• 한국진공학회지
• /
• 제16권2호
• /
• pp.110-115
• /
• 2007

Atomic layer deposition(ALD)에 유도결합 플라즈마 소스를 채용하여 plasma enhanced ALD(PEALD)장치를 제작하고 플라즈마 발생 실험을 수행하였다. ALD와 PEALD를 이용하여 기판온도 $230^{\circ}C$에서 p-type Si(100)기판 위에 Co박막을 증착하였다. 이때, $Co_{2}(CO)_{6}$을 Co전구체로, 암모니아를 반응가스로, 아르곤을 캐리어(carrier) 및 퍼지(purge)가스로 사용하였다. 증착된 Co박막의 구성성분과 박막의 두께를 auger electron spectroscopy(AES)와 field emission scanning electron microscopy(FESEM)을 이용하여 분석하였다. ALD와 PEALD를 이용하여 증착된 Co박막에서 모두 불순물이 발견되었는데, PEALD의 경우 ALD에 비해 불순물의 양이 약 반으로 감소되었다. 암모니아 플라즈마가 Co전구체에 포함된 탄소와의 반응을 매우 효과적으로 유도하는 것으로 확인되었다.

• 세라미스트
• /
• 제23권2호
• /
• pp.132-144
• /
• 2020

Solid oxide fuel cell (SOFC) have attracted much attention due to clean, efficient and environmental-friendly generation of electricity for next-generation energy conversion devices. Recently, many studies have been reported on improving the performance of SOFC electrodes and electrolytes by applying atomic layer deposition (ALD) process, which has advantages of excellent film quality and conformality, and precise control of film thickness by utilizing its unique self-limiting surface reaction. ALD process with these advantages has been shown to provide functional ceramic interfaces for SOFC electrodes and electrolytes. In this article, recent examples of successful functionalization and stabilization on SOFC electrodes and electrolytes by the application of ALD process for realizing high performance SOFC cells are reported.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.270-270
• /
• 2016

We fabricated an organic-inorganic nano laminated encapsulation layer using molecular layer deposition (MLD) combined with atomic layer deposition (ALD). The $Al_2O_3$ inorganic layers as an effective single encapsulation layer were deposited at 80 degree C using ALD with alternating surface-saturation reactions of TMA and $H_2O$. A self-assembled organic layers (SAOLs) were fabricated at the same temperature using MLD. MLD and ALD deposition process were performed in the same reaction chamber. The prepared SAOL-$Al_2O_3$ organic-inorganic nano laminate films exhibited good mechanical stability and excellent encapsulation property. The measurement of water vapor transmission rate (WVTR) was performed with Ca test. We controlled thickness-ratio of organic and inorganic layer, and specific ratio showed a lowest WVTR value. Also this encapsulation layer contained very few pin-holes or defects which were linked in whole area by defect test. To apply into real OLEDs panels, we controlled a film stress from tensile to compressive and flexibility defined as an elastic modulus with organic-inorganic ratio. It has shown that OLEDs panel encapsulated with nano laminate layer exhibits better properties than single layer encapsulated in acceleration conditions. These results indicate that the organic-inorganic nano laminate thin films have high potential for flexible display applications.

• 한국진공학회지
• /
• 제16권3호
• /
• pp.205-209
• /
• 2007

Atomic layer deposition(ALD)를 이용하여 Si와 soda lime glass 기판 위에 ZnO 박막을 증착하였다. 기판의 온도는 비교적 저온인 $130^{\circ}C{\sim}150^{\circ}C$를 채택하였다. 증착결과 단위 cycle 당 $2.72{\AA}$이 증착되어 균일한 박막이 증착되었음이 확인되었다. 증착된 박막의 결정성을 X-ray diffraction(XRD)으로 조사해본 결과 비교적 저온에서도 (100)과 (101)방향의 성장이 우세하였다. 또 Auger electron spectroscopy(AES)로 분석해본 결과 불순물이 없는 순도 높은 박막이 성장되었음을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.478.2-478.2
• /
• 2014

Atomic layer deposition (ALD) provides self-limiting processes based on chemisorption-based reactions. Such unique features allow for superior step coverage, atomic-scale control in thickness, and surface-dependent reaction controls. Furthermore, the surface-limited deposition enables the artificial deposition of oxide and/or metallic materials onto the porous systems as long as the supply is guaranteed in terms of time in providing reactant species and removing the byproducts and redundant reactants. The unique feature of atomic layer deposition is applied to solid oxide fuel cells whose incorporates two porous cathode and anode compartments in addition to the ionic electrolyte. Specific materials are deposited to the surface sites of porous electrodes, with the aim to controlling the triple phase boundaries crucial for the optimized SOFC performances. The effect of ALD on the SOFC performance is characterized using current-voltage characteristics in addition to frequency-dependent impedance spectroscopy. The pros and cons of ALD-controlled SOFCs are discussed toward high-performance SOFC systems.

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.164-168
• /
• 2005

Piezoelectric ZnO thin films were for the first time formed on SiO$_2$/Si(100) substrate using 2-step deposition, atomic layer deposition(ALD) and RF magnetron sputtering deposition, for film bulk acoustic resonator(FBAR) applications. The ZnO buffer layer by ALD was deposited using alternating diethyl zinc(DEZn)/$H_2O$ exposures and ultrahigh purity argon gas for purging. The ZnO films by 2-step deposition revealed stronger c-axis-preferred orientation and smoother surface than those by the conventional RF sputtering method. The solidly mounted resonator(SMR)-typed FBAR fabricated by using 2-step deposition method revealed higher quality factor of 580 and lower return loss of -17.35dB. Therefore the 2-step deposition method in this study could be applied to the FBAR device fabrication.

• 한국전기전자재료학회논문지
• /
• 제29권7호
• /
• pp.440-444
• /
• 2016

Titanium oxide ($TiO_2$) thin films were synthesized on polymer insulator and Si substrates by atomic layer deposition (ALD) method. The surface and electrical properties of $TiO_2$ films synthesized at various ALD cycle numbers were investigated. The synthesized $TiO_2$ films exhibited higher contact angle and smooth surface. The contact angle of $TiO_2$ films was increased with the increase of ALD-cycle number. Also, the rms surface roughness of films was slightly rough with the increase of ALD-cycle number. The leakage current on $TiO_2$ film surface synthesized at various conditions were uniformed, and the values were decreased with the increase of ALD-cycle number. In the results, the performance of $TiO_2$ films for self-cleaning critically depended on a number of ALD-cycle.

• 한국분말재료학회지
• /
• 제26권3호
• /
• pp.243-250
• /
• 2019

Atomic layer deposition (ALD) is widely used as a tool for the formation of near-atomically flat and uniform thin films in the semiconductor and display industries because of its excellent uniformity. Nowadays, ALD is being extensively used in diverse fields, such as energy and biology. By controlling the reactivity of the surface, either homogeneous or inhomogeneous coating on the shell of nanostructured powder can be accomplished by the ALD process. However, the ALD process on the powder largely depends on the displacement of powder in the reactor. Therefore, the technology for the fluidization of the powder is very important to redistribute its position during the ALD process. Herein, an overview of the three types of ALD reactors to agitate or fluidize the powder to improve the conformality of coating is presented. The principle of fluidization its advantages, examples, and limitations are addressed.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.22.2-22.2
• /
• 2009

Currently, metal silicides become increasingly more essential part as a contact material in complimentary metal-oxide-semiconductor (CMOS). Among various silicides, NiSi has several advantages such as low resistivity against narrow line width and low Si consumption. Generally, metal silicides are formed through physical vapor deposition (PVD) of metal film, followed by annealing. Nanoscale devices require formation of contact in the inside of deep contact holes, especially for memory device. However, PVD may suffer from poor conformality in deep contact holes. Therefore, Atomic layer deposition (ALD) can be a promising method since it can produce thin films with excellent conformality and atomic scale thickness controllability through the self-saturated surface reaction. In this study, Ni thin films were deposited by thermal ALD using bis(dimethylamino-2-methyl-2-butoxo)nickel [Ni(dmamb)2] as a precursor and NH3 gas as a reactant. The Ni ALD produced pure metallic Ni films with low resistivity of 25 $\mu{\Omega}cm$. In addition, it showed the excellent conformality in nanoscale contact holes as well as on Si nanowires. Meanwhile, the Ni ALD was applied to area-selective ALD using octadecyltrichlorosilane (OTS) self-assembled monolayer as a blocking layer. Due to the differences of the nucleation on OTS modified surfaces toward ALD reaction, ALD Ni films were selectively deposited on un-coated OTS region, producing 3 ${\mu}m$-width Ni line patterns without expensive patterning process.

• 한국진공학회지
• /
• 제19권2호
• /
• pp.91-95
• /
• 2010

상온에서 고품질의 $TiO_2$ 박막을 제조하기 위하여 titanium isopropoxide [Ti(OCH$(CH_3)_2)_4$, TIP]와 $H_2O$을 이용한 자외선 활성화 원자층 증착(UV-enhanced atomic layer deposition: UV-ALD) 기술을 개발하였다. UV-ALD 기술은 상온에서 자체제어 표면 반응(self-limitting surface reaction)을 통해 균일하고 고품위 등방 특성을 갖는 순수한 $TiO_2$ 박막 증착이 가능하였다. ALD 반응 시 조사되는 자외선은 Si 기질 위에 우수한 접착력을 가지는 고품질의 $TiO_2$ 박막을 얻는데 효과적이었다. UV-ALD 기술은 높은 단차비(aspect ratio)를 가지는 trench 기질 위에 균일한 $TiO_2$ 박막을 증착하는 데에 적용되었다.