/L ratio of ZnO TFTs also affected the mobility and subthreshold slope. An optimized TFT structure exhibited an on-tooff current ratio of above 106 with solid saturation.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.7
• /
• pp.109-116
• /
• 1998

In this work was produced and analyzed a z-cut Ti:LiNbO$_{3}$ optical waveguide which applies for various optical devices.A waveguide channel with a thickness 8 .mu.m and a length 66,000.mu.m and a mach-zehnder interferometer type waveguide were fabricated at a diffusion temperature 1050.deg. C for 6-8hours in a wet $O_{2}$ environment. The resulting Ti:LiNbO$_{3}$ optical waveguide was measured to have a Ti-strip thickness of 950.angs. and low loss. Surfaces and cross-sections of a fabricated waveguide were analysed. The mode pattern anaysis revealed that the waveguide showed a single mode at a 1550nm wavelength. The effective dimension of the waveguide was calculated by measuring a gaussian profile; Wx=10.95.mu. and Wy=9.14.mu.m. a propagation loss, of 0.50dB/cm for a TM mode and 0.45dB/cm for a TE mode, was low enough to be accepatable for optical devices.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.77-83
• /
• 1994

In this paper we numerically approximated the field-effect mobility of a-Si:H TFT. Field-effect mobility, based on the charge-trapping model and new effective capacitance model in our study, used Chebyshev approximation was approximated as the function of gate potential(gate-to-channel voltage). Even though various external factors are changed, this formula can be applied by choosing the characteristic coefficients without any change of the approximation formula corresponding to each operation region. Using new approximated field-effect mobility formula, the dependences of field-effect mobility on materials and thickness of gate insulator, thickness of a-Si bulk, and operation temperature in inverted staggered-electrode a-Si:H TFT were estimated. By this was the usefulness of new approximated mobility formula proved.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1727-1732
• /
• 2008

We present a facile, yet versatile carbon nanofabrication method using electron beam lithography and resist pyrolysis. Various resist nanopatterns were fabricated using a negative electron beam resist, SAL-601, and were then subjected to heat treatment in an inert atmosphere to obtain carbon nanopatterns. Suspended carbon nanostructures were fabricated by wet-etching of an underlying sacrificial oxide layer. Free-standing carbon nanostructures, which contain 122 nm-wide, 15 nm-thick, and 2 ${\mu}m$-long nanobridges, were fabricated by resist pyrolysis and nanomachining processes. Electron beam exposure dose effects on resist thickness and pattern widening were studied. The thickness of the carbon nanostructures was thinned down by etching with oxygen plasma. An electrical biosensor utilizing carbon nanostructures as a conducting channel was studied. Conductance modulations of the carbon device due to streptavidin-biotin binding and pH variations were observed.