• Progress in Medical Physics
• /
• v.10 no.2
• /
• pp.95-101
• /
• 1999

The aims of this report are to classify the incorrect data of patients and the errors of dose and dose distribution observed in QA activities on teleradiotherapy chart, and to analyze their frequency. In our department, radiation physicists check several sheets of patient chart to reduce numeric errors before starting radiation therapy and at least once a week, which include history, port diagram, MU calculation or treatment planning summary and daily treatment sheet. The observed errors are classified as followings. 1) Identity of patient, 2) Omitted or unrecorded history sheet even though not including the item related to dose, 3) Omission of port diagram, or omitted or erroneous data, 4) Erroneous calculation of MU and point dose, and important causes, 5) Loss of summary sheet of treatment planning, and erroneous data of patient in the sheet, 6) Erroneous record of radiation therapy, and errors of daily dose, port setup, MU and accumulated dose in the daily treatment sheet, 7) Errors leading inexact dose or dose distribution, errors not administerd even though its possibility, and simply recorded errors, 8) Omission of sign. Number of errors was counted rather than the number of patients. In radiotherapy chart QA from Jun 17, 1996 to Jul 31, 1999, no error of patient identity had been observed. 431 Errors in 399 patient charts had been observed and there were 405 physical errors, 9 cases of omitted or unrecorded history sheet, and 17 unsigned. There were 23 cases (5.7%) of omitted port diagram, 21 cases (5.2%) of omitted data and 73 cases (18.0 %) of erroneous data in port diagram, 13 cases (3.2 %) treated without MU calculation, 68 cases (16.3 %) of erroneous MU, 8 cases (2.0%) of erroneous point dose, 1 case (0.2 %) of omitted treatment planning summary, 11 cases (2.7%) of erroneous input of patient data, 13 cases (3.2%) of uncorrected record of treatment, 20 cases (4.9%) of discordant daily doses in MU calculation sheet and daily treatment sheet, 33 cases (8.1%) of erroneous setup, 52 cases (12.8%) of MU setting error, 61 cases (15.1%) of erroneous accumulated dose. Cases of error leading inexact dose or dose distribution were 239 (59.0 %), cases of error not administered even though its possibility were 142 (35.1 %), and cases of simply recorded error were 24 (5.9 %). The numeric errors observed in radiotherapy chart ranged over various items. Because errors observed can actually contribute to erroneous dose or dose distribution, or have the possibility to lead such errors, thorough QA activity in physical aspects of radiotherapy charts is required.

• Journal of the Institute of Convergence Signal Processing
• /
• v.21 no.1
• /
• pp.13-20
• /
• 2020

In shipyards, internal materials are assembled after designing and manufacturing each ship's block. Internal material assembly means the installation of parts and equipment except ship's body. In this process, if the assembly of pipes and equipment existing in the block is not done correctly during the assembly between blocks, this causes a lot of costs. In addition, even if the assembly of the internal materials already completed, the production efficiency of the ship is reduced due to rework when problems such as space arrangement of the internal materials occurs. Therefore, this study introduces space arrangement and inspection system before and after hull outfitting work based on coexistence reality technology using 3D design drawing to solve these problems. The various coexistence reality algorithms and inspection systems developed and introduced in this study are based on AR service, which has never been introduced in Korea. So it will be widely applicable to various manufacturing industries using design drawings such as automobiles and architectures as well as ship building process.

• Journal of Korea Water Resources Association
• /
• v.53 no.spc1
• /
• pp.755-764
• /
• 2020

In South Korea, 850 standard watersheds and 7,807 KRF catchment areas have been used as basic maps for water resources policy establishment, however it becomes necessary to set up new standard maps with a more appropriate scale for the integrated managements of surface water-groundwater as well as water quantity-quality in the era of integrated water management. Since groundwater has a slow flow velocity and also has 3-D flow properties compared to surface water, the sub-catchment size is more effective than the regional watershed for the evaluation of surface water-groundwater interaction. The KRF catchment area, which has averagely a smaller area than the standard watershed, is similar to the sub-catchment area that generally includes the first-order or second-order tributaries. Some KRF catchment areas, which are based on the surface reach, are too small or large in a wide plain or high mountain area. Therefore, it is necessary to revise the existing KRF area if being used as a unit area for integrated management of surface-water and groundwater. A unit watershed with a KRF area of about 5 to 15 ㎢ can be effective as a basic unit for water management of local government considering a tributary composition and the location of groundwater wells, and as well it can be used as a basic tool for water demand-supply evaluation, hydrological observation system establishment, judgment of groundwater permission through a total quantity management system, pollution assessment, and prioritizing water policy, and etc.

• Journal of Navigation and Port Research
• /
• v.34 no.10
• /
• pp.747-756
• /
• 2010

This study is on the spatial composition of accommodation area in accommodation barge. The accommodation barge which is used as living facilities for offshore plants' workers can be classified into Accommodation Work Barge, Accommodation Pipe Lay Barge and Multi-purpose Accommodation Barge. We study on the spatial composition of accommodation area in Accommodation Work Barge, most frequently used, through analyzing G.A drawings of the barges. The spatial composition has great influences into the convenience and amenity for workers' daily life in the accommodation area of accommodation barge. The spatial composition of accommodation area shows many characteristics not in horizontal arrangement on any deck but in vertical space arrangement on layers of decks. The particular types of vertical space composition can be classified into 'Centralized Type' and 'Dispersive Type'. These two types will be the basis of space planning for new accommodation barge.

• Journal of the Korea Convergence Society
• /
• v.8 no.9
• /
• pp.293-300
• /
• 2017

The purpose of this study is to analyze the various cinematic gaze and its realization through Seojong MA-Residence in Yangpyeong-gun, completed in 2016. This paper will focus on what kinds of cinematic concepts and design ideas were selected and considered in the stage of concept design, then how the site plan, floor plan, elevation and section design were developed in the stage of schematic design, and finally how much of the design intentions were successfully realized to the residential building. Architectural sketches, physical models and drawings at the concept & schematic design stage were reviewed. After the construction, some important issues were successfully realized such as interesting cinematic views to outside, visual openness and inflow of sunlight.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.40 no.5
• /
• pp.19-32
• /
• 2012

The purpose of this study is to quantitatively measure the view target and the view area through the selection of landscape control point by selecting Jimyeong-dong Dong-gu and Yeongyeong-dong Buk-gu Daegu, which are planned as the large scale housing complex development area, as the target places. It is very meaningful that from the simulation based on this measurement, the improvement methods are attempted to be suggested at the project level. The results of this study are as follows. First, the total number of viewing targets derived from the literature analysis for the selection of the viewing targets was 24, and finally derived main viewing targets were 4 places. Second, the total number of selection criteria of the derived landscape control point was 15, and these were re-categorized as prospect, accessibility and publicness according to the common property. The preliminary LCPs were selected by measuring the publicness and accessibility, and because of the said measurement, a total of 43 preliminary LCPs were selected. The final LCPs were selected by estimating the prospect of the selected preliminary LCPs, and as a result of estimation, a total of 29 final LCPs were selected. Finally, the total number of evaluation indicators derived from literature analysis was 26. Because of the valuation by the landscape control point, it was found that the 2 view areas were the I grade, 3 areas were II grade and 3 areas were the V grade, the lowest grade among 29 view areas. From the analysis on problems for the improvement methods, 4 improvement-indicators including the diversity of land mosaic were selected for the view area-1 without considering the development project drawing. In addition, for the view area-2 with considering the development project drawing, the landscape as the scenery forests was well formed, and the arrangement of architectures for the security of view corridor was right angle arrangement, and their floor number was 10.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.20 no.3
• /
• pp.1-10
• /
• 2021

Before long the number of Elementary School students per class will be 20 in Korea, but the current Area and Module of Elementary School are planned for 30 students. Therefore, necessary Area and Module for less than 20 students should be prepared. The purpose of this research is to find out necessary Area and Module for less than 20 students in Elementary School Classroom. I researched 60 Classrooms of 10 Elementary Schools before 2 researches of mine, and researched the sizes of every path in the classrooms. With the Plans for 20 students, I found the conclusion as follows: First, the one-way class requires a minimum of 5.4m×8.1m (43.74m²), a maximum of 5.4m×8.7m (48.6m²). Second, the 3-row alignment class requires a minimum of 7.2m×7.2m (51.84m²), a maximum of 7.5m×7.5m (56.25m²). Third, the group study class requires a minimum of 6.0m×8.7m (52.2m²), a maximum of 6.3m×9.3m (58.59m²). Fourth, the group study class requires a minimum of 2.34m², a maximum of 14.85m² more than the one-way class. Fifth, the suitable module which fits both 2-row alignment class and group study class except the 3-row alignment class is 6.0m×8.7m (52.2m²).

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.15 no.1
• /
• pp.19-29
• /
• 2016

This study aims to find a direction for desirable space organization in future Korean kindergartens by analyzing the current status of space organization in Japanese kindergartens. This study includes comparisons and analyses of Korean and Japanese curricula, facility standards on the national level and standards of national subsidy, current numbers of kindergarteners and preschoolers, and changes in kindergarten facilities over the last 5 years. Six kindergartens each in Korea and Japan, which were constructed after 2011 or are recommended as being good in space organization and kindergarten planning, are selected. The contents of space organization analysis are 'entry and placement, outdoor space', 'space program,' and 'plan design and organization of unit space'. In conclusion, in terms of space organization, Korean and Japanese kindergartens are very similar to each other. However, Japanese kindergartens have more outdoor space about $9.75m^2$ and lot area about $11.89m^2$ than Korean kindergartens. The extra space was used to educate students in various contents regarding social network and physical activity. Furthermore, in Japan, special spaces such as "atelier classes" and "PTA" were used for various types of education. Based on the results of the study will be developed, such as specific models and guidelines for the improvement of facilities Korea kindergarten.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.529-536
• /
• 2005

Recently the building of ultra large container ship are discussed among ship building companies and ship operating company who have a tendency to pursue the advantage of large scale of economy. These tendency will be continued for the time being, if ship-building skill and economical efficiency are available. As the enlargement of container ship size becomes hot issues in ship-building markets, the needs for re-arrangement of accommodation house in large container ship are proposed carefully in some researches. This study examined economical efficiency of re-arrangement of accommodation house in ultra large container ship. The separation between accommodation and engine room is proposed through out drawing works in initial design stage and we examined the merits and demerits of the separation in the view of economical efficiency. The RFR(Required Freight Rate) is considered as the objective function to evaluate the re-designed vessel. The economical benefits are analyzed in the view of ship operator and shipyard respectively.

• Journal of architectural history
• /
• v.7 no.4 s.17
• /
• pp.191-198
• /
• 1998

The form of Pantheon in Rome is graphically analyzed in relation to the angle of the Sun that varies through four seasons of the year. These are worked out in the Autocad drawing files for exactitude and efficiency. Some of the results suggest that the Pantheon is carefully designed to predict the equinoxes and the solstices.