• Journal of Convergence for Information Technology
• /
• v.9 no.5
• /
• pp.117-124
• /
• 2019

This paper discusses recent trends in the fabrication of semiconducting materials among the components of thin film transistors used in AMOLED display. In order to obtain a good semiconductor film, it is necessary to change the amorphous silicon into polycrystalline silicon. There are two ways to use laser and heat. Laser-based methods include sequential lateral solidification (SLS), excimer laser annealing (ELA), and thin-beam directional crystallization (TDX). Solid phase crystallization (SPC), super grain silicon (SGS), metal induced crystallization (MIC) and field aided lateral crystallization (FALC) were crystallized using heat. We will also study research for manufacturing large AMOLED displays.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.595-602
• /
• 2005

Ionic liquids (ILs) are the ionic salts pertaining to liquid-state at lower temperature than $100^{\circ}C$. ILs have attracted attention as new media because of their peculiar chemical, physical or electrical properties such as low volatility, nonflammability, liquid-phase stability at high temperature, high ability in solvating organic, inorganic or polymeric materials, and high ionic conductivity. Since the properties can be modified by assembling the pair using various anions and cations, ILs are often called designer solvents. In addition, ILs have been expected as new green media to replace the volatile organic solvents, which have been widely used in chemical, energy, material, and electronic industries, as well as to enhance the reaction activity and selectivity. In this review paper, the structures, properties, applications, and technology trend of ILS are introduced.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.66-72
• /
• 2008

Manganese hydrogen phosphate hydrate, $MnHPO_4{\cdot}2.25H_2O$, is a major constituent of the pre-conditioning compositions for the manganese phosphate coating treatment over carbon steel substrate. This compound is conventionally produced by the synthesis in the aqueous solution process followed by the filtration and drying processes and a series of size reduction and classification processes in dry state. However, it is evident that the conventional process is neither environment-friendly nor cost-effective. In this work, a new process principle was examined based on the controlled double-jet precipitation technology to produce the manganese chemical product of fairly uniform particle size distribution in an aqueous solution media. The effects of stabilizing agents were comparatively studied by the scanning electron microscope analysis in a uniformity point of view of the resulting particle size. Polyvinylpyrrolidone and Gum Arabic were excellent in controlling the crystal growth step, resulting in fairly uniform size distributions of the particles from the controlled double-jet process.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.433-441
• /
• 2004

국내 발파 현장에서 사용되고 있는 폭약류에 강력한 폭굉력을 충분하게 발휘하기 위해서는 뇌관(Blasting cap, Detonator)의 역할이 중요하다. 그리고 이 뇌관의 정밀성에 따라 발파 효율의 차이가 있게된다. 초기의 도화선 및 공업뇌관에서 시작하여 현재 정밀성 면에서는 MS(Milli Second)뇌관의 경우 20ms또는 25ms의 정밀한 시차로 순차적으로 기폭함으로써 발파효과의 극대화와 소음 및 진동제어에 큰 효과를 이루었으나, 최근 개발된 진자뇌관의 경우 자체 IC회로를 내징하여 $1{\sim}2ms$의 초정밀시차(오차범위 $0.1{\sim}0.2ms$이내)의 구현이 가능해짐에 따라 이를 적절히 조합하여 설계함으로써 각종 제어발파, 파쇄도 향상, 암손상영역 저감 등의 효과에 대해 국외에서 연구가 진행되고 있는 것으로 알려지고 있다. 그러나 우리나라와 같이 도심지 발파 및 터널이나 노천 현장 근거리에 보안물건이 위치해 있어 진동제어가 절실히 필요한 상황에서 진동제어에 효과가 있는 것으로 알려진 전자뇌관에 대한 연구가 이루어지고 있지 않은 상황에서 본 연구는 앞으로 이루어질 전사뇌관에 대한 수많은 연구에 기초자료를 제공하고자 실시하였다. 본 연구에서는 이를 위해 국내에서 최초로 2003년 9월 23일 강원도 양구 지역읜 00터널에 전자뇌관을 이용한 시험발파를 실시하였고, 발파에 의한 진동 등을 조사하여 그 효율성을 검토하였다. 이를 위해 전자뇌관의 특성과 장점을 최대한 살리기 위하여 각공을 발파하는 방식, 즉 1지발에 1공을 발파하는 방식을 채택하고 비전기 뇌관과 전자뇌관으로 설계를 하여 각각의 발파효율을 비교하여 보았다. 그 결과 발파신동의 경우 비전기뇌관을 이용하여 1공씩을 1지발로 발파를 한 경우에는 18${\sim}$56%의 진동저감 효과가 있었고, 번 설계에 의해 진해오딘 발파에 비하여는 최대 70% 이상의 진동저감 효과가 있는 것으로 나타났다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.239-239
• /
• 2015

삼성, LG전자 등 다양한 사업부의 White Anodizing구현기술의 Need는 항상 존재하고 있으며, 특히 White와 Black Color의 콤비네이션으로 친환경 이미지 강조 및 핸드폰의 고급화에 필연적인 메탈화로 작년부터 White Anodizing의 수요요청이 쇄도하고 있다. 그러나 현행 공업용 Anodizing 기술(황산법)은 봉공처리 전 착색공정에서 Red, Blue, Black 등 염료분자와 달리 염료 분자가 비교적 큰 White 염료는 Anodizing으로 성장된 다공성피막 내부로 들어가지 못해 국내 Anodizing전문기업 뿐만아니라 일본 기업 및 연구소 등에서도 무수한 시도를 하고 있지만 현재까지는 완벽한 White Anodizing구현기술이 전무한 상태이다. 이에 당사는 알루미늄합금을 White의 안료나 염료가 아닌 알칼리전해액의 Pulse전류인가 PEO(Plasma electrolytic oxidation)처리 공정에 의거 White Anodizing기술을 개발하고자 하였다. 알칼리 전해질에 의한 Anodizing 처리기술로 White와 유사한 색상을 구현하고 있으나, 수요자가 요구하는 White Anodizing으로 제품을 양산하는데 어려움이 있어 기존 Anodizing 처리 대신 Pulse전류인가 PEO처리기술로 White Color를 구현하여 수요요청이 쇄도한 국내외 기업체에 공급하고자 한다. 본 기술은 알카리 전해액을 사용하므로 친환경적이며, 다공성 피막으로 인한 우수한 도장 밀착성, 실링처리에 의한 내식성 향상, PEO 피막의 우수한 경도 및 내마모성 등을 나타내며, 알루미늄뿐만 아니라 마그네슘합금, 티타늄 등에도 공히 적용이 가능하며, White Anodizing의 특화된 기술로 표면처리기술 우위 선점 및 원가절감 등이 가능하다. 당사는 알루미늄 아노다이징 전문 기업으로서 내식성 목적의 연질 아노다이징 처리 및 고내마모성을 목적으로 하는 자동차 부품 및 기계 부품용 경질 아노다이징 처리를 주로 수행하고 있다. 본 발표에서는 당사의 표면처리 기술 및 알루미늄의 아노다이징에 대한 소개를 하고자 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.3
• /
• pp.219-222
• /
• 2019

In this study, we fabricated plate-type shunt resistors with thermal stability by parallelly connecting metal alloy plates with positive temperature coefficient of resistance (TCR) and carbon nanotube (CNT) plates with negative TCR. The metal alloy plates, which were prepared by alloying Cu and Mn with a composition of 91 wt% of Cu and 9 wt% of Mn, showed around $800ppm/^{\circ}C$ of TCR, and the CNT plates prepared from the CNT solution by using the vacuum filtration method showed around $-800ppm/^{\circ}C$ of TCR. The shunt resistor that was fabricated by stacking metal alloy plates and CNT plates in this work showed about $46.93ppm/^{\circ}C$ of TCR. Therefore, we conclude that a shunt resistor with low TCR can be realized by simply adjusting the TCR of the metal alloy only, because the TCR of the CNT plate has an identical value.

• Journal of Engineering Education Research
• /
• v.24 no.4
• /
• pp.61-74
• /
• 2021

The purpose of this study is to provide a direction for domestic engineering education research by analyzing the research trends of JEE(Journal of Engineering Education). The results of analyzing research trends regarding research topics, research objects and research methods are as follows. First, by research topic, 'Diffusion of Educational Innovation' was found to have the highest proportion with 52 articles(21%). Second, by research objects, 'university students' showed the highest proportion with 148 articles(53.6%). Third, by research method (large category), 'quantitative research' had the highest proportion with 132 articles(53.2%). By research method (medium category), 'survey research' had the highest proportion with 129 articles(33.5%). Based on the results of this study, future engineering education research should be conducted to contribute to holistic development through diversification of research topics, methods, and objects.

• Journal of Engineering Education Research
• /
• v.25 no.4
• /
• pp.3-12
• /
• 2022

The purpose of this study is to analyze the educational effects of convergence Capstone Design activities. To this end, it analyzed the difference in engineering design competency before and after completing the curriculum in the Capstone Design process, where students from various majors team up, and analyzed the impact of convergence Capstone Design activities on engineering design competency. A survey study was conducted on experimental participants to collect data on individual characteristics and engineering design competency, and to analyze differences by background variable. As a result of analysis according to background variables, the engineering design competency was improved afterwards than before, except for some competency areas.

• Applied Chemistry for Engineering
• /
• v.25 no.5
• /
• pp.447-454
• /
• 2014

Organic solar cells (OSCs) have intensively studied in recent years due to their advantages such as cost effectiveness and possibility of applications in flexible devices. In spite of the high power conversion efficiency (PCE) of 10 %, the OSCs still have a draw back of their low environmental stability due to the oxidization of aluminum cathode and etching of transparent conducting oxide as electrode. To solve these problems, the inverted structured OSCs (I-OSCs) having greatest potential for achieving an improvement of device performances are suggested. Therefore, there are a lot of studies to develope of interface layer based on organic/inorganic materials for the electron transport layer (ETL) and passivation layer, significant advancements in I-OSCs have driven the development of interface functional materials including electron transport layer. Recent efforts to employing 2D/3D zinc oxide (ZnO) based ETL into I-OSCs have produced OSCs with a power conversion efficiency level that matches the efficiency of ~9 %. In this review, the technical issues and recent progress of ZnO based ETL in I-OSCs to enhancement of device efficiency and stability in terms of materials, process and characterization have summarized.

• Journal of Convergence for Information Technology
• /
• v.11 no.3
• /
• pp.167-173
• /
• 2021

There is an increasing interest in manufacturing various electronic devices on a bendable substrate. In this paper, we observed a surface morphology by annealing for 20 minutes at temperatures of 150 ℃, 350 ℃, and 550 ℃, respectively, with samples coated by chromium and aluminum. Data on surfaces are investigated using high-resolution SEM and AFM that can measure roughness up to nm. There is no difference from the sample without heat treatment up to 350 ℃, but the change of crystal grains can be observed at 550 ℃. In the future, for application to the flexible optoelectronic field, additional characteristics such as electrical conductivity and reflectivity will be analyzed and optical devices will be manufactured. In conclusion, we will explore the possibility of applying metal materials to flexible electronic devices.