• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.7
• /
• pp.513-518
• /
• 2016

The piezoelectric actuating device is known for its large power density and simple structure. It can generate a larger force than a conventional actuator and has also wide bandwidth with fast response in a compact size. To control the piezoelectric actuator, we need an analog signal conditioning circuit as well as digital microcontrollers. Conventional microcontrollers are not equipped with an analog part and need digital-to-analog converters, which makes the system bulky compared with the small size of piezoelectric devices. To overcome these weaknesses, we are developing a single-chip controller that can handle analog and digital signals simultaneously using mixed-signal FPGA technology. This gives more flexibility than traditional fixed-function microcontrollers, and the control speed can be increased greatly due to the parallel processing characteristics of the FPGA. In this paper, we developed a floating-point multiplier, PWM generator, 80-kHz power control loop, and 1-kHz position feedback control loop using a single mixed-signal FPGA. It takes only 50 ns for single floating-point multiplication. The PWM generator gives two outputs to control the charging and discharging of the high-voltage output capacitor. Through experimentation and simulation, it is demonstrated that the designed control loops work properly in a real environment.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.401-404
• /
• 2009

A simple analytical expression for a current gain of IGBT is derived in terms of the device parameters as well as a gate length dependent parameter, which allows for the determination of the current components of the device as a function of its gate length. The analytical results are compared with those from simulation results. A good agreement is found.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.280-284
• /
• 2000

The simple imcroprocessor device was provided for the control of dissolved oxygen(DO) level. The DO analog signal output from fementer was used as a measurement variable and the agitation speed of fermenter was used as a manipulatio variable. Agitation speed was manipulated to maintain DO level above 10% of saturation condition during cell growth period with microprocessor. Since the experimental resultsshowed that the DO level was maintained above 10% and agitation speed was inverse proportional to DO level ithis simple control device can be used for the DO control of fermenter.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.910-913
• /
• 2002

We have achieved an improved stability of an analog electro-optic effect in FLC/polymer composite films. The optimization of device depends on both the composition of the FLC/polymer mixture and the energy of UV irradiation. This device exhibits continuous gray scales and the mechanical stability against external forces.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2000.10a
• /
• pp.638-641
• /
• 2000

The conventional motor in a crane has a tan generator to feed back the number of turns. The tan generator is contacted to a motor shaft through the coupling. Don has been often generated because the coupling has worn out while the motor is turning. In this paper, we design the speed-measurement device of motor in a un. The device is composed of PIC16F84 controller, photo-sensor, and analog-to digital converter. The photo sensor measures the turn of a motor without contact so the device decreases the probability of errors. And The device can acknowledge the turn direction of the motor with a gin81e senor and two color reflectors.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1028-1033
• /
• 2020

The existing in-band interference reduction method recommends the physical separation distance between wireless devices and interference signals, and the interference can be suppressed through the separation distance. If the in-band interference signals can be reduced in a wireless device, a margin can be given to the physical separation distance. Since there is an effect of extending the receiver dynamic range of receivers, it is highly useful for interference reduction and improvement method. In this paper, the structure of an in-band analog IRM(Interference Reduction Module) is proposed and the design and implementation of the proposed analog IRM are described. To design an analog IRM, the interference reduction performance according to the delay mismatch, phase error and the number of delay lines that affect the performance of the analog IRM was simulated. The proposed analog IRM composed of 16 delay lines was implemented and the implemented IRM has the interference reduction performance of about 10dB for a 5G(NR-FR1-TM-1.1) signal having a 40MHz bandwidth at a center frequency of 3.32GHz. The analog IRM proposed in this paper can be used as an in-band interference canceller.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.387-392
• /
• 2010

This study was performed to design and to construct a digital soil cone index(CI) measuring device replacing conventional analog type devices. The device developed in the study consisted of a load cell, a rotary encoder and a motor with a decelerator as its main parts. The cone speed was controlled lower than 3.0 m/s which keeps the standard suggested by the ASABE S313.3 specification. The experiment was conducted in a soil bin system as well as in various fields. The CI data measured by the developed device were compared with those by an existing measurement device(SC900, Spectrum, USA). Based on the experiments at various field conditions, the CI measuring characteristic of the device was quite similar to that of the conventional device within a acceptable $R^2$ range of more than 0.5(mean=0.76). It was concluded that the digital cone index measuring device was an effective and comprehensive sensor for measuring soil strength.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.174-179
• /
• 2017

We designed the CMOS analog integrate and fire (I&F) neuron circuit for driving memristor based on resistive-switching random access memory (RRAM). And we fabricated the RRAM device that have $HfO_2$ switching layer using atomic layer deposition (ALD). The RRAM device has gradual set and reset characteristics. By spice modeling of the synaptic device, we performed circuit simulation of synaptic device and CMOS neuron circuit. The neuron circuit consists of a current mirror for spatial integration, a capacitor for temporal integration, two inverters for pulse generation, a refractory part, and finally a feedback part for learning of the RRAM. We emulated the spike-timing-dependent-plasticity (STDP) characteristic that is performed automatically by pre-synaptic pulse and feedback signal of the neuron circuit. By STDP characteristics, the synaptic weight, conductance of the RRAM, is changed without additional control circuit.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.1024-1030
• /
• 2015

Safety and security system have been internationally enhanced in a field of shipping logistics. Accordingly, techniques for safety and security have been studied steadily. The need of portable radiation detection device is increasing by the search of the container is enhanced. In this paper, we propose a study to improve the life of the system and the realization of portable radiation detection device based on Cortex-A9. Configuration of a portable radiation detection device is configured largely to an analog board and the digital platform and the sensor module. The power used in each stage of the analog board is varied. Uses a switching regulator to use various power supply thereby to generate an error result and cause the switching noise. It is proposed to reduce the power consumption reducing technique for the study.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.2 s.95
• /
• pp.239-247
• /
• 2005

This paper deals with the development of a contact-type counting device using a piezoelectric polymer film as a sensor. The piezoelectric and vibration characteristics of the film under a bending vibration were investigated theoretically and experimentally. A counting device, which includes filters, an amplifier, an analog-digital converter, and a display, was designed and fabricated. The performance of the piezoelectric polymer sensor was evaluated in the sense of the responses to contact force, contact frequency, and contact speed. The life and the temperature effect were also investigated for the piezoelectric film sensor.