• 한국재료학회지
• /
• 제31권6호
• /
• pp.325-330
• /
• 2021

Bi₂MoO₆ (BMO) via the structure-directing role of CO(NH₂)₂ is successfully prepared via a facile solvothermal route. The structure, morphology, and photocatalytic performance of the nanoflake BMO are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), fluorescence spectrum analysis (PL), UV-vis spectroscopy (UV-vis) and electrochemical test. SEM images show that the size of nanoflake BMO is about 50 ~ 200 nm. PL and electrochemical analysis show that the nanoflake BMO has a lower recombination rate of photogenerated carriers than particle BMO. The photocatalytic degradation of tetracycline hydrochloride (TC) by nanoflake BMO under visible light is investigated. The results show that the nanoflake BMO-3 has the highest degradation efficiency under visible light, and the degradation efficiency reached 75 % within 120 min, attributed to the unique hierarchical structure, efficient carrier separation and sufficient free radicals to generate active center synergies. The photocatalytic reaction mechanism of TC degradation on the nanoflake BMO is proposed.

• 한국주거학회논문집
• /
• 제13권2호
• /
• pp.73-78
• /
• 2002

Recently, the energy consumption has been sharply increased and the environmental pollution has been serious, resulted in increased use of fossil fuel. These facts are applied to most fields, and are especially important issues in the field of architecture. The energy consumption rate of building is about 30% of all energy consumption, and the rate of residential is about 20% of the rate of building and is increasing gradually. The purpose of this article is firstly to analyse an actual energy consumption rate of model building and compare it with alternative methods, which are applied passive system to, and secondly to suggest an optimal passive method for saving energy. The conclusion of this study is as follows; 1) As compared with the existing house on actual energy consumption rate, 6% in changing orientation to a south, 9% in using double low-e glazing and 23% in shading is decreased. 2) The change of insulation from 50 to 100mm did not show dramatical difference in energy consumption rate. 3) As changed indoor temperature at 2$0^{\circ}C$ in winter and 27$^{\circ}C$ in summer, the rate shows a reduction of 14% compared with the existing condition.

• 보건교육건강증진학회지
• /
• 제26권1호
• /
• pp.141-158
• /
• 2009

Community-Based Participatory Research(CBPR) has gained attention as a public health approach to develop community health interventions to address health disparities in recognition of the community relevance of specific health issues associated with social determinants of health. It emphasizes community involvement in equal partnership with researchers and public health professionals to address community-identified needs. The characteristics and principles of CBPR discussed in this paper highlight participatory nature, capacity development, partnership building, and process-orientation of CBPR. A 6-step process model for community empowerment is then introduced as a CBPR operationalization strategy. Mixed methods research approaches are valuable in CBPR as well as process evaluation. For the application of CBPR in Korean contexts, the Diffusion of Innovation theory is suggested as a theoretical framework for implementation. Building public health partnerships between public and private sectors to create partnership synergy is a necessary condition for successful CBPR for health promotion in Korea. Accompanying critical factors for the CBPR application include: common understanding of CBPR and its values, establishment of the definition of 'community,' 'community-based' and 'participation' in community health, development of accommodating research infrastructure for CBPR, recognition of the importance of program evaluation (particularly process evaluation), and training CBPR specialists.

• 한국실내디자인학회논문집
• /
• 제25권4호
• /
• pp.3-12
• /
• 2016

The purpose of this study was to analyze City squares in Europe according to Biophilic Design elements to apply domestic Indoor Squares in Mixed-use building for relaxation. This study seeks to present a direction for designing an indoor square that uses the aspects of European city square. The following details consist the purpose of the study. First, Perspective from the Biophilic design and analyzing criteria of Europe city square. Second, European city square is analyzed to establish the criteria to be applied to indoor square. Third, based on European city square analysis, the planning direction for domestic indoor square is suggested. This result of paper proceeds as follows. First, it describes the analysis of the Indoor Squares of the domestic Mixed-use building. The results were derived of the fact that not applying the water elements and Facade greening. Second, In Europe Square, It is accounted for the highest proportion (33%) of the spaciousness. Third, Through a comparative analysis domestic indoor square was derived that the higher the need to improve the spaciousness and botanical motif. It is the ultimate goal of this study based on the analysis of the city square to set the criteria for the biophilic design of the indoor square to present the orientation of the indoor square.

• 한국주거학회논문집
• /
• 제18권6호
• /
• pp.35-44
• /
• 2007

The purpose of this paper is to find out the factors affecting the apartment price given three sets of variables such as characteristics of apartment building, apartment site, and location. Data of 1,579 housing units in 224 apartment complex sites in Ilsan city were selected from the housing information of four public and private housing sources in 2006. The first set of variables for physical features include housing size (pyoung), preferring-floor, building orientation, heating system and structure of entrance. The second set of variables for building were number of housing units, built year and rank of construction company. The third set of variables for location were distance from number of school, the subway station, distance of department store and park. For the analysis, the hedonic price model, which was one of the methods to estimate social convenience, was used along with the SPSS statistical program and regression analysis. The results are as follows, Firstly, in the structural characteristic variables, it was analyzed that all of the variables except facing affected the apartment price. Secondly, In the site characteristic variables, unusually all of the variables were not affected the apartment price in Ilsan city. Finally, the locational characteristic variables number of school, the subway station, distance of department store and park affected the apartment price. In case of Ilsan city, educational facilities was likely to positively contribute to the price of apartment.

• 한국멀티미디어학회논문지
• /
• 제11권2호
• /
• pp.228-236
• /
• 2008

최근 증강현실 기술을 이용하여 시공 전의 건축물이나 복원 중인 문화재를 확인하기 위한 연구들이 진행되어 왔다. 기존의 연구들은 특수 장비를 사용하거나 실외의 장거리에서 사용이 어려운 마커를 사용하였으며, 매번 서버에서 가상 객체의 변환을 계산하므로 서버 부하가 우려되기도 한다. 본 논문에서 제안하는 모바일 증강현실 시스템은 휴대폰의 GPS와 가속도 센서를 이용하여 마커 없이도 사용자의 위치 및 방향을 판단하며, 최대한 서버의 부하가 적도록 설계하였다. 서버는 클라이언트로부터 얻은 GPS의 위치정보와 카메라의 영상정보를 미리 정의되어 있는 3D 객체와 비교를 하여 위치와 방향을 판단한다. 그리고 계산된 위치와 방향의 가상 건축물 정보와 정합정보를 클라이언트로 전송하면 이를 받아 카메라 영상 위에 정합한다. 이후에는 서버와 추가적인 접속 없이 클라이언트 내에서 가속도 센서로 감지한 사용자의 움직임에 따라 가상 건축물의 변환을 수행할 수 있다.

• Steel and Composite Structures
• /
• 제18권3호
• /
• pp.583-601
• /
• 2015

In the present study, the combined effects of thermal and mechanical loadings on the interlaminar shear stresses of both moderately thin and thick composite laminated beams are numerically analyzed. The finite element modelling of laminated composite beams and analysis of interlaminar stresses are performed using the commercially available software package MSC NASTRAN/PATRAN. The validity of the finite element analysis (FEA) is demonstrated by comparing the experimental test results obtained due to mechanical loadings under the influence of thermal environment with those derived using the present FEA. Various parametric studies are also performed to investigate the effect of thermal loading on interlaminar stresses generated in symmetric, anti-symmetric, asymmetric, unidirectional, cross-ply, and balanced composite laminated beams of different stacking sequences with identical mechanical loadings and various boundary conditions. It is shown that the elevated thermal environment lead to higher interlaminar shear stresses varying with the stacking sequence, length to thickness ratio, ply orientations under identical mechanical loading and boundary conditions of the composite laminated beams. It is realized that the magnitude of the interlaminar stresses along xz plane is always much higher than those of along yz plane irrespective of the ply-orientation, length to thickness ratios and boundary conditions of the composite laminated beams. It is also observed that the effect of thermal environment on the interlaminar shear stresses in carbon-epoxy fiber reinforced composite laminated beams are increasing in the order of symmetric cross-ply laminate, unidirectional laminate, asymmetric cross-ply laminate and anti-symmetric laminate. The interlaminar shear stresses are higher in thinner composite laminated beams compared to that in thicker composite laminated beams under all environmental temperatures irrespective of the laminate stacking sequence, ply-orientation and boundary conditions.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 추계학술발표대회 논문집
• /
• pp.364-369
• /
• 2011

Recently, the cases of BIPV(Building-integrated Photovoltaic) have been increased with interest in renewable energy application for buildings. PV System in building can perform a variety of roles as an energy supplier, exterior materials, aesthetic element and etc. To apply PV modules in buildings, various factors should be considered, such as the installation angle and orientation of PV module, shading, and temperature. The temperature of PV modules that are attached to building surfaces especially is one of the most important factors, as it affects both the electrical efficiency of a PV module and the energy load in a building. BIPV modules designed as finished material for spandrels are presented in this paper. The purpose of this study is to analysis on the thermal performance characteristics of BIPV modules. This study dealt with different types of BIPV modules depending on the backside material, such as clear glass and backsheet. The analysis of monitoring data shows that the PV module temperature was closely related to the solar radiation on the BIPV module surface, and the BIPV used at the backside also had an effect on the PV module temperature that in turn determines its thermal performance.

• 동력기계공학회지
• /
• 제17권3호
• /
• pp.57-64
• /
• 2013

This study focus on the analysis of the energy performance in accordance with apartment houses arrangement type by using Ecotect Analysis. Korea, energy-poor country, the rate of dependence on imports amount to 94%, have to reduce energy consumption part of building except in industry and transport which affect the economic. Apartment houses are built in various forms in order to reduce energy, are modelled in each window area ratio, shape, orientation, climate through simulation. Through this study, we can analyze energy performance by form, window area ratio, orientation, climate change and know the optimal elements by the form. In particular, although there have been studied research on the window area ratio and research related to the arrangement form, determined that the information on the regional climate characteristics and the direction of placement is less than existing research. To supplement those problem, adding to seven direction(West, S-60-W, S-30-W, South, S-30-E, S-60-E, East) and climatic element(southern region) is characteristic of this study. The form of apartment houses was modelled for apartment houses built in the 10 years since. And each modeling were analyzed by Ecotect Analysis.

• 한국정보시스템학회지:정보시스템연구
• /
• 제20권2호
• /
• pp.207-228
• /
• 2011

IT governance is an integral part of enterprise governance and consists of the leadership, organizational structures, and processes that ensure organization's IT decision making for achieving organizational goal. Most firms have failed to resolve the balance in building IT governance. The challenge is to align IT strategy with business strategy in establishing and implementing effective IT governance. The purpose of this study is to find out the relationship between IT governance implementation factors and IS effectiveness, and the moderating effect of strategic alignment of IS strategy with business strategy on IS effectiveness. IT governance implementation factors consist of IT vendor management, IT human resource management, and IT infrastructure. Strategic alignment was measured as the alignment between business strategic orientation and IS strategic orientation that used in the research of Chan et al.(1997). In the relationship between three IT governance implementation factors and IS effectiveness, the results of multiple regression analyses showed that IT human resource management is an important determinant to influence IS effectiveness. The additional analysis using multiple regression showed that strategic alignment of IS strategy with business strategy has moderated the relationship between IT governance implementation factors and IS effectiveness.