• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.74-74
• /
• 2009

Titanium nitride has been used as hardmask for semiconductor process, capacitor of MIM type and diffusion barrier of DRAM, due to it's low resistivity, thermodynamic stability and diffusion coefficient. Characteristics of the TiN film are high intensity and chemical stability. The TiN film also has compatibility with high-k material. This study is an experimental test for better condition of TiN film etching process. The etch rate of TiN film was investigated about etching in $BCl_3/Ar/O_2$ plasma using the inductively coupled plasma (ICP) etching system. The base condition were 4 sccm $BCl_3$ /16 sccm Ar mixed gas and 500 W the RF power, -50 V the DC bias voltage, 10 mTorr the chamber pressure and $40\;^{\circ}C$ the substrate temperature. We added $O_2$ gas to give affect etch rate because $O_2$ reacts with photoresist easily. We had changed $O_2$ gas flow rate from 2 sccm to 8 sccm, the RF power from 500 W to 800 W, the DC bias voltage from -50 V to -200 V, the chamber pressure from 5 mTorr to 20 mTorr and the substrate temperature from $20\;^{\circ}C$ to $80\;^{\circ}C$.

• Journal of Acupuncture Research
• /
• 제36권4호
• /
• pp.238-244
• /
• 2019

Background: This study aimed to investigate the protective effects of Zanthoxylum bungeanum Maxim pharmacopuncture on disuse muscle atrophy in the gastrocnemius muscle of rats. Methods: Thirty male 250 g Sprague-Dawley rats were distributed randomly into 3 groups. The left hindlimb immobilization was performed with casting tape for 2 weeks, and no treatment was given to the right hindlimb. Rats received pharmacopuncture and were injected daily on the BL57 with either 2 mL of Zanthoxylum bungeanum Maxim aqueous extract (ZM-W group), 1 mL pharmacopuncture of Zanthoxylum bungeanum Maxim ethanol extract (ZM-E group), or 2 mL normal saline (control group). After 2 weeks of immobilization, the weight of the whole gastrocnemius muscle was measured, and the morphology of both the left and the right gastrocnemius muscles were assessed by Hematoxylin and Eosin staining. To investigate the immobilization-induced muscular apoptosis, the immunohistochemical analysis of BAX and Bcl-2 was carried out. Results: ZM-W and ZM-E significantly inhibited the reduction in weight of the left gastrocnemius muscle, the reduction in the left myofibrils, and the cross-sectional area of gastrocnemius, as compared with the control. Moreover, the ZM-W and ZM-E groups showed significantly reduced immunoreactivity for BAX, and increased immunoreactivity of Bcl-2 in left gastrocnemius muscle compared with the control group. Conclusion: These results suggest that Zanthoxylum bungeanum Maxim pharmacopuncture has protective effects against immobilization-induced muscle atrophy by regulating the activity of apoptosis-associated BAX / Bcl-2 proteins in the gastrocnemius muscle.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권6호
• /
• pp.511-518
• /
• 2001

The effect of mycolactone, a recently reported apoptosis-inducing factor, was investigated in SCC15 oral squamous cell carcinoma(OSCC) cell line. Mycolactone rapidly induced cell death in OSCC cells in 2days, which was similar to that found in apoptotic cell such as detaching from culture plate and rounding-up of cells. Apoptotic cells were increased 4hrs after mycolactone treatment and more than half of cells showed apoptosis after 72hrs. Caspase 3 activation a biochemical evidence of apoptosis, was determined by Western blotting. Caspase 3 activation was started at 2hrs that lasted until 8hrs after mycolactone treatment. The expression of bcl-2 family genes was determined to explain the mechanism of apoptosis found in OSCC cells. The expressions of bad, bak, and bax (pro-apoptotic genes) and bcl-w and bcl-2 genes (anti-apoptotic genes) were not changed by mycolactone treatment. The expression of bcl-xi was decreased 8 hrs after mycolactone treatment. Mcl-1 expression was initially increased at 2 hrs which was decreased 8 hrs after mycolactone treatment. The down-regulation of these two anti-apoptotic genes might explain the mycolactone-induced apoptosis in OSCC cells. In this study, mycholactone was revealed to induce cell death in OSCC cells apoptosis and the apoptosis mechanism of OSCC cells was shown to be down-regulation of anti-apoptotic genes, bcl-xi and mcl-1. These results suggested the applicability of mycolactone for the development of an anti-cancer drug candidate by inducing apoptosis of OSCC cancer cell.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.826-830
• /
• 2013

In this paper, we carried out the investigations of both etch characteristics and mechanisms for the $SnO_2$ thin films in $O_2/BCl_3/Ar$ plasma. The dry etching characteristics of the $SnO_2$ thin films was studied by varying the $O_2/BCl_3/Ar$ gas mixing ratio. We determined the optimized process conditions that were as follows: a RF power of 700 W, a DC-bias voltage of - 150 V, and a process pressure of 2 Pa. The maximum etch rate was 509.9 nm/min in $O_2/BCl_3/Ar$=(3:4:16 sccm) plasma. From XPS analysis, the etch mechanism of the $SnO_2$ thin films in the $O_2/BCl_3/Ar$ plasma can be identified as the ion-assisted chemical reaction while the role of ion bombardment includes the destruction of the metal-oxide bonds as well as the cleaning of the etched surface form the reaction products.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.56-56
• /
• 1999

For advanced TFT-LCD manufacturing processes, dry etching of thin-film layers(a-Si, $SiN_x$, SID & gate electrodes, ITO etc.) is increasingly preferred instead of conventional wet etching processes. To dry etch Al gate electrode which is advantageous for reducing propagation delay time of scan signals, high etch rate, slope angle control, and etch uniformity are required. For the Al gate electrode, some metals such as Ti and Nd are added in Al to prevent hillocks during post-annealing processes in addition to gaining low-resistivity($<10u{\Omega}{\cdot}cm$), high performance to heat tolerance and corrosion tolerance of Al thin films. In the case of AI-Nd alloy films, however, low etch rate and poor selectivity over photoresist are remained as a problem. In this study, to enhance the etch rates together with etch uniformity of AI-Nd alloys, magnetized inductively coupled plasma(MICP) have been used instead of conventional ICP and the effects of various magnets and processes conditions have been studied. MICP was consisted of fourteen pairs of permanent magnets arranged along the inside of chamber wall and also a Helmholtz type axial electromagnets was located outside the chamber. Gas combinations of $Cl_2,{\;}BCl_3$, and HBr were used with pressures between 5mTorr and 30mTorr, rf-bias voltages from -50Vto -200V, and inductive powers from 400W to 800W. In the case of $Cl_2/BCl_3$ plasma chemistry, the etch rate of AI-Nd films and etch selectivity over photoresist increased with $BCl_3$ rich etch chemistries for both with and without the magnets. The highest etch rate of $1,000{\AA}/min$, however, could be obtained with the magnets(both the multi-dipole magnets and the electromagnets). Under an optimized electromagnetic strength, etch uniformity of less than 5% also could be obtained under the above conditions.

• 한국표면공학회지
• /
• 제36권4호
• /
• pp.334-338
• /
• 2003

$BCl_3$고밀도 평판형 유도결합 플라즈마(High Density Planar Inductively Coupled Plasma)를 이용하여 AlGaAs와 InGaP의 건식식각에 대하여 연구하였다. 본 실험에서는 ICP 소스파워(0∼500 W), RIE 척 파워(0-150 W), 공정압력(5∼15 mTorr)의 변화에 따른 AlGaAs와 InGaP의 식각률, 식각단면 그리고 표면 거칠기 등을 분석 하였다. 또, 공정 중 OES(Optical Emission Spectroscopy)를 이용하여 in-situ로 플라즈마를 관찰하였다. $BCl_3$ 유도결합 플라즈마를 이용한 AlGaAs의 식각결과는 우수한 수직측벽도와(>87$^{\circ}$) 깨끗하고 평탄한 표면(RMS roughness = 0.57 nm)을 얻을 수 있었다. 반면, InGaP의 경우에는 식각 후 표면이 다소 거칠어진 것을 확인할 수 있었다. 모든 공정조건에서 AlGaAs의 식각률이 InGaP보다 더 높았다. 이는 $BCl_3$ 유도결합 플라즈마를 이용하여 InGaP을 식각하는 동안 $InCl_{x}$ 라는 휘발성이 낮은 식각부산물이 형성되어 나타난 결과이다. ICP 소스파워와 RIE 척파워가 증가하면 AlGaAs와 InGaP모두 식각률이 증가하였지만, 공정압력의 증가는 식각률의 감소를 가져왔다. 그리고 OES peak세기는 공정압력과 ICP 소스파워의 변화에 따라서는 크게 변화하였지만 RIE 척파워에 따라서는 거의 영향을 받지 않았다.

• Transactions on Electrical and Electronic Materials
• /
• 제9권1호
• /
• pp.1-5
• /
• 2008

ZnS is an attractive material for future optical and electrical devices since it has a direct and wide band gap to provide blue emission at room temperature. In this study, inductively coupled $BCl_3/Ar$ plasma was used to etch ZnS:Mn thin films. The maximum etch rate of 164.2 nm/min for ZnS:Mn was obtained at a $BCl_3(20)/Ar(80)$ gas mixing ratio, an rf power of 700 W, a dc bias voltage of -200V, a total gas flow of 20 sccm, and a chamber pressure of 1Pa. The etch behaviors of ZnS:Mn thin films under various plasma parameters showed that the ZnS:Mn were effectively removed by the chemically assisted physical etching mechanism. The surface reaction of the ZnS:Mn thin films was investigated by X-ray photoelectron spectroscopy. The XPS analysis revealed that Mn had detected on the surface ZnS:Mn etched in $BCl_3/Ar$ plasma.

• Transactions on Electrical and Electronic Materials
• /
• 제12권3호
• /
• pp.106-109
• /
• 2011

We investigated the etching characteristics of titanium nitride (TiN) thin film in $BCl_3$/Ar inductively coupled plasma. The etching parameters were the gas mixing ratio, radio frequency (RF) power, direct current (DC)-bias voltages and process pressures. The standard conditions were as follows: total flow rate = 20 sccm, RF power = 500 W, DC-bias voltage = -100 V, substrate temperature = $40^{\circ}C$, and process pressure = 15 mTorr. The maximum etch rate of TiN thin film and the selectivity of TiN to $Al_2O_3$ thin film were 54 nm/min and 0.79. The results of X-ray photoelectron spectroscopy showed no accumulation of etch byproducts from the etched surface of TiN thin film. The TiN film etch was dominated by the chemical etching with assistance by Ar sputtering in reactive ion etching mechanism, based on the experimental results.

• Transactions on Electrical and Electronic Materials
• /
• 제12권4호
• /
• pp.144-147
• /
• 2011

In this work, we present a study regarding the etching characteristics on titanium nitride (TiN) thin films using an inductively coupled plasma system. The TiN thin film was etched using a $N_2/BCl_3$/Ar plasma. The studied etching parameters were the gas mixing ratio, the radio frequency (RF) power, the direct current (DC)-bias voltages, and the process pressures. The baseline conditions were as follows: RF power = 500 W, DC-bias voltage = -150 V, substrate temperature = $40^{\circ}C$, and process pressure = 15 mTorr. The maximum etch rate and the selectivity of the TiN to the $SiO_2$ thin film were 62.38 nm/min and 5.7, respectively. The X-ray photoelectron spectroscopy results showed no accumulation of etching byproducts from the etched surface of the TiN thin film. Based on the experimental results, the etched TiN thin film was obtained by the chemical etching found in the reactive ion etching mechanism.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1382-1383
• /
• 2006

ZnO 박막은 wide band gap(Eg=3.37eV)의 derect band gap을 갖고 있기 때문에 여러 소자로의 응용가능성에 큰 기대를 하고 있는 물질이다. 본 논문에서는 소자 제조과정에서 요구되는 ZnO 박막의 식각변수에 따른 식각율과 식각특성에 관하여 연구하였으며 Inductively coupled plasma(ICP)를 사용하여 $BCl_3$/Ar 가스를 혼합하여 식각을 하였다. $BCl_3$/Ar=8/2 플라즈마에서 화학적 식각의 도움을 받아 ZnO 박막의 식각률은 1724 ${\AA}/min$ 로 최고를 보였으며 이때의 공정 조건은 800 W 의 RF power, 400 W 의 bias power, 1 Pa 의 공정 압력이었다. 식각시에 플라즈마 내부의 이온 거동상태를 측정하기위해 quadrupolemass spectrometer(QMS)를 사용하여 분석하였고 식각후 ZnO 박막의 식각률은 surface profiler(KLA fencer, ${\alpha}$-step 500)을 이용하여 측정하고 ZnO 박막과 B, Cl 라디칼과의 표면 반응 상태를 고찰하기 위하여 식각된 ZnO 박막의 표면을 X-ray photoelectron spectroscopy(XPS)로 분석하였다. XPS를 통하여 ZnO 박막과 Cl 라디칼과 반응을 하여 식각된다는 것과 낮은 휘발성으로 인하여 Ar 이온에 의한 스퍼터링 효과의 도움에 의해서 식각이 진행됨을 확인하였다.