• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.11
• /
• pp.9-16
• /
• 2005

This paper proposes a programmable PLL (phase locked loop) based clock generator supporting a wide-range-frequency input and output for high performance and low power SoC with multiple clock frequencies domains. The propose system reduces the locking time and obtains a wide range operation frequency by using a dual-charge pumps scheme. For low power operation of a chip, the locking processing circuits of the proposed PLL doesn't be working in the standby mode but the locking data are retained by the DAC. Also, a tracking ADC is designed for the fast relocking operation after stand-by mode exit. The programmable output frequency selection's circuit are designed for supporting a optimized DFS operation according to job tasks. The proposed PLL-based clock system has a relock time range of $0.85{\mu}sec{\sim}1.3{\mu}sec$($24\~26$cycle) with 2.3V power supply, which is fabricated on $0.35{\mu}m$ CMOS Process. At power-down mode, PLL power saves more than $95\%$ of locking mode. Also, the PLL using programmable divider has a wide locking range ($81MHz\~556MHz$) for various clock domains on a multiple IPs system.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.212-215
• /
• 2000

This paper introduces to design analog circuits with Verilog-A. It is a tool for design and simulation of analog ICs in behavioral level. Verilog-A has been already established standard and used to IP development in USA. We have proved the possibility of Verilog-A by comparing with measurement data of a fabricated 235MHz PLL circuit. This paper also describes another advantage of Verilog-A.

• Journal of information and communication convergence engineering
• /
• v.3 no.1
• /
• pp.18-22
• /
• 2005

This paper presents the analog adaptive phase-locked loop (PLL) architecture with a new adaptive bandwidth controller to reduce locking time and minimize jitter in PLL output for wireless communication. It adaptively controls the loop bandwidth according to the locking status. When the phase error is large, the PLL increases the loop bandwidth and reduces locking time. When the phase error is small, the PLL decreases the loop bandwidth and minimizes output jitters. The adaptive bandwidth control is implemented by controlling charge pump current depending on the locking status. A 1.28-GHz CMOS phase-locked loop with adaptive bandwidth control is designed with 0.35 $mu$m CMOS technology. It is simulated by HSPICE and achieves the primary reference sidebands at the output of the VCO are approximately -80dBc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.893-899
• /
• 2008

Behavioral level simulations of LDO voltage regulator and phase locked loop(PLL) are performed with CPPSIM, a behavioral-level simulation tool based on C language. The validity of the simulation tool is examined by modeling analog circuits and simulating the circuits. In addition, the designed PLL adopted digital architecture to possess advantages of digital circuits.

• ETRI Journal
• /
• v.30 no.4
• /
• pp.546-554
• /
• 2008

Phase-locked loops (PLLs) are among the most important mixed-signal building blocks of modern communication and control circuits, where they are used for frequency and phase synchronization, modulation, and demodulation as well as frequency synthesis. The growing popularity of PLLs has increased the need to test these devices during prototyping and production. The problem of distinguishing and classifying the responses of analog integrated circuits containing catastrophic faults has aroused recent interest. This is because most analog and mixed signal circuits are tested by their functionality, which is both time consuming and expensive. The problem is made more difficult when parametric variations are taken into account. Hence, statistical methods and techniques can be employed to automate fault classification. As a possible solution, we use the back propagation neural network (BPNN) to classify the faults in the designed charge-pump PLL. In order to classify the faults, the BPNN was trained with various training algorithms and their performance for the test structure was analyzed. The proposed method of fault classification gave fault coverage of 99.58%.

• Information and Communications Magazine
• /
• v.28 no.11
• /
• pp.9-15
• /
• 2011

CMOS 집적회로기술의 발달로 인해 디지털회로는 속도향상 소모전력 감소로 성능이 매우 많이 향상되었지만, Analog/RF 회로는 동작전압감소, 공정변화심화 등으로 인해 심각한 성능저하가 나타나고 있다. 이에 기존의 전하펌프 기반 아날로그 PLL에 대한 대안으로 All Digital PLL(ADPLL)이 개발되고 이미 상용제품에 적용되고 있다. 하지만 그 성능은 데이터변환 회로인 TDC와 DCO의 제한된 해상도로 인해 개선이 많이 필요하다. 이 두 회로는 ADPLL의 성능에 가장 큰 영향을 미치므로 본 논문에서는 지금까지 발표된 TDC와 DCO 구현사례를 중심으로 ADPLL의 연구개발동향을 살펴보고자 한다.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1233-1236
• /
• 2003

This paper proposes a phase-locked loop (PLL) that achieves one-cycle lock acquisition by employing the lock-acquisition circuit (LAC). The LAC produces the initial analog voltage ( v$_{c}$ ) that corresponds to the input frequency. When the transfer curve of the LAC matches that of the voltage-controlled oscillator (VCO), one-cycle locking can be possible. By HSPICE simulations, the proposed LAC is proved to be applicable to any kinds of PLL [1][2][3].].

• Journal of the Korea Society of Computer and Information
• /
• v.7 no.4
• /
• pp.115-120
• /
• 2002

This paper presents the implementation of IS-95 CDMA signal processor, baseband and Intermediate Frequency(IF) digital converter using Field Programmable Gate Array(FPGA) and ADC/DAC and frequency up/down converter IS-95 CDMA channel processor is generated the pilot channel signal with short PN code and Walsh-code generator. The digital If is composed of FPGA. digital transmit/receive signal processor and high speed analog-to-digital converter(ADC) and digital-to-analog converter(DAC). The frequency up/down converter consisted of filter, mixer, digital attenuator and PLL is analog conversion between intermediate frequency(IF) and baseband. This implemented system can be deployed in the IS-95 CDMA base station device etc.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.5
• /
• pp.1-9
• /
• 2012

In this paper, we presents the modeling and implementation of the DDS(Direct Digital synthesizer) driven offset PLL(Pghase Locked Loop) with DAC(Digital Analog Converter) for coarse tune. The PLL synthesizer was designed for minimizing the size and offset frequency and DDS technique was used for ultra low noise and fast lock up time, also DAC was used for coarse tune. The output phase noise was analyzed by superposition theory with the phase noise transfer function and noise source modeling. the phase noise prediction was evaluated by comparing with the measured data. The designed synthesizer has ultra fast lock time within 6 usec and ultra low phase noise performance of -120 dBc/Hz at 10KHz offset frequency.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.653-654
• /
• 2006

A Pre-emphasis transmitter for DRAM bus system has achieved 3.2Gbps/pin operation at 1.8V supply voltage with 0.18um CMOS process. The transmitter has 800MHz PLL to generate 4 phase clocks. The 4 phase clocks are used for input clock of PRBS and multiplexing. One tap pre-emphasis is used to reduce inter symbol interference (ISI) caused by channel low pass effects. The analog calibration makes the optimized driver impedance independent with the PVT variation.