• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.129-129
• /
• 2003

최근에 능동 영역 액정 표시 소자(Active Matrix Liquid Crystal Display, AMLCD)에서 고해상도와 빠른 응답속도를 요구하게 되면서부터 다결정 실리콘(poly-Si) 박막 트랜지스터(Thin Film Transistor, TFT)가 쓰이게 되었다. 그리고 일반적으로 디스플레이의 기판을 상대적으로 저가의 유리를 사용하기 때문에 저온 공정이 필수적이다. 따라서 새로운 저온 결정화 방법과 부가적으로 최근 디스플레이 개발 동향 중 하나인 대화면에 적용 가능한 공정인 금속유도 결정화 (Silicide Mediated Crystallization, SMC)가 연구되고 있다. 이 소자는 top-gated coplanar구조로 설계되었다. (그림 1)(100) 실리콘 웨이퍼위에 3000$\AA$의 열산화막을 올리고, LPCVD로 55$0^{\circ}C$에서 비정질 실리콘(a-Si:H) 박막을 550$\AA$ 증착 시켰다. 그리고 시편은 SMC 방법으로 결정화 시켜 TEM(Transmission Electron Microscopy)으로 SMC 다결정 실리콘을 분석하였다. 그 위에 TFT의 게이트 산화막을 열산화막 만큼 우수한 TEOS(Tetraethoxysilane)소스로 사용하여 실리콘 산화막을 1000$\AA$ 형성하였고 게이트는 3000$\AA$ 두께로 몰리브덴을 스퍼터링을 통하여 형성하였다. 이 다결정 실리콘은 3$\times$10^15 cm^-2의 보론(B)을 도핑시켰다. 채널, 소스, 드래인을 정의하기 위해 플라즈마 식각이 이루어 졌으며, 실리콘 산화막과 실리콘 질화막으로 passivation하고, 알루미늄으로 전극을 형성하였다 그리고 마지막에 TFT의 출력특성과 전이특성을 측정함으로써 threshold voltage, the subthreshold slope 와 the field effect mobility를 계산하였다.

• Korean Journal of Metals and Materials
• /
• v.46 no.6
• /
• pp.377-381
• /
• 2008

Prism sheet of LCD BLU which depends on supply from Japan and U.S.A was studied by using Si anisotropic etching and injection molding technologies. First, the prism sheet was patterned on Si wafer through photolithography, and the best conditions of Si etching were determined through etching Si wafer with TMAH to obtain straight optimized zigzag patterns, and a cross pattern to provide light diffusion and concurrent focusing. The etch rate of TMAH was concluded to be constant for $25wt%-70^{\circ}C$ condition. Ni stamp of prism sheet was made by electrodeposition using patterned Si wafer, normal or fast H/C(Heating/Cooling) injections were carried out to fabricate prism sheet. It was known that fast H/C injection could fabricate prism sheet more accurately than normal injection. Zigzag patterns and the cross pattern showed higher transmissivity than the straight patterns because of light diffusion through diagonal direction. The fast H/C injection for zigzag patterns showed lower transmissivity than normal injection because there occurred more light diffusion through precise injection patterns, but the fast H/C injection for straight patterns showed only refraction without diffusion, causing lower transmissivity than normal injection.

• Korean Journal of Metals and Materials
• /
• v.49 no.10
• /
• pp.797-804
• /
• 2011

In this study, the mechanisms of the three steps (the polymer deposition step, the polymer etching step and the Si etching step) that constitute the Bosch process were investigated. The effects of radicals and ions on each step were quantitatively analyzed by comparing the simulated aspect ratio dependency of the deposition or etch rate with the experimental results. In the polymer deposition step, fluorocarbon polymer is deposited by chemical reactions of $CF_x$ radicals, of which the reaction probability is 0.13. Although the polymer etching step and the Si etching step were conducted under the same conditions, the etching mechanisms of polymer and Si were found to be quite different. In the polymer etching step, both chemical etching and physical sputter-etching contribute to the polymer etching. Whereas, in the Si etching step, Si is chemically etched by F radicals, of which the reactivity is greatly increased by the bombardment of energetic ions.

• Solar Energy
• /
• v.17 no.4
• /
• pp.3-11
• /
• 1997

Because grain boundaries in polycrystalline silicon act as potential barriers and recombination centers for the photo-generated charge carriers, these defects degrade conversion effiency of solar cell. To reduce these effects of grain boundaries, we investigated various influencing factors such as thermal treatment, various grid pattern, selective wet etching for grain boundaries, buried contact metallization along grain boundaries, grid on metallic thin film. Pretreatment above $900^{\circ}C$ in $N_2$ atmosphere, gettering by $POCl_3$ and Al treatment for back surface field contributed to obtain a high quality poly-Si. To prevent carrier losses at the grain boundaries, we carried out surface treatment using Schimmel etchant. This etchant delineated grain boundaries of $10{\mu}m$ depth as well as surface texturing effect. A metal AI diffusion into grain boundaries on rear side reduced back surface recombination effects at grain boundaries. A combination of fine grid with finger spacing of 0.4mm and buried electrode along grain boundaries improved short circuit current density of solar cell. A ultra-thin Chromium layer of 20nm with transmittance of 80% reduced series resistance. This paper focused on the grain boundary effect for terrestrial applications of solar cells with low cost, large area, and high efficiency.

• Clean Technology
• /
• v.25 no.1
• /
• pp.14-18
• /
• 2019

In general after the etching process, waste etching solution contains metals. (ex. Nickel (Ni), Chromium (Cr), Zinc (Zn), etc.) In this work, we proposed a recycling process for waste etching solution and refining from waste liquid contained nickel to make nickel metal nano powder. At first, the neutralization agent was experimentally selected through the hydrolysis of impurities such as iron by adjusting the pH. We selected sodium hydroxide solution as a neutralizing agent, and removed impurities such as iron by pH = 4. And then, metal ions (ex. Manganese (Mn) and Zinc (Zn), etc.) remain as impurities were refined by D2EHPA (Di-(2-ethylhexyl) phosphoric acid). The nickel powders were synthesized by liquid phase reduction method with hydrazine ($N_2H_4$) and sodium hydroxide (NaOH). The resulting nickel chloride solution and nickel metal powder has high purity ( > 99%). The purity of nickel chloride solution and nickel nano powders were measured by EDTA (ethylenediaminetetraacetic) titration method with ICP-OES (inductively coupled plasma optical emission spectrometer). FE-SEM (field emission scanning electron microscopy) was used to investigate the morphology, particle size and crystal structure of the nickel metal nano powder. The structural properties of the nickel nano powder were characterized by XRD (X-ray diffraction) and TEM (transmission electron microscopy).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.471-475
• /
• 1999

The metal plasma-etch damage immunity of nMOSFET with $N{_2}O$ gate oxide is found to be improved comparing to that with regular pure oxide of similar thickness. With increasing the antenna ratio (AR), the characteristics of nMOSFETs with $N{_2}O$ oxide shows tighter initial distribution and smaller degradation under constant field stress, which is explained by the effect of the nitrogen at the substrate $Si/SiO_2$ interface. Also, if $N{_2}O$ gate oxide is used, the maximum allowable size of metal AAR and PAR may be increased to the much larger values. These improvements of nMOSFETs with $N{_2}O$ gate oxide are attributed to the effect of the interface hardness improved by the nitrogen included at the substrate-Si/$N{_2}O$-oxide interface.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.45-51
• /
• 2007

We designed and fabricated the planar graded-gap injector GaAs Gm diodes with $1.6{\mu}m$ active length for operation at 94 GHz. The fabrication of the Gunn diode is based on MESA etching, Ohmic metalization, and overlay metalization. The measured negative resistance characteristics of the graded-gap injector GaAs Gunn diodes are examined for two different device structures changing the distance between the cathode and the anode electrodes. Also, we discuss the DC results under the forward and the reverse biases concerning the role of the graded-gap injector. It is shown that the structure having the shorter distance between the cathode and the anode electrode has higher peak current, higher breakdown voltage, and lower threshold voltage than those of the larger distance.

• Korean Journal of Materials Research
• /
• v.7 no.11
• /
• pp.1018-1023
• /
• 1997

본 연구에서는 3C-SiC의 ohmic 접합에 대하여 그 전기적 특성과 미세구조의 상관관계에 대하여 분석하였다. 표준사진식각 공정을 통하여 ohmic접합 금속으로서 Ni을 진공증착시켜 일련의 TLM패턴으로 열처리에 따르는 전류-전압 특성을 조사하였고 TEM, SEM, AES, EDS를 사용하여 Ni/SiC 계면에 대한 미세구조, 화학적 특성을 분석하였다. 열처리 온도와 시간을 통한 thermal budget이 증가함에 따라서 접촉저항이 감소되었으며 그 값은 $10^{-2}$-$10^{-4}$Ω$\textrm{cm}^2$의 범위에 속하였다. EDS와 AES를 통하여 7$50^{\circ}C$이상의 열처리 후 silicide(NiSi$_{2}$)의 주변에 carbon층이 형성되는 것을 확인하였으며, 열처리 온도가 증가함에 따라서 island형 silicide의 크기가 조밀해지며 SiC와의 접착성이 향상됨을 알 수 있었다. Ni/3C-SiC ohmic 접합의 전기적 특성은 계면에 생성되는 silicide와 carbon의 형성거동에 의하여 결정되는 것으로 믿어진다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.562-562
• /
• 2013

산소 플라즈마는 음이온을 발생시키는 음전성 플라즈마로서 감광제 세정이나 금속, 폴리실리콘 등의 식각을 위해 할로겐 가스와 혼합하여 반도체나 디스플레이 공정에 광범위하게 사용되고 있다. 산소 플라즈마는 아르곤 플라즈마와 그 특성이 상이하고, 다량의 음이온이 국부적으로 만들어지므로 음이온의 공간분포 진단이 중요하다. 본 연구에서는 평판형 부유형 탐침에 고조화파 분석법을 적용하여 양이온의 밀도를 구하고, 직류 차단 커패시터를 제거하여 접지전위에서 전자 전류 측정을 통하여 위치에 따른 전자의 상대적인 공간 분포를 얻었다. 이러한 방법으로 측정된 양이온과 전자의 공간 분포로부터 음이온의 공간 분포를 구할 수 있었다. 가스 압력, 산소 첨가량, 인가 전력 등 여러 조건에서 측정된 음이온의 분포는 이론적인 경향성과 유사함을 확인할 수 있었다.

• The Journal of the Korean dental association
• /
• v.23 no.7 s.194
• /
• pp.577-583
• /
• 1985

The purpose of this investigation was to evaluate scanning electron micrographs of repeatedly cast base metal alloy. For this study two Ni-Cr-Be alloys were used; Rexillium III and Verabond. They were repeatedly cast without addition o new alloy melting with an electric resistant furnace (Castron 8, Yoshida dental equipment Mfg.Co.). They were etched with 10% H₂SO₄ Sol. at 300mA/㎠ for 3 minutes with the use of metal etching unit Oxyetch (OXY dental product Inc.), and ultrasonic cleaning in 18% HC1 Sol. was done. Etched surfaces were examined under a SEM at x 200 and x 750. The surfaces are shown in legends.