Abstract
From refraction data along four seismic profiles near Eonyang which the Yangsan fault passes through, the Slope Variation Indicators (SVI) are computed and interpreted in terms of fault distribution. The average velocities of 2,250-2,870 m/s are estimated using velocity-analysis functions for the target boundary along those profiles. The average velocity for Line 1 is approximately 600 m/s lower than ones for the other lines. The SVI's with amplitude greater than or equal to 0.5 ms/m are turned out to be located near faults shown on the high-resolution reflection section, as closely as one station spacing (3 m). Large amplitude SVI's are densely distributed near National Road 35, and the fault having the largest vertical slip is indicated to be located approximately 930 m west of the inferred fault on the published geologic map.
양산단층이 통과하는 언양 부근에서 기록한 굴절파 4개 측선자료를 대상으로 구배변화 지시자를 구하고 단층 분포상태를 해석하였다. XY=3 m인 속도분석 함수를 이용하여 구한 대상 굴절면의 평균속도는 2,250-2,870 m/s 정도이며, 가장 서쪽에 위치한 측선 1은 다른 측선보다 굴절파 속도가 약 600 m/s 정도 작게 나타난다. XY값이 6 m와 0 m인 속도분석 함수의 차이를 이용하여 구한 구배변화 지시자의 진폭이 0.5 ms/m 이상인 곳은 고해상도 반사파 단면상에 해석된 단층위치와 대체로 일치하며, 전반적으로 한 개의 측점간격(3 m) 정도 벗어난 양상을 보인다. 진폭이 큰 구배변화 지시자는 35번 국도를 중심으로 밀집되어 나타나며, 가장 큰 단층은 지질도상의 예상단층선에서 약 930 m 서쪽에 위치하는 것으로 해석된다.