• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.347-356
• /
• 2018

Genetically modified (GM) crops have been increased continuously over the world and concerns about the potential risks of GM crops have also been increasing. Even though GM crops have not been cultivated commercially in Korea, it should be necessary to develop the safety assesment technology for GM crops. In this study, we investigated the influence of heading date difference on gene flow from GM to non-GM rice. In the experimental plot design, The PAC GM rice was placed in the center as a pollen donor and non-GM rice were placed in eight directions as pollen receivers. Five pollen receiver rice cultivars were Unkawng, Daebo, Saegyejinmi, Nakdong-byeo, and Ilmi which had different flowering times. A total of 266,436, 300,237, 305,223, 273,373, and 290,759 seeds were collected from Unkawng, Daebo, Saegyejinmi, Nakdong, and Ilmi, respectively, which were planted around PAC GM rice. The GM${\times}$non-GM hybrids were detected by repeated spraying of herbicide and PAT immunostrip assay. Finally, the hybrids were confirmed by PCR analysis using PAC gene specific primer. The hybrids were found in Nakdong-byeo which had the same heading date with PAC GM rice. The hybridization rate was 0.0007% at Nakdong-byeo plot. All of GM${\times}$non-GM hybrids were located within 2 m distance from the PAC GM rice zone. The physiological elements including rice heading date were found to be important factors to determine GM?rice out crossing rate with GM rice. Consideration should be taken into for many factors like the physiological elements of field heading date of rice cultivars to set up the safety management guideline for prevention of GM rice gene flow.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.3
• /
• pp.1-13
• /
• 2020

Objective : The purpose of this study is to present an analysis model in developing an inclusive response for safety hazards and disaster preventive information system for vulnerable people to the disaster including persons with disabilities, and those with specific needs. Methods : In this study, the persona analysis method is used to analyze fictitious characters that correspond to various characteristics such as age, disability, environment, occupation, etc. in terms of the scenario of some particular disaster subjects. Based on the user's communication problems derived from the persona analysis, focused group interview and ICF based analysis were implemented to identify needs and arbitration methods. Results : The needs from persona analysis and ICF-based communication items analysis identifies the factors that make each fictitious character difficult in terms of communication in obtaining the benefits consistent with the purpose of the service. The study derives service requirements that can provide arbitration or facilitation methods to increase communication ability of the users. Conclusion : Through the persona analysis method, difficulties that could occur when receiving disaster information using communication devices were identified and analyzed in conjunction with communication problems described in the ICF. In building information services for the prevention of safety hazards and disasters, this study presented a model that uses the persona analysis method and the ICF classification system to derive user requirements for accessible information system.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.382-389
• /
• 2020

Soil properties in opencast mines are a key factor in reclamation (revegetation) of mining areas. In this study we determined the soil physical and chemical properties of kaolinite tailings, reclaimed areas, and adjacent natural red pine (Pinus densiflora S. et Z.) forests in kaolinite opencast mines in Sancheong-gun, Gyeongsangnam-do. Six sites were chosen for collection of soil samples to determine soil physical and chemical properties at a soil depth of 10 cm. Soil bulk density was significantly higher (P < 0.05) in the kaolinite tailings (1.51 g·cm-3) than in the reclaimed areas (1.19 g·cm-3) and red pine forests (0.93 g·cm-3), whereas air phase in the kaolinite tailings (14.2%) was significantly lower than in the red pine forests (32.6%). Clay content in the red pine forests was significantly higher than in the reclaimed areas (18.7%) or kaolinite tailings (14.8%), whereas soil structural stability index was significantly lower in the reclaimed areas (1.61%) and kaolinite tailings (0.87%) than in the red pine forests (7.75%). Soil pH was significantly higher in the kaolinite tailings (pH 6.68) and reclaimed areas (pH 6.27) than in the red pine forests (pH 5.31). Soil organic carbon and total nitrogen were significantly higher in the red pine forests (C: 36.03 mg·g-1; N: 2.08 mg·g-1) than in the reclaimed areas (C: 5.00 mg·g-1; N: 0.31 mg·g-1) than in the kaolinite tailings (C: 2.12 mg·g-1; N: 0.07 mg g-1). The amount of available phosphorus was not significantly different among the three treatments. The concentration of exchangeable potassium was significantly lower in the kaolinite tailings (0.08 cmolc·kg-1) than in the reclaimed areas (0.21 cmolc·kg-1) and red pine forests (0.30 cmolc·kg-1). These results indicate that, because of high soil bulk density and low soil organic carbon, total nitrogen, available phosphorus, and exchangeable potassium in kaolinite tailings and reclaimed mining areas, soil nutrient management is needed in order to reclaim the vegetation in these type of areas.

• Journal of Nutrition and Health
• /
• v.54 no.1
• /
• pp.39-53
• /
• 2021

Purpose: This study examined the dietary behavior, health status and nutrient intake by considering the level of household income of elderly people using data obtained from the Korea National Health and Nutrition Survey (KNHANES VII) 2018. Methods: The study subjects were 1,355 elderly people over 65 years old (558 men, 797 women). Based on their household income, participants were classified into three groups: low-income, middle-income, and high-income. The variables consisted of general characteristics, dietary behavior, health status, health related behavior, and dietary intakes. Dietary data were estimated by the 24-hour dietary recall. Results: In men, the low-income group encompassed older, less educated, less employed, and living with family of first generation. However, in women, there were no differences in employment by the level of income, and women living alone had lower income than subjects living with family. Elderly men in the high-income group had a significantly higher level of nutrient intake (energy, protein, fat, phosphorous, riboflavin, niacin and vitamin C). Men in the low-income group consumed a significantly lower intake of fruits, seaweeds and eggs, including total food. Women in the low-income group had significantly less intake of protein, fat, calcium, phosphorous, iron, vitamin A, riboflavin, and niacin whereas women in the high-income group had significantly higher intake of sugar & sweet, eggs, and beverages, including total food. Conclusion: These results suggest that the level of household income is an important factor that influences food and nutrient intake in the Korean elderly. The socioeconomic status needs to be considered differently among elderly men and women when implementing food assistant programs and designing nutrition education programs.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.

• Korean Journal of Remote Sensing
• /
• v.38 no.2
• /
• pp.179-188
• /
• 2022

Global warming causes climate change and increases extreme weather events worldwide, and the occurrence of heatwaves and droughts is also increasing in Korea. For the monitoring of extreme weather, various satellite data such as LST (Land Surface Temperature), TCI (Temperature Condition Index), NDVI (Normalized Difference Vegetation Index), VCI (Vegetation Condition Index), and VHI (Vegetation Health Index) have been used. VHI, the combination of TCI and VCI, represents the vegetation stress affected by meteorological factors like precipitation and temperature and is frequently used to assess droughts under climate change. TCI and VCI require historical reference values for the LST and NDVI for each date and location. So, it is complicated to produce the VHI from the recent satellite GK2A (Geostationary Korea Multi-Purpose Satellite-2A). This study examined the retrieval of VHI using GK2A AMI (Advanced Meteorological Imager) by referencing the historical data from VIIRS (Visible Infrared Imaging Radiometer Suite) NDVI and LST as a proxy data. We found a close relationship between GK2A and VIIRS data needed for the retrieval of VHI. We produced the TCI, VCI, and VHI for GK2A during 2020-2021 at intervals of 8 days and carried out the interpretations of recent extreme weather events in Korea. GK2A VHI could express the changes in vegetation stress in 2020 due to various extreme weather events such as heatwaves (in March and June) and low temperatures (in April and July), and heavy rainfall (in August), while NOAA (National Oceanic and Atmospheric Administration) VHI could not well represent such characteristics. The GK2A VHI presented in this study can be utilized to monitor the vegetation stress due to heatwaves and droughts if the historical reference values of LST and NDVI can be adjusted in a more statistically significant way in the future work.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.6
• /
• pp.69-84
• /
• 2021

As industrial structural changes in the 4th Industrial Revolution have recently led to the need for fostering high-tech industries and high-tech manufacturing industries have been showing high value-added creation, the importance of high-tech manufacturing ventures has increased a lot as well. As a result of this, the government is actively supporting and fostering them. However, it appears that high-tech manufacturing ventures seem to have a lot of difficulty in securing competitive advantages due to the lack of internal core competencies and experience in the rapidly changing international economic conditions. In order for high-tech manufacturing ventures to strengthen internal core competencies, external collaborations with other companies or institutions which have diverse experience, technology skills and abundant resources are actively promoted. Accordingly, based on resource-based theory and transaction cost theory, the authors analyzed the effects of the high-tech manufacturing ventures'external collaborations on internal core competencies and management performance in this study. In order to verify the hypothesis of this study, the 2020 data on"The Research on the Precision Status of Ventures'compiled by the Ministry of SMEs and Startups since 1999 were utilized. According to the results of this study, the experience of external collaborations had a positive impact on the internal core competencies and non-financial management performance, while there was no direct impact on financial management performance. Moreover, the relationship between the experience of external collaborations and management performance is mediated by the internal core competencies. Additionally, it was found that the internal core competencies positively affected both non-financial and financial management performances, and non-financial management performance again had a significant impact on the financial management performance. Finally, the experience of external collaborations had a positive impact on both development, manufacturing, and marketing factors forming the internal core competencies. However, the impacts of individual factors were different in the management performance. Development and marketing factors were shown to have a significant impact on both non-financial and financial management performance, while the manufacturing factor had a significant impact only on financial management performance.

• Journal of the Society of Disaster Information
• /
• v.18 no.2
• /
• pp.280-289
• /
• 2022

Purpose: In this study, the characteristics of fire occurrence according to ignition heat sources such as operating equipment, cigarette/lighter fire, and flame/fire were analyzed. Method: One-way ANOVA and cross-analysis were used to analyze the characteristics of fire occurrence by verifying the difference between the ignition environment, fire damage status and scale, and cause of ignition according to the ignition heat source. Result: The fire occurrence characteristics were analyzed through As a result of the analysis, it was found that fires caused by operating devices occurred more frequently on weekdays than other ignition heat sources, and the number of victims and the number of victims were the highest, so mobilization of firefighting power and property damage were the greatest. The initial ignition was generated by electric and electronic devices, and the combustion was expanded by the synthetic resin. For fires caused by cigarette and lighter fires, the most fires occurred on Saturdays and Sundays, and the mobilization of the police force was more characteristic than the mobilization of the firefighting force. In particular, it was found that the initial ignition and combustion expansion were caused by paper, wood, and hay. Fires caused by sparks and sparks occurred most frequently on Saturdays and Sundays, and initial ignition and combustion expansion were found to be caused by paper, wood, and hay. In particular, it showed the characteristic that it occurred in the place farthest from the fire station. The common characteristic of all ignition heat sources was that the fire occurred most frequently in the afternoon time, and the fire type was predominantly the building structure fire, and only the ignition point was burned the most. Conclusion: In order to prevent fire and minimize damage, it is necessary to analyze the tendency of fire occurrence and to prepare appropriate preparations according to the fire occurrence factors. In order to analyze the characteristics of fire occurrence using public data in the future, it is necessary to standardize disaster data and to open and activate data.

• Journal of The Korean Association For Science Education
• /
• v.42 no.4
• /
• pp.397-415
• /
• 2022

As the global warming problem becomes serious, the need for carbon cycle education in school is increasing. Adopting systems thinking ability is needed to understand the carbon cycle systematically. Furthermore, under the rapid change of environment, society, and economy, systems thinking ability is being emphasized as it can strengthen the competencies of students who will be leading the future society. The purposes of this study are as follows: first, is developing the systems thinking instrument for the carbon cycle and the rubric for analysis of systems thinking instrument. The second is analyzing the systems thinking ability of students using the developed instrument and rubric. In order to perform this study, previous studies related to the carbon cycle and systems thinking education were analyzed. Based on the analysis results, the systems thinking instrument for the carbon cycle and rubric were developed. The systems thinking ability was analyzed by implementing the developed instrument and rubric to 172 high school and university students. The results of this study are as follows: first, the systems thinking instrument for the carbon cycle was developed, and a rubric utilization guide was constructed. The instrument and rubric were modified through pilot study for middle school students producing expert opinion in relation to systems thinking and carbon cycle. Second, the systems thinking ability of students was analyzed. Consequently, students had systems thinking ability fully at a low level, such as identifying the variables related to the carbon cycle. However, it was shown that they lacked the systems thinking ability at a high level, such as time delay and feedback processes. The importance of the carbon cycle has been increasing since the global warming is the most pressing issue and significant environmental problem facing us today. Application of the systems thinking ability can contribute to understanding these complex problems and finding fundamental solutions.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.28-36
• /
• 2020

Sustainable appropriate technology requires user-centered design with consideration of the political, cultural and environmental aspects of the area. However, in the preparation of appropriate technology, there is a limit to the prior grasp of the user's intention and experience leading to the actual behavior of the user after the dissemination. As a result, appropriate technologies are often inconvenient for practical use or used for other purposes, contrary to the designer's intention. This study analyzes the case of appropriate technology with an analysis framework that reflects Maier's affordance theory, and proposes a design solution that can overcome the limitations of existing design. Affordance theory is the theory of factors that cause the user to identify and use features through interpretation based on prior knowledge and experience about things. The analysis cases in this study are the interviews with the designers, management education materials, and manager interviews for water purification systems at three of six schools in Binh Dinh Province, Vietnam, from August 2015 to January 2018. The case was attempted to be improved by periodic installation, maintenance, and inspection, but similar problems continued to occur. First, the facility inspections and manager interviews are compared with manager training materials distributed at the time of installation to find inconsistencies. Next, we analyze the designer's intended affordance and the affordances that actually influenced the management behavior. And then, we propose design solutions based on commonly found problems and affordances. This study suggests that it is necessary to apply the design considering the user's behavior before distributing the appropriate technology, and this study will be precedent in the process of finding the improvement through the analysis framework based on the affordance.