• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.772-777
• /
• 2016

Activity of the noncontacted low temperature atmospheric pressure surface discharged plasma (LASDP) converts stable gas to ionized gas known as discharge or plasma. This ionized gas exhibits the antimicrobial activity. We examined the effects of 3 different storage treatments for 80 days on 'Setoka' : ambient storage (AS), low-tempperature storage (LTS), and low-temperature atmospheric pressure plasma+low-tempperature storage (PLTS). Total soluble solids showed no the significant differences between the 3 treatments. Acidity gradually decreased, and was 0.5% under AS after 30 days of storage. Fruit firmness increased by a few percent until 40 days of storage. Weight loss in AS was higher than for other treatments. After 80 days of storage, the decay ratio was significantly low in PLTS treatment: (AS, 50.5%; LTS, 5.6%; PLTS, 1.9%). In AS treatment, 73% of the rotten fruits were infected particularly with green and blue mold; however, only 1% of the rotten fruits were infected in case of PLTS treatment. In conclusion, LASDP treatment can prevent postharvest decay caused by fungi and is an efficacious alternative extending the shelf-life of citrus fruits.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.107-108
• /
• 2013

플라스틱 기판 표면을 플라즈마 처리시 형성되는 수산화기에 실란화합물을 반응시키면 상온에서도 플라스틱 표면에 다양한 유기기를 도입할 수 있다. 아민기와 에폭시기가 상온에서도 강력한 화학결합을 이루는 원리를 이용하여, 유기기로써 아미노기와 에폭시기를 갖는 두 실란화합물을 선정, 두 고분자 기판에 각각 도입 후 접합시킨 결과, 저온 및 대기압 조건에서도 강력한 본딩을 이루는 것을 확인할 수 있었다.

• Journal of the Korean Vacuum Society
• /
• v.22 no.2
• /
• pp.55-65
• /
• 2013

Sterilization of Neurospora crassa has been investigated in this research by using a surface air plasma with dielectric barrier discharged (DBD) structure under atmospheric pressure. The sinusoidal alternating current has been used in this experiment with discharge voltage of 1.4~2.3 kV. The phase difference between the voltage and current signals are found to be almost 80 degree due to the capacitive property of dielectric barrier. Temperature on the biomaterials has been minimized by radiating the heat with the air cooling system. It is noted that the substrate temperature remains under 37 degree for plasma exposure time of 10 minutes with operation of cooler system. It is found that the ozone, $O_3$, has been measured to be about 25~30 ppm within 1 cm region and to be about 5 ppm at the 150 cm downstream region away from the suface plasma. It is also noted that the nitric oxide, NO, and nitric dioxide, $NO_2$, are not nearly detected. Germination rate and mitochodrial activity of Neurospora crassa immersed in the deionized water have been found to be drastically decreased as the plasma treatment time and its electrical power are increased in this experiment. Here, the mitochondrial activity has been analyzed by MTT (3-(4,5-dimethy lthiazol-2yl)-2,5-diphenyl-2H-tetrazolium bromide) assay. However, sterilization of Neurospora crassa immersed in the Vogel's minimal media has been found to be low by plasma treatment, which is caused by surrounding background solution. This research shows the sterilization possibility of Neurospora crassa by using the noncontated surface DBD plasma, which is different from the plasma jet. This is mainly attibuted to the reactive species generated by the surface plasma, since they play a major role for inhibition of micobes such as Neurospora crassa.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.165-171
• /
• 2018

Atmospheric-pressure plasma (APP) was applied to determine quality characteristics of brown rice (BR) and white rice (WR) of Samkwang and Palbangmi. APP (250 W, 15 kHz, ambient air) was generated and dielectric barrier discharge was applied for 0, 10, and 20 min for 2 weeks at 4 and $25^{\circ}C$. The growth of total aerobic bacteria and mold increased depending on the storage. Water content of BR and WR decreased by storage temperature and periods. No viable counts were detected for molds by APP-treated 20 min at $4^{\circ}C$. Changes in protein and damaged starch contents in plasma were not observed. Amylose contents were not changed, but WR (Palbangmi) showed a tendency to increase. The results show that APP improved the microbial quality of BR and WR of Samkwang and Palbangmi, although further studies should be conducted to determine change in quality by APP.

• Proceedings of the Korean Fiber Society Conference
• /
• 2002.04a
• /
• pp.293-296
• /
• 2002

소수성인 폴리올레핀계를 친수성화하여 고분자의 표면특성을 개량하거나 고분자 재료 표면에 새로운 기능을 부여하고자 하는 연구가 1970년대부터 계속되고 있다. 이러한 고분자의 표면 특성개질에 대한 연구는 보통 고분자의 도장성, 인쇄성, 접착성, 젖음성 들을 개선하기 위한 것이다. 그 중 재료의 표면층 만을 효율적으로 개질 시키는 저온 플라즈마 처리법은 낮은 기압에서 행하는 글로우 방전법과 대기압 부근에서 행하는 코로나 방전법으로 나눌 수 있으며, 특히 대기압하에서 코로나 방전을 이용한 표면개질법은 산업현장에서 연속적이면서 고속으로 처리할 수 있고 취급이 용이하다는 장점 때문에 표면개질에 있어서 현재 널리 사용되고 있는 방법중 하나이다[1]. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.447-447
• /
• 2010

일찍이 $SiO_2$ (Silicon dioxide) 박막은 다양한 분야에서 유전층, 부식 방지층, passivation층 등의 역할을 해왔다. 그리고 이러한 박막 공정은 대부분 진공의 환경에서 그 공정이 이루어지고 있다. 하지만 이러한 진공 system은 chamber, loadlock 그리고 펌프 등의 다양한 진공장비로 인한 생산 비용 증가, 공정의 복잡성뿐만 아니라 공정의 대면적화에 어려움을 지니고 있다. 그리고 최근 flexible display의 제조 공정에서 polymer 혹은 plastic 기판을 제조 공정에 적용시키기 위해 저온 공정이 필수적으로 요구 되고 있다. 이러한 기술적 한계를 뛰어 넘기 위해 최근 많은 연구가들은 atmospheric pressure plasma enhanced chemical vapor deposition (AP-PECVD)에 대해 지속적으로 다양한 연구를 하고 있다. 본 연구에서는 remote-type의 modified pin-to-plate dielectric barrier discharge (DBD) 시스템을 이용한 $SiO_2$ 무기 박막 증착에 관해 연구하였다. $O_2$/He/Ar의 gas와 5 kV AC power (30 kHz)의 전원장치를 통해 고밀도 대기압 플라즈마를 발생시켰고, silicon precursor로는 hexamethyldisilazane (HMSD)를 사용하였다. 먼저 HMDS와 $O_2$ gas의 flow rate 변화에 따른 증착률을 조사하였고 그 다음으로 박막의 조성 및 표면 특성을 조사하였다. HMDS의 유량이 100 ~ 300 sccm으로 증가함에 따라 증착속도는 증가했다. 하지만 FT-IR을 통해 HMDS의 유량이 증가하면 반응에 참여할 산소 분자의 부족으로 인해 $-(CH_3)_X$의 peak intensity가 증가하고, -OH의 peak intensity가 점차 감소함을 관찰 할 수 있었다. 또한 증착된 박막의 표면에 particle과 불균일한 surface morphology 등을 SEM image를 통해 관찰 하였다. 산소 유량이 탄소와 관련된 많은 불순물들의 제거에 도움이 됨에도 불구하고 14 slm 이상의 산소가 반응기 내로 주입되게 되면 대기압 플라즈마의 discharge가 불안정하게 되어 공정효율을 저하시키는 요소가 되었다. 결과적으로 HMDS (150 sccm)/$O_2$ (14 slm)/He (5 slm)/Ar (3 slm)의 조건에서 약 42.7 nm/min 증착률을 가지며, 불순물이 적고 surface morphology가 깨끗한 $SiO_2$ 박막을 증착할 수 있었다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1802-1806
• /
• 2007

Nowadays, many configurations and applications of small atmospheric plasma source have been investigated with growing interest, as it provides the bacteria inactivation, the surface modification and removal of unwanted small regions, and so on. In this paper, the non-thermal micro plasma source under atmospheric pressure by means of submicrosecond pulse voltage waveforms is suggested. Plasma operates in helium is appears as a small (sub-mm) glow at the tip of a plasma gun. Electrical measurements show that the plasma source operates at low voltage (about 500V) and the power consumption is about 1W at 25kHz. Moreover, the emission spectrum shows the relatively higher emission intensity of oxygen particles than those of helium and nitrogen.

• Journal of fish pathology
• /
• v.33 no.1
• /
• pp.91-95
• /
• 2020

Fish bacterial diseases have spread and caused serious problem for cultured marine fish in Korea. The important bacterial disease affecting mariculture such as olive flounder (Paralichthys olivaceus) are caused by Edwardsiella tarda, Vibrio scophthalmi and Streptococcus parauberis. For the bacterial disease protection in aquaculture industry, the water treatment is needed in aquaculture system. During the last decades atmospheric pressure non-thermal plasma in contact with liquids have received a lot of attention of environmental and medical application. In this study, we determined the disinfectant effect in seawater and three major fish bacterial disease pathogens by using low frequency plasma treatment. Three fish bacteria (E. tarda, V. schophthalmi, S. parauberis) were not detected within 16 min, 150 min and 270 min of 20 L, 500 L and 1 ton seawater post low frequency plasma treatment, respectively. Three major fish bacterial disease pathogens were not detected within 2 min after the low frequency plasma treatment, suggesting that the low frequency plasma possess disinfectant effectiveness.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.148-152
• /
• 2005

Atmospheric low-temperature plasma was produced using dielectric barrier discharge (DBD) plate-type plasma reactor and high frequency of 13.56 Hz. The surfaces of polyimide films for insulating and packaging materials were treated by the atmospheric low-temperature plasma. The contact angle of 67$^{\circ}$ was observed before the plasma treatment. The contact angle was decreased with deceasing the velocity of plasma treatment. In case of oxygen content of 0.2 %, electrode gap of 2 mm, the velocity of plasma treatment of 20 mm/sec, and input power of 400 W, the minimum contact angle of 13$^{\circ}$ was observed. The chemical characteristics of polyimide film after the plama treatment were investigated using X-ray photoelectron spectroscopy (XPS), and new carboxyl group bond was observed. The surfaces of polyimide films were changed into hydrophilic by the atmospheric low-temperature plasma. The polyimide films having hydrophilic surface will be very useful as a packaging and insulating materials in electronic devices.

• Textile Coloration and Finishing
• /
• v.26 no.3
• /
• pp.201-208
• /
• 2014

The high value-added functionality for synthetic fiber can be considered through a plasma enhanced treatment. In this study, PET(Polyethyleneterephthalate) was treated with a glow plasma and corona treatment. Surface characteristics of treated fabric were investigated using electron scanning microscopy(SEM), contact angle, X-ray photoelectron spectroscopy(XPS), tensile and adhesion strength. It was found that the contact angle showed $85.5^{\circ}$ for untreated fabric, $0^{\circ}$ for plasma and corona treatment at the condition of 200W for 7min. By XPS analysis, atomic ratio of O 1s/C 1s was increased from 0.27 to 0.43 by glow plasma and 0.27 to 0.41 by corona treatment at 200W for 7min, respectively. Glow plasma and corona treatment did not significantly change the tensile strength of PET fabric. Adhesion strength showed a substantial enhancement for the surface treated with the glow plasma, while corona treatment was adversely affected.