• 펄프종이기술
• /
• 제43권4호
• /
• pp.67-75
• /
• 2011

Sulfuric acid hydrolysis is a typical approach for producing cellulose nanocrystals. The method has been widely used, but it has a disadvantage of low yield of cellulose nanocrystals compared to mechanical method. To expand the application of cellulose nanocrystals in practical, we should be able to produce them with higher yield and the controlled properties. In this study, therefore, we intended to investigate the effect of sulfuric acid hydrolysis condition on the characteristics of the prepared cellulose nanocrystals. The concentration of sulfuric acid, temperature and hydrolysis time were varied, and the yield as well as diverse properties including the morphology, size and zeta potential were examined. We could obtain cellulose nanocrystals up to 70% of yield and found that the properties were dependent on the reaction condition. It would be helpful to select an appropriate condition for producing cellulose nanocrystals.

• Journal of the Korean Wood Science and Technology
• /
• 제46권5호
• /
• pp.565-576
• /
• 2018

셀룰로오스 아세테이트(cellulose acetate, CA)는 높은 투명도와 열 저항성을 갖고 있어 복합소재 개발에 많이 응용되고 있다. 본 연구에서는 CA 복합재의 기계적 강도 개선을 위해 셀룰로오스 나노크리스탈 (cellulose nanocrystals, CNCs)을 강화제로 첨가하였다. CA 수지 내부에 CNCs의 고른 분산을 위해 선 분산(predispersion)법 적용 후, 압출 및 사출하는 제조 방식으로 CA 복합재를 제조하였다. 기계적 특성 분석 결과, CNCs를 3 wt% 첨가하였을 때 강화효과(reinforcing effect)로 인해 최대 인장강도와 굴곡강도 값을 보임을 확인하였다. 열중량 분석법을 이용한 열분해 거동 분석을 통해 황산 처리된 CNCs의 첨가는 CA 복합소재의 열안정성을 약간 감소시키는 결과를 얻었다.

• Carbon letters
• /
• 제20권
• /
• pp.32-38
• /
• 2016

In this study, cellulose nanoplates (CNPs) were fabricated using cellulose nanocrystals obtained from commercial microcrystalline cellulose (MCC). Their pyrolysis behavior and the characteristics of the product carbonaceous materials were investigated. CNPs showed a relatively high char yield when compared with MCC due to sulfate functional groups introduced during the manufacturing process. In addition, pyrolyzed CNPs (CCNPs) showed more effective chemical activation behavior compared with MCC-induced carbonaceous materials. The activated CCNPs exhibited a microporous carbon structure with a high surface area of 1310.6 m²/g and numerous oxygen heteroatoms. The results of this study show the effects of morphology and the surface properties of cellulose-based nanomaterials on pyrolysis and the activation process.

• Journal of the Korean Wood Science and Technology
• /
• 제48권2호
• /
• pp.231-244
• /
• 2020

As a way of finding value-added materials from waste medium density fiberboard (MDF), this study characterized cellulose nanocrystals (CNCs) isolated by ammonium persulfate (APS) oxidation using recycled MDF fibers. Chemical composition of the recycled MDF fibers was done to quantify α-cellulose, hemicellulose, lignin, nitrogen, ash and extractives. The APS oxidation was performed at 60 ℃ for 16 h, followed by ultrasonication, which resulted in a CNC yield of 11%. Transmission electron microscope images showed that rod-like CNCs had an average length and diameter of 167±47 nm and 8.24±2.28 nm, respectively, which gave an aspect ratio of about 20. The conductometric titration of aqueous CNCs suspension resulted in a carboxyl content of 0.24 mmol/g and the degree of oxidation was 0.04. Attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy clearly showed the presence of carboxyl group on the CNCs prepared by the APS oxidation. The change of pH of the aqueous CNC suspension from 4 to 7 converted the carboxyl group to sodium carboxylate group. These results showed that the APS oxidation was facile and CNCs had a one-step preparation method, and thus suggested an optimization of the oxidation condition in future.

• Journal of Biosystems Engineering
• /
• 제43권1호
• /
• pp.59-71
• /
• 2018

Purpose: Cellulose nanocrystals (CNCs) are natural polymers that have been promoted as a next generation of new, sustainable materials. CNCs are invaluable as reinforcing materials for composites because they can impart improved mechanical, chemical, and thermal properties and they are biodegradable. The purpose of this review is to provide researchers with information that can assist in the application of CNCs extracted from waste agricultural byproducts (e.g. rice husks, corncobs, pineapple leaves). Methods & Results: This paper presents the unique characteristics of CNCs based on agricultural byproducts, and lists processing methods for manufacturing CNCs from agricultural byproducts. Various mechanical treatments (microfluidization and homogenization) and chemical treatments (alkali treatment, bleaching and hydrolysis) can be performed in order to generate nanocellulose. CNC-based composite properties and various applications are also discussed. Conclusions: CNC-based composites from agricultural byproducts can be combined to meet end-use applications such as sensors, batteries, films, food packaging, and 3D printing by utilizing their properties. The review discusses applications in food engineering, biological engineering, and cellulose-based hydrogels.

• Journal of the Korean Wood Science and Technology
• /
• 제47권5호
• /
• pp.597-606
• /
• 2019

Cellulose nanocrystals (CNCs) were successfully isolated from oil palm fronds (OPFs) using different concentrations of ammonium persulfate (APS), and their characteristics were analyzed by Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), X-ray diffraction (XRD) analysis, and thermogravimetric analysis (TGA). APS oxidation effectively isolated CNCs with rod-like morphology in nanometer scale. The dimensions of the CNCs decreased with increasing APS concentration. FTIR and XRD analyses revealed that all the CNCs showed crystals in the form of cellulose I without crystal transformation occurring during APS treatment. The relative crystallinity of the CNCs increased with increasing APS concentration, whereas their thermal stability decreased. An APS concentration of 2 M was found to be optimal for isolating the CNCs.

• 한국결정성장학회지
• /
• 제34권3호
• /
• pp.79-85
• /
• 2024

고압 균질기를 이용하여 면 셀룰로오스 원료로부터 직접 셀룰로오스 나노결정을 추출하고 이에 대한 결정 구조 및 화학적 결합 상태에 대한 연구를 수행하였다. 형성된 셀룰로오스 나노결정은 나노와이어 형태의 구조적 특성을 가지며, 조밀한 구조의 메쉬 형태로 분포하였다. X-ray diffraction (XRD) 분석을 통해 관찰된 Bragg 결정면의 면간거리 계산을 통해 고압 균질기로부터 추출된 셀룰로오스 나노결정이 셀룰로오스 Iβ 하부 다형체인 monoclinc 결정구조를 갖음을 확인하였다. 셀룰로오스 나노결정에 포함된 비정질 영역을 정량적으로 평가하기 위한 Solid-state nuclear magnetic resonance(NMR) 분석 결과 셀룰로오스 나노결정의 결정화도 지수는 5 3.06 %로 계산되었다. 형성된 셀룰로오스 나노결정 표면의 O/C ratio는 0.82로 계산되었으며, C-C 결합 혹은 C-H 결합, C-O 결합, O-C-O 결합 혹은 C=O 결합, O-C=O 결합의 화학적 결합이 셀룰로오스 나노결정 표면의 주요 화학적 상태임을 알 수 있었다.

• Advances in concrete construction
• /
• 제8권4호
• /
• pp.311-320
• /
• 2019

In this study, the effect of cellulose nanocrystals (CNCs) on the fire resistance properties of fiber-reinforced cement composites was investigated. The main variables were CNCs content (0.4, 0.8 and 1.2vol.% compared with cement), steel fiber ratio, and exposure temperature (100, 200, 400, 600 and 800℃). The fire resistance properties, i.e., residual compressive strength, flexural strength, and porosity, were evaluated in relation with the exposure temperature of the specimens. The CNCs suspensions were prepared to composited dispersion method of magnetic stirring and ultra-sonication. CNCs are effective for increasing the compressive strength at high temperatures but CNCs do not seem to have a significant effect on flexural reinforcement. Porosity test result showed CNCs reduce the non-hydration area inside the cement and promote hydration.

• Journal of Biosystems Engineering
• /
• 제40권4호
• /
• pp.373-393
• /
• 2015

Background: Cellulose is a ubiquitous, renewable and environmentally friendly biopolymer, which has high promise to fulfil the rising demand for sustainable and biocompatible materials. Particularly, the recent progress in the synthesis of highly crystalline cellulose-based nanoscale biomaterials, namely cellulose nanocrystals (CNCs), draws significant attention from many research communities, ranging from bioresource engineering, to materials science and engineering, to biological and biomedical engineering to bionanotechnology. The feasibility of harnessing CNCs' unique biophysicochemical properties has inspired their basic and applied research, offering much promise for new biomaterials with diverse advanced functionalities. Purpose: This review focuses on vital issues and topics on the recent advances in CNC-based biomaterials with potential, in particular, for bionanotechnology and biological and biomedical engineering. The challenges and limitations of CNC technology are discussed as well as potential strategies to overcome them, providing an essential source of information in the exploration of possible and futuristic applications of the CNC-based functional "green" nanomaterials. Conclusion: CNCs offer exciting possibilities for advanced "green" nanomaterials, driving innovative research and development in a wide range of fields, including biological and biomedical engineering.

• 펄프종이기술
• /
• 제48권1호
• /
• pp.5-18
• /
• 2016

Electron microscopy is an important investigation and analytical method for the morphological characterization of various cellulosic materials, such as micro-crystalline cellulose (MCC), microfibrillated cellulose (MFC), nanofibrillated cellulose (NFC), and cellulose nanocrystals (CNC). However, more accurate morphological analysis requires high-quality micrographs acquired from the proper use of an electron microscope and associated sample preparation methods. Understanding the interaction of electron and matter as well as the importance of sample preparation methods, including drying and staining methods, enables the production of high quality images with adequate information on the nanocellulosic materials. This paper provides a brief overview of the micro and nano structural analysis of cellulose, as investigated using transmission and scanning electron microscopy.