• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.1
• /
• pp.76-82
• /
• 2002

This paper presents a quaternary-binary decoder, a quaternary logic current buffer, and a quaternary logic full-adder using current-mode multiple-valued logic CMOS circuits. Proposed full-adder requires only 15 MOSFET, 60.5% and 48.3% decrease of devices are achieved compared with conventional binary CMOS full-adder and Current's full-adder. Therefore, decrease of area and internal nods are achieved. Designed circuits are simulated and verified by HSPICE. Proposed full-adder has 1.5 ns of propagation delay and 0.42㎽ of power consumption. Also, proposed full-adder can easily adapted to binary system by use of encoder, designed decoder and designed current buffer.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.1
• /
• pp.15-22
• /
• 1974

A new ternary full adder using the current controlled negative-resistance circuit is described. The full adder is constructed from the modified-half-adder which was devised by making use of a negative resistance circuit. This full adder makes the number of its gates decrease and makes its own speed increase in comparison with the full adders which had been introduced previously. It is convenient to construct to the integrated circuit because transistor, SBD(Schottky Barrier Diode) and resistors were used as the circuit elements.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.41-48
• /
• 2005

In this paper, we propose a new Low-Swing CVSL full adder for low power consumption. An $8\times8$ parallel multiplier is used for the comparison between the proposed Low-Swing CVSL full adder with conventional CVSL full adder. Comparing the previous works, this circuit is reduced the power consumption rate of $13.1\%$ and the power-delay-product of $14.3\%$. The validity and effectiveness of the proposes circuits are verified through the HSPICE under Hynix $0.35{\mu}m$ standard CMOS process.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.1-9
• /
• 2009

A full adders is an important component in applications of digital signal processors and microprocessors. Thus it is imperative to improve the power dissipation and operating speed for designing a full adder. We propose a new adder with modified version of conventional static CMOS and pass transistor logic. The carry-out generation circuit of the proposed full adder is different from the conventional XOR-XNOR structure. The output Cout of module III is generated from input A, B and Cin directly without passing through module I as in conventional structure. Thus output Cout is faster by reducing operation step. The proposed module III uses the static CMOS logic style, which results full-swing operation and good driving capability. The proposed 1bit full adder has the advantages over the conventional static CMOS, CPL, TGA, TFA, HPSC, 14T, and TSAC logic. The delay time is improved by 4.3% comparing to the best value known. PDP(power delay product) is improved by 9.8% comparing to the best value. Simulation has been carried out using a $0.18{\mu}m$ CMOS design rule for simulation purposes. The physical design has been verified using HSPICE.

• Journal of IKEEE
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2008

With the recent development of portable system such as mobile communication and multimedia. Full adders are important components in applications such as digital signal processors and microprocessors. Thus It is important to improve the power dissipation and operating speed for designing a full adder. We propose a new adder with modified version of conventional Ratioed logic and Pass Transistor logic. The proposed adder has the advantages over the conventional CMOS, TGA, 14T logic. The delay time is improved by 13% comparing to the average value and PDP(Power Delay Product) is improved by 9% comparing to the average value. Layouts have been carried out using a 0.18um CMOS design rule for evaluation purposes. The physical design has been evaluated using HSPICE.

• Journal of IKEEE
• /
• v.11 no.2
• /
• pp.83-88
• /
• 2007

This paper proposes an 8${\times}$8 bit parallel multiplier using MOS current-mode logic (MCML) circuit for low power consumption. The 8${\times}$8 multiplier is designed with proposed MCML full adders and conventional full adders. The designed multiplier is achieved to reduce the power consumption by 9.4% and the power-delay-product by 11.7% compared with the conventional circuit. This circuit is designed with Samsung 0.35${\mu}m$ standard CMOS process. The validity and effectiveness are verified through the HSPICE simulation.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.3
• /
• pp.40-46
• /
• 2001

In this paper, a novel low power full adder circuit comprising only 10 transistors is proposed. The circuit is based on the six -transistor CMOS XOR circuit, which generates both XOR and XNOR signals and pass transistors. This adder circuit provides a good low power characteristics due to the smaller number of transistors and the elimination of short circuit current paths. Layouts have been carried out using a 0.65 ${\mu}m$ ASIC design rule for evaluation purposes. The physical design has been evaluated using HSPICE at 25MHz to 50MHz. The proposed circuit has been used to build 2bit and 8bit ripple carry adders, which are used for evaluation of power consumption, time delay and rise and fall time. The proposed circuit shows substantially improved power consumption characteristics, about 70% lower than transmission gate full adder (TFA), and 60% lower than a design using 14 transistors (TR14). Delay and signal rise and fall time are also far shorter than other conventional designs such as TFA and TR14.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.3
• /
• pp.22-28
• /
• 1972

A new full-adder is proposed and it's operation-characteristic is described. The circuit proposed here was improved in operational stability and cicuit-configuration. The circuit is composed of a tunnel diode, Schottky-barrier diodes. The circuit design and it's opration is explained by considering the change of the load line when the input current is applied. The explanations are proved by experimental details.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.65-72
• /
• 2013

This paper presents design methodology for Memristor-CMOS circuits and its application to primitive IPs design. We proposed a Memristor model and designed basic elements, Memristor AND/OR gates. The primitive IPs based on a Memristor-CMOS technology is proposed for a Memristive system design. The netlists of IPs are extracted from the layouts of Memristor-CMOS and is verified with SPICE-like Memristor model under $0.18{\mu}m$ CMOS technology. As a result, an example design Memristor-CMOS full adder has only 47.6 % of silicon area compare to the CMOS full-adder.

• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.147-150
• /
• 2007

This paper describes a new low-swing inverter for low power consumption. To reduce a power consumption, an output voltage swing is in the range from 0 to VDD-2VTH. This can be done by the inverter structure that allow a full swing or a swing on its input terminal without leakage current. Using this low-swing voltage technology, we proposed a low-power 16$\times$16 bit parallel multiplier. The proposed circuits are designed with Samsung 0.35$\mu$m standard CMOS process at a 3.3V supply voltage. The validity and effectiveness are verified through the HSPICE simulation.. Compared to the previous works, this circuit can reduce the power consumption rate of 17.3% and the power-delay product of 16.5%.