• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.2
• /
• pp.17-25
• /
• 2009

A typical unsteady internal ballistic analysis model was proposed to take account of the erosive burning with the variance of local velocity and pressure along the grain surface of a solid rocket combustor. To validate the model of concern in the study, both cases of non-erosive and erosive burning were compared with the previous researches with marginal accuracy. It was quantitatively investigated that the combustion pressure, grain length, initial temperature, and vaporization temperature of propellant affect the erosive burning characteristics.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.7
• /
• pp.53-60
• /
• 2008

The purpose of this study is to make case studies on estimation of shear wave velocity in core zone of some rockfill dams by MASW (Multi-channel Analysis of Surface Waves) and to compare the results of case studies with those of the empirical method. Furthermore, the purpose is to recommend the range of shear wave velocity in core zone by MASW and to supply the preliminary data for estimation of shear wave velocity in core zone which is needed for dynamic analysis. From the results of case studies and the comparison between the results of case studies and those of empirical equation, it was found that the shear wave velocities obtained by MASW were smaller than those by the empirical recommendation (Sawada & Takahashi) in the depth of more than 10 m. Also, it is recommended that using the lower bound of empirical formulation by Sawada and Takahashi be available and resonable in case that MASW is not available due to the field condition and the investigation is preliminary.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.9 no.1
• /
• pp.17-26
• /
• 2005

Both numerical analysis and cold tests for the swirl coaxial type injector were performed to obtain the influence of spray angle, velocity ratio and liquid film thickness for pressure drop and recess. The basic experimental and numerical data obtained in this study can be applicable to the performance design of swirl coaxial type injector. Spray angle was not affected by the applied test pressure drop, but spray angle was affected by tangential velocity ratio and shape factors. Feasibility of numerical analysis for the liquid film thickness and spray angle was confirmed, and the change of liquid film thickness by tangential velocity ratio affected more seriously than pressure drop, and liquid film thickness was decreased with increasing tangential velocity ratio.

• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.65-74
• /
• 1999

From refraction data along four seismic profiles near Eonyang which the Yangsan fault passes through, the Slope Variation Indicators (SVI) are computed and interpreted in terms of fault distribution. The average velocities of 2,250-2,870 m/s are estimated using velocity-analysis functions for the target boundary along those profiles. The average velocity for Line 1 is approximately 600 m/s lower than ones for the other lines. The SVI's with amplitude greater than or equal to 0.5 ms/m are turned out to be located near faults shown on the high-resolution reflection section, as closely as one station spacing (3 m). Large amplitude SVI's are densely distributed near National Road 35, and the fault having the largest vertical slip is indicated to be located approximately 930 m west of the inferred fault on the published geologic map.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3044-3050
• /
• 2015

The purpose of this study is to analyze the performance of the flow control oil pump for automatic transmission. The numerical model for analysis the performance of the flow control oil pump was develop and the characteristics of the internal flow, discharge flow rate, displacement of outer ring, driving torque, generation of cavitation was investigated according to rotating speed. As a result, the cavitation generation increased as the rotating speed increased. The volumetric efficiency was 90% for 2200 rpm and it decreased rapidly, then it decreased about 81% for 5000 rpm. Besides, the cavitation generation was 20%~30% for inlet of suction part, but it reduced below 13% owing to the compression. However, it shows higher cavitation generation for high rotating speed like 5000 rpm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6A
• /
• pp.935-941
• /
• 2006

The hysteretic behavior of steel structure under cyclic and dynami loading such as earthquake is different to that under static loading. Because structural steels on dynamic deformation is different to static deformation with respect with mechanical characteristics and stress-strain relationship. Therefore, to accurately predict the hysteretic behavior of steel structures such as circular steel columns under cyclic and dynamic loading, the difference of loading carrying capacity and deformation according to loading rate, assumed static and dynamic deformation state, must be investigated. In this study, numerical analyses of circular steel column using SM490 for change of loading rate and diameter-thickness ratio(D/t) were carried out by using three-dimensional elastic-plastic finite element analysis and dynamic cyclic plasticity model of SM490 developed by the authors. Characteristics of hysteretic behavior of circular steel column using SM490, load carrying capacity and energy dissipation ratio, were clarified by analysis results.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.156-156
• /
• 2015

도금 시뮬레이션의 목적은 실제 도금 상황에서의 전류밀도 및 도금두께 분포를 정확히 예측하여 최상의 품질과 최적의 공정조건을 확립하는데 있다. 제품에 부착된 도금 두께는 기하학적 배치에 의한 저항 (1차 전류밀도), 전기화학적 전하교환 반응에 의한 분극 (2차 전류밀도) 및 확산, 유동 등 도금물질의 공급에 의한 분극(3차 전류밀도)에 의해 결정이 된다. 현재까지 도금 시뮬레이션은 1차 전류밀도 예측에 대한 전자기학적 해석과 Butler-Volmer 식에 근거한 동력학적 전기화학 해석을 통해 2차 전류밀도 분포 해석만 이루어졌다. 즉, 도금 반응에 있어서 물질공급은 항상 일정하게 유지되는 것을 가정하고 해석을 하였다. 이는 3차 전류밀도 분포에 있어서 전극반응 계면에서의 유동에 의한 물질공급이 전기화학과는 다른 물리(physics) 영역이어서 이를 전기화학과 coupling 하는데 기술적으로 어렵기 때문이었다. 그러므로, 물질공급반응이 속도결정단계가 되는 고속도금이나 저농도 도금, gap, tranch, via hole, through hole 등의 도금의 경우에는 해석결과에 큰 오차를 야기하게 된다. 본 발표에서는 그동안 접근하지 못했던 전기도금 해석에 있어서 유동해석을 커플링하여 다중물리해석을 한 결과를 발표한다. 시편으로는 회전원판전극과 회전 헐셀을 이용하여 회전속도 (rpm)에 따른 전류밀도 및 도금두께 분포의 변화 거동을 예측하였다.

• Computational Structural Engineering
• /
• v.6 no.1
• /
• pp.17-25
• /
• 1993

여기에서는 진동기초에 관한 해석모델로 실무에서 널리 사용되고 있는 참고문헌[1]의 진동기초 해석모델에 관한 문제점들(로킹진동, 보와 기둥의 연결부에 관한 모형화, 기계 질량의 위치지정, 작용하중의 형태)을 알아보았고, 이 문제점들을 개선한 해석모델들을 소개하였다. 참고문헌[1]의 진동기초 해석모델(모델A)과 개선된 해석모델들간의 해석결과로부터 기존의 해석모델 A는 실제보다 훨씬 긴 고유진동주기를 가져오기 때문에 진동기초에 대한 해석모델로서 부적합함을 알 수 있었다. 여기에서 소개한 해석모델중 모델 D를 이용하면 실제에 매우 가까운 진동기초의 고유진동주기와 모드형상을 얻을 수 있을 것으로 생각되며 기계회전 속도의 변화에 의한 진동기초 고유진동수와의 공진현상에 대한 세심한 검토가 필요하다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.4A
• /
• pp.311-321
• /
• 2011

To analysis the effect of reinforcement ratio and impact velocity on local damage, a series of impact analyses are performed to predict local effects. According to these results, the reinforcement ratio has no effect on the penetration depth and perforation thickness, but notable change to the scabbing area were observed. The higher the missile velocity becomes, the greater the degree of local damage to the reinforced concrete slabs is. Analysis results will be useful in the impact-resistance design of containment buildings and structures.

• Fire Science and Engineering
• /
• v.17 no.3
• /
• pp.50-54
• /
• 2003

The backlayer phenomena of smoke in the road tunnel is evaluated through numerical experiments. A commercial code, PHOENICS is used to simulate smoke flow in the road tunnel. The independent and dependent variables are ventilation air velocity and the length of backlayer of smoke respectively. Hybrid scheme and $textsc{k}-\varepsilon$ turbulence model is adopted in the simulation process and mass residual is used as a convergence criterion. The experimental results say that the length of backlayer is reduced linearly with the increase of ventilating air velocity and that there is a critical air velocity which prevents from the onset of backlayering phenomena. One finds that there is a fresh air region near the bottom of tunnel which could make the passenger escape from the region polluted by smoke. These phenomena come from the severe vertical stratification of the smoke air mixture in the tunnel.