• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.7B
• /
• pp.1006-1012
• /
• 2001

본 논문에서는 다른 클럭원들을 갖는 서로 다른 오실레이터에 의해 발생된 비동기 클럭을 입력으로 받아 동기신호로 변환시키는 기능과 그 중 어느 한 클럭이 동작하지 않더라도 동작하는 클럭을 계속 유지하여 클럭 중단의 위험을 제거한 안전모드를 추가한 기능의 구현을 기술한다. 특히, 통신 분야에서 ASIC으로 Chip을 개발할 때 다중 클럭의 사용은 필연적이며 비동기 신호를 동기신호로 변환하는 기능의 구현은 기본적이면서도 중요한 부분이다. 이 회로는 VHDL로 구현이 되었으며 다중 클럭 관련 ASIC 구현에 기본적으로 응용이 가능하다.

• Electronics and Telecommunications Trends
• /
• v.13 no.2 s.50
• /
• pp.1-9
• /
• 1998

고속 광 시스템에서 필요로 하는 광 재생 중계기, 시간 분할 스위칭 시스템이나 다중 분리화 회로 및 클럭 재생 기술이 필수적이다. 본 고에서는 고주파수 광 클럭 추출을 구현하기 위해서 활발히 진행되고 있는 광 클럭 재생 기술의 최근 개발 동향을 분석해 보고자 한다. 아직은 어느 하나도 완벽한 방법이라 할 수 없겠지만, 각 방법의 장단점을 헤아려 보고 구성하고자 하는 통신망에 적절한 광 클럭 재생기술을 채택하여 사용하는 것이 필요하리라 본다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.2
• /
• pp.84-92
• /
• 2007

This paper proposes an interconnect delay fault test (IDFT) solution on boards and SoCs based on IEEE 1149.1 and IEEE P1500. A new IDFT system clock rising edge generator which forces output boundary scan cells to update test data at the rising edge of system clock and input boundary scan cells to capture the test data at the next rising edge of the system clock is introduced. Using this proposed circuit, IDFT for interconnects synchronized to different system clocks in frequency can be achieved efficiently. Moreover, the proposed IDFT technique does not require any modification of the boundary scan cells or the standard TAP controller and simplifies the test procedure and reduces the area overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.10
• /
• pp.1001-1008
• /
• 1991

.In this paper the efficient clock recovery algorithm is proposed to regenerate the manchester code at the system using the Manchester encoding scheme such as LAN. Mobile communication and digital communication systems. The proposed clock recovery circuit recovers the clock using the two times of the same original transmitted frequency can be completely recovered. The implementation of the proposed clock recovery circuit and the interpretation of test results prove the validity of the proposed algorithm.

• Korean Journal of Optics and Photonics
• /
• v.17 no.1
• /
• pp.68-74
• /
• 2006

We have extracted an optical clock signal from a return-to-zero(RZ) pseudorandom bit sequence(PRBS) and non-return-to-zero(NRZ) PRBS data in a pulsation multi-section laser diode with DFB reflector. The ms timing jitter achieved less than 1 ps for the input 11.727 Gbit/s RZ PRBS and NRZ PRBS data. The PRE data wasconverted from the NRZ data using an NRZ to pseudo-return to zero(PRZ) converter module. The optical clock was extracted from the PRZ data which contains the clock components. Although the input PRZ data gives a timing jitter of 2 ps, the extracted clock has timing jitter of ${\~}$1 ps.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.583-586
• /
• 2004

In this paper, we have analyzed the performance of synchronization of CCK(Complementary Code Keying) modulation scheme used for IEEE 802.11g wireless LAM system supporting 54 Mbps of high speed data rate over 2.4 GHz. At receiver, the clock frequency offset is caused by noise or fading. This frequency error occurs the offset of clock timing and causes ISI. Therefore the tracking is required to reduce the clock timing offset. The DLL(Delay Lock Loop), asychronization mode, performing tacking the clock is used for the simulation. The simulation result shows jitter variance and BER performance in the AWGN and multipath fading channel environment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.1 s.343
• /
• pp.37-44
• /
• 2006

This paper proposes an interconnect delay fault test (IDFT) solution on boards and SoCs based on IEEE 1149.1 and IEEE P1500. A new IDFT system clock rising edge generator which forces output boundary scan cells to update test data at the rising edge of system clock and input boundary scan cells to capture the test data at the next rising edge of the system clock is introduced. Using this proposed circuit, IDFT for interconnects synchronized to different system clocks in frequency can be achieved efficiently. Moreover, the proposed IDFT technique does not require any modification of the boundary scan cells or the standard TAP controller is simple in terms of test procedure and is small in terms of area overhead.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.1-8
• /
• 2005

An area-efficient DC-DC voltage up-converter in a poly-Si TFT technology for system-on-glass is described which provides low-ripple output. The voltage up-converter is composed of charge-pumping circuit, comparator with threshold voltage mismatch compensation, oscillator, buffer, and delay circuit for multi-phase clock generation. The low ripple output is obtained by multi-phase clocking without increasing neither clock frequency nor filtering capacitor The measurement results have shown that the ripple on the output voltage with 4-phase clocking is 123mV, while Dickson and conventional cross-coupled charge pump has 590mV and 215mV voltage ripple, respectively, for $Rout=100k\Omega$, Cout-100pF, and fclk=1MHz. The filtering capacitor required for 50mV ripple voltage is 1029pF and 575pF for Dickson and conventional cross-coupled structure, for Iout=100uA, and fclk=1MHz, while the proposed multi-phase clocking DC-DC converter with 4-phase and 6-phase clocking requires only 290pF and 157pF, respectively. The efficiency of conventional and the multi-phase clocking DC-DC converter with 4-phase clocking is $65.7\%\;and\;65.3\%$, respectively, while Dickson charge pump has $59\%$ efficiency.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.72-80
• /
• 2010

The 1Gbps clock and data recovery (CDR) circuit using the proposed multi-point phase detector (PD) is presented. The proposed phase detector generates up/down signals comparing 3-point that is data transition point and clock rising/falling edge. The conventional PD uses the pulse width modulation (PWM) that controls the voltage controlled oscillator (VCO) using the width of a pulse period's multiple. However, the proposed PD uses the pulse number modulation (PNM) that regulates the VCO with the number of half clock cycle pulse. Therefore the proposed PD can controls VCO preciously and reduces the jitter. The CDR circuit is tested using 1Gbps $2^{31}-1$ pseudo random bit sequence (PRBS) input data. The designed CDR circuit shows that is capable of recovering clock and data at rates of 1Gbps. The recovered clock jitter is 7.36ps at 1GHz and the total power consumption is about 12mW. The proposed circuit is implemented using a 0.18um CMOS process under 1.8V supply.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.137-144
• /
• 2013

A delay-locked loop (DLL) that generates a 32-phase clock with the operating frequency of 125 MHz is introduced. The proposed DLL uses a delay line of $4{\times}8$ matrix architecture to improve a differential non-linearity (DNL) of the delay line. Furthermore, a integral non-linearity (INL) of the proposed DLL is improved by calibrating phases of clocks that is supplied to four points of an input stage of the $4{\times}8$ matrix delay line. The proposed DLL is fabricated by using $0.11-{\mu}m$ CMOS process with a 1.2 V supply. The measured operating frequency range of the implemented DLL is 40 MHz to 280 MHz. At the operating frequency of 125MHz, the measurement results shows that the DNL and INL are +0.14/-0.496 LSB and +0.46/-0.404 LSB, respectively. The measured peak-to-peak jitter of the output clock is 30 ps when the peak-to-peak jitter of the input clock is 12.9 ps. The area and power consumption of the implemented DLL are $480{\times}550{\mu}m^2$ and 9.6 mW, respectively.