• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.100-101
• /
• 2019

본 논문은 유도전동기 고정자 자속 기준 벡터제어에서, 슬립 관계식과 순환 최소자승법을 이용하여 회전자 저항 및 고정자 과도 인덕턴스를 동시에 추정하는 알고리즘을 제안한다. 모의실험을 수행하여, 추정 회전자 저항과 고정자 과도 인덕턴스가 제안된 방법에 의해 각각 실제 값에 수렴함을 보인다.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.285-292
• /
• 2017

This paper describes a recursive least-squares based convergent algorithm for driving characteristic classification for personalized autonomous driving. Recently, various researches on autonomous driving technology have been conducted for level 4 fully autonomous driving. In order for commercialization of the autonomous vehicle, personalized autonomous driving is required to minimize passenger's insecureness to the autonomous vehicle. To address this problem. this study proposes mathematical model that represents driving characteristics and recursive least-squares based algorithm that can estimate the defined characteristics. The actual data of two drivers has been used to derive driving characteristics and the hypothesis testing method has been used to classify two drivers. It is shown that the proposed algorithms can derive driving characteristics and classify two drivers reasonably.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.12
• /
• pp.2353-2362
• /
• 2015

In this paper, we employ the single channel full duplex radio for wireless local area network (WLAN) systems, and design digital interference cancellers using adaptive signal processing. When the full duplex scheme is used for WLAN systems with multiple transmit and receive antennas, some interference is caused through the feedback of transmit signals from multiple antennas. To remove the feedback interference, we derive the least mean square (LMS), normalized LMS (NLMS), and recursive least squares (RLS) algorithms based on adaptive signal processing techniques. In addition, we analyze the theoretical convergence of the proposed LMS and RLS methods. The channel capacity of full duplex radios increases by two times than that of half duplex radios, when the packet error rate (PER) performances for the two systems are identical. Through numerical simulations in WLAN systems, it is shown that the full duplex method with the proposed interference cancellers has a similar PER performance with the conventional half duplex transmission scheme.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.288-289
• /
• 2007

본 논문에서는 통계적 파라미터 불확실성을 포함한 시변 선형 불확정 시스템에 대한 강인 칼만필터링 문제를 고려한다. 최소자승 관점에서 정의된 공칭 칼만필터링 문제의 목적함수를 파라미터 불확실성의 통계적 특성을 이용하여 가용한 측정행렬의 함수로 표현하고, 이로부터 근사화된 선형공간 위로의 사교사영으로 해를 도출할 수 있음을 보인다. 최종적으로 벡터 최소자승 추정기법을 동일하게 적용하여, 순환강인 칼만필터식을 유도하고, 유도된 강인 칼만필터 식이 최근 제안된 강인 최소자승 추정식에 공정잡음 및 측정잡음 분산을 반영한 보완된 형태임을 확인한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.691-698
• /
• 2003

We extend the sue of the method of least square to develop a recursive algorithm for the design of adaptive transversal filters such that, given the least-square estimate of this vector of the filter at iteration n-l, we may compute the updated estimate of this vector at iteration n upon the arrival of new data. We begin the development of the RLS algorithm by reviewing some basic relations that pertain to the method of least squares. Then, by exploiting a relation in matrix algebra known as the matrix inversion lemma, we develop the RLS algorithm. An important feature of the RLS algorithm is that it utilizes information contained in the input data, extending back to the instant of time when the algorithm is initiated. In this paper, we propose new tap weight updated RLS algorithm in adaptive transversal filter with data-recycling buffer structure. We prove that convergence speed of learning curve of RLS algorithm with data-recycling buffer is faster than it of exiting RLS algorithm to mean square error versus iteration number. Also the resulting rate of convergence is typically an order of magnitude faster than the simple LMS algorithm. We show that the number of desired sample is portion to increase to converge the specified value from the three dimension simulation result of mean square error according to the degree of channel amplitude distortion and data-recycle buffer number. This improvement of convergence character in performance, is achieved at the B times of convergence speed of mean square error increase in data recycle buffer number with new proposed RLS algorithm.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.14-21
• /
• 2007

Sight Stabilization system is the control system to preserve Line of Sight for the targets though many nonlinear disturbances and vibrations are generated. In this paper, we identified Stabilization system using RLS algorithm, one of the system identification algorithm and found out the modeling of system. Considering nonlinear operational condition this paper proposes two Knowledge-base controllers - Fuzzy controller, Fuzzy PI Gain Scheduling controller, and simulates the performances of proposed controllers compare with Lead PI controller being used in Sight system of NFIV.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.357-360
• /
• 2002

혈관에 흐르는 혈류 속도의 측정은 혈압 및 심박수와 관련된 혈류의 역학적 변화를 관찰하는 데 있어서 주로 사용되는 방법 중의 하나이다. 이 혈류 속도는 일반적으로 도플러 효과에 의하여 주파수가 변화하는 현상을 이용하여 추정하게 된다. 그런데 기존의 주파수 추정 방법들은 시불변 시스템을 가정하고 있지만 실제 혈관 속은 혈구가 일정하지 않은 속도를 갖는 시변 시스템이라 할 수 있기 때문에 이러한 시변 특성이 강한 경우 기존의 방법을 이용하게 되면 그 성능이 저하되는 경향을 보인다. 또 피시험자의 몸 상태에 따라서 서로 다른 주파수 변화 추이를 보이므로 하나의 고정 변수로써 최적화된 성능을 기대하기도 어렵다. 그러므로 본 논문에서는 시변 시스템에서 좋은 성능을 갖는 가변 망각 인자(variable forgetting factor, VFF)를 사용한 순환적인 완전 최소 자승법(recursive total least squares, RTLS) 기법을 이용한 주파수 추정 방법을 제안한다. RTLS란 TLS 기법을 순차적으로 계산하는 방법으로 시변 적응력을 향상시키는 방법이다. 또한 이 기법에 가변 망각 인자(VFF)를 적용시키는 것은 시변 시스템에서 외부적인 변화에 대하여 좀더 효율적으로 대응할 수 있기 위함이다. 기존의 방법과 성능 비교를 위하여 컴퓨터 시뮬레이션을 하였으며 그 결과 시변 시스템에서 본 논문에서 제안한 VFF를 이 용한 RTLS 기법이 보다 향상된 성능을 가지고 있음을 확인 할 수 있었다.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.1
• /
• pp.14-25
• /
• 2021

This paper presents a RLS based adaptive sliding mode observer (A-SMO) for unknown fault reconstruction in longitudinal autonomous driving. Securing the functional safety of autonomous vehicles from unexpected faults of sensors is essential for avoidance of fatal accidents. Because the magnitude and type of the faults cannot be known exactly, the RLS based A-SMO for unknown acceleration fault reconstruction has been designed with relationship function in this study. It is assumed that longitudinal acceleration of preceding vehicle can be obtained by using the V2V (Vehicle to Vehicle) communication. The kinematic model that represents relative relation between subject and preceding vehicles has been used for fault reconstruction. In order to reconstruct fault signal in acceleration, the magnitude of the injection term has been adjusted by adaptation rule designed based on MIT rule. The proposed A-SMO in this study was developed in Matlab/Simulink environment. Performance evaluation has been conducted using the commercial software (CarMaker) with car-following scenario and evaluation results show that maximum reconstruction error ratios exist within range of ±10%.

• Journal of Auto-vehicle Safety Association
• /
• v.14 no.2
• /
• pp.26-38
• /
• 2022

This paper proposes multiple RLS and actuator performance index-based adaptive actuator fault-tolerant control and detection algorithms for longitudinal autonomous driving. The proposed algorithm computes the desired acceleration using feedback law for longitudinal autonomous driving. When actuator fault or performance degradation exists, it is designed that the desired acceleration is adjusted with the calculated feedback gains based on multiple RLS and gradient descent method for fault-tolerant control. In order to define the performance index, the error between the desired and actual accelerations is used. The window-based weighted error standard deviation is computed with the design parameters. Fault level decision algorithm that can represent three fault levels such as normal, warning, emergency levels is proposed in this study. Performance evaluation under various driving scenarios with actuator fault was conducted based on co-simulation of Matlab/Simulink and commercial software (CarMaker).

• Economic and Environmental Geology
• /
• v.50 no.6
• /
• pp.517-523
• /
• 2017

A linear relationship between two stable water isotopes, oxygen and hydrogen, has been used to understand the water cycle as a basic tool. A slope and intercept from the linear relationship indicates what kind of physical processes occur during movement of water. Traditionally, ordinary least squares (OLS) method has been utilized for the linear relationship, but total least squares (TLS) method provides more accurate slope and intercept theoretically because isotopic compositions of both oxygen and hydrogen have uncertainties. In this work, OLS and TLS were compared with isotopic compositions of snow and snowmelt collected from the King Sejong Station, Antarctica and isotopic compositions of water vapor observed by Lee et al. (2013) in the western part of Korea. The slopes from the linear relationship of isotopic compositions of snow and snowmelt at the King Sejong Station were estimated to be 7.00 (OLS) and 7.16(TLS) and the slopes of stable water vapor isotopes were 7.75(OLS) and 7.87(TLS). There was a melting process in the snow near the King Sejong Station and the water vapor was directly transported from the ocean to the study area based on the slope calculations. There is no significant difference in two slopes to interpret the physical processes. However, it is necessary to evaluate the slope differences from the two methods for studies for example, groundwater recharge processes, using the absolute slope values.