Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Performance Simulation of Flow Control Oil Pump for Auto Transmission According to Rotating Speed

자동변속기용 유량제어 오일펌프의 회전속도 변화에 따른 성능 해석

  • Moon, Han-Byul (Graduate School of Mechanical Engineering, Chosun University) ;
  • Cho, Hong-Hyun (Department of Mechanical Engineering, Chosun University)
  • 문한별 (조선대학교 기계공학과 대학원) ;
  • 조홍현 (조선대학교 기계공학과)
  • Received : 2015.02.14
  • Accepted : 2015.05.07
  • Published : 2015.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of this study is to analyze the performance of the flow control oil pump for automatic transmission. The numerical model for analysis the performance of the flow control oil pump was develop and the characteristics of the internal flow, discharge flow rate, displacement of outer ring, driving torque, generation of cavitation was investigated according to rotating speed. As a result, the cavitation generation increased as the rotating speed increased. The volumetric efficiency was 90% for 2200 rpm and it decreased rapidly, then it decreased about 81% for 5000 rpm. Besides, the cavitation generation was 20%~30% for inlet of suction part, but it reduced below 13% owing to the compression. However, it shows higher cavitation generation for high rotating speed like 5000 rpm.

본 연구는 자동변속기용 유량제어 오일펌프의 성능을 해석하는데 목적이 있다. 이를 위하여 유량제어 오일펌프의 해석적 모델을 개발하였으며 회전속도 변화에 따른 토출유량, 구동토크, 캐비테이션 발생량 등의 내부 유동특성을 분석하여 고찰하였다. 해석결과, 회전속도가 높아짐에 따라 캐비테이션 발생율이 증가하였으며 체적효율은 2200 RPM에서 90%이상으로 나타났지만 회전속도가 상승함에 따라 감소하여 5000 RPM에서 81%까지 줄어드는 것으로 나타났다. 또한 흡입부 초기에 챔버 내 캐비테이션 비율이 20%~30%로 매우 높은 비율을 보였는데 압축에 의해 붕괴 이후의 캐비테이션 비율은 13% 이하로 낮게 형성되었다. 하지만 고속인 5000 RPM에서 17%로 빠른 속도로 발생량이 증가하는 현상도 확인되었다.

Keywords

References

  1. S. H. Lee, N. K. Hur, "Numerical Study on Effects of Design Factors on Flow Characteristics of a Vane Pump", Journal of KSFM, Vol. 10, No. 3, pp. 24-31, 2007.
  2. J. O. Mo, Y. T. Kim, Y. H. Lee, "Numerical Study on Cavitation Performance Evaluation in a Centrifugal Pump Impeller", Journal of KOSME, Vol. 36, No. 2, pp. 286-293, 2012. DOI: http://dx.doi.org/10.5916/jkosme.2012.36.2.286
  3. J. S. Jang, K. H. Kim, "A Study on the Discharge Pressure Ripple Characteristics of Variable Displacement Vane Pump", Trans. of the KSME, Vol. 23, No. 3, pp. 134-145, 2003.
  4. Y. C. Peng, X. Y. Chen, Yan. CAO, G. X. Hou, "Numerical Study of Cavitation on the Surface of the Gide Vane in Three Gorges Hydropower Unit", Journal of Hydrodynamics, Vol. 22, No. 5, pp. 703-708, 2010. DOI: http://dx.doi.org/10.1016/S1001-6058(09)60106-2
  5. M. J. Kim, H. B. Jin, C. H. Son, W. J. Chung, "Numerical Analysis on Cavitation of Centrifugal Pump", Journal of KFMA, Vol. 16, No. 2, pp. 27-34, 2003.
  6. A. K. Singhal, M. M.Athavale, H. Li, Y. Jiang. "Mathematical Basis and Validation of the Full Cavitation Model", Journal of ASME, Vol. 124, No. 3, pp. 617-624, 2002. DOI: http://dx.doi.org/10.1115/1.1486223
  7. H. Lin, B. D. Storey, A. J. Szeri, "Inertially Driven Inhomogeneities in Violently Collapsing Bubbles: The Validity of the Rayleigh-Plesset Equation", Journal of Fluid mechanics. Vol. 4, No. 452, pp. 145-162, 2002. DOI: http://dx.doi.org/10.1017/s0022112001006693
  8. K. W. Nam, J. S. Hyun, J. I. Park, "Numerical Simulation in the IC Engine Lubricating Gerotor Oil Pump", Journal of JSME(B), Vol. 30, No. 10, pp. 1019-1025, 2006.
  9. J. H. Ha Latest Hydraulic Engineering. 1st edn. pp. 127-136, Cheong Moon Gak Co. Paju. 2011.
  10. C. S. Kim, C. Y. Bae, C. J. Kim, K. S. Kim, T. S. Son, "Experimental Research on the Power Saving Effect Evaluation of a Variable Displacement Vane Pump for an Automatic Transmission", Journal of KSAE. Vol. 22, No. 7, pp. 1-7, 2014. DOI: http://dx.doi.org/10.7467/ksae.2014.22.7.001
  11. I. S. Jo, B. I. Hyun, J. Y. Jung, "The Separation of the Vane and the Camring at High Speed of an Oil ydraulic Vane Pump for Automobile", Journal of KSTLE, Vol. 26, No. 2, pp. 136-141, 2010.
  12. M. S. Dong, "Study on reducing the Friction Torque of Vane Pump for Hydraulic Power Steering", Dissertation, JeonBuk University. Jeollabuk-do, Korea, 2004.
  13. J. H. Park, B. S. Hwang, J. Y. Jung, "Variable Displacement Vane Pump for Power Steering of Vehicle", Journal of IKSFC, Vol. 1, No. 3, pp. 16-19, 2004.