• 한국전기전자재료학회논문지
• /
• 제28권3호
• /
• pp.160-164
• /
• 2015

In this study, $(1-x)Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3+xCeMnO_3$ (x= 0~0.02) ceramics were prepared by Columbite precursor method. The phase structure, ferroelectric and piezoelectric properties were systematically investigated. It was found that PMW-PNN-PZT possessed superior electrical properties due to its composition close to the MPB (morphotropic phase boundary). Coercive electric field of 10.05 [kV/cm] and density of 7.88 [$g/cm^3$] were obtained when the substitution amount of $CeMnO_3$ is x=0.02. In contrast, specimens with x=0.01 showed the mechanical quality factor($Q_m$) of 1,091 and the electromechanical coupling factor($k_p$) of 0.613.

• 한국전기전자재료학회논문지
• /
• 제28권3호
• /
• pp.165-169
• /
• 2015

In this paper, in order to develop the composition ceramics with the excellent dielectric properties, $Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3$ ceramics were fabricated by the conventional solid-state method. The effects of ZnO addition on their microstructure and piezoelectric properties were systematically investigated. The rhombohedral-tetragonal phase coexistence has been found in the ceramics without ZnO content and then with further increasing ZnO content, specimens exhibited tetragonal phase. The optimized ZnO content formed liquid phase and aided the grain growth of specimens. When 0.4 wt% ZnO was added, the optimal physical properties ($d_{33}=422pC/N$, $d_{31}=161pC/N$, ${\varepsilon}_r=1,905$, $k_p=0.55$, $Q_m=160$) were obtained.

• 한국전기전자재료학회논문지
• /
• 제23권8호
• /
• pp.601-604
• /
• 2010

In this study, the piezoelectric energy harvester was investigated employing the pillar structure with the diameter size of 50~500 um. Usually, the aspect ratio between the height and diameter was related with the piezoelectric performance. High aspect ratio was showed the low electric noise and high piezoelectric properties than low aspect ratio. Therefore, we have selected the Su-8 photo-resist and modified lithography process to manufacture the pillar structure with height above the 250 ${\mu}m$. In this presentation, we will report the process and properties of micro pillar structure based on the PMN-PZT (Pb$(Mg_{1/3}Nb_{2/3})O_3$-PbZrTiO$_3$) materials.

• 한국세라믹학회지
• /
• 제52권1호
• /
• pp.77-82
• /
• 2015

The effect of the electrode type on the dielectric and piezoelectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbZrO_3-PbTiO_3$ (PMN-PZT) single crystals was investigated in an effort to improve their properties for various piezoelectric applications. First, three different types of PMN-PZT single crystals [PMN-PZT-A (piezoelectrically soft type; dielectric constant ~ 10,000), PMN-PZT-B (piezoelectrically soft type; phase-transition temperature between the rhombohedral and tetragonal phases ($T_{RT}$) ~ $145^{\circ}C$), PMN-PZT-C (piezoelectrically hard type; high mechanical quality factor ($Q_m$) ~ 1,000)] were fabricated using the solid-state single crystal growth (SSCG) method. Then, four different types of electrodes [sputtered Au, sputtered Cr/Au, sputtered Ti/Au, and fired Ag] were formed on the single crystals, and their dielectric and piezoelectric properties were measured. The single crystals with a sputtered Ti/Au electrode showed the highest dielectric and piezoelectric constants but the lowest coercive electric field ($E_C$). The single crystals with a fired Ag electrode showed the lowest dielectric and piezoelectric constants but the highest coercive electric field ($E_C$). This dependence on the type of electrode was most significant in the piezoelectrically hard PMN-PZT-C single crystals. However, the effects of the electrode type on the phase transition temperatures ($T_C$, $T_{RT}$) and dielectric loss were negligible. These results clearly demonstrate that it is important to select an appropriate electrode so as to maximize the dielectric and piezoelectric properties of single crystals in each type of piezoelectric application.

• 자원환경지질
• /
• 제38권4호
• /
• pp.481-492
• /
• 2005

이 연구에서는 광주지역 하상퇴적물에 대한 지질집단별 지구화학적 특성에 대해 규명 하고자 한다. 이를 위해 물이 흐르고 있는 1차 수계를 대상으로 하상퇴적물시료 104개를 채취하였고, 실험실에서 자연건조 시켰다. 화학분석을 위한 시료는 알루미나 몰타르를 이용하여 200메쉬 이하로 분쇄하였고, XRF ICP-AES, NAA분석을 실시하였다. 연구지역 하상퇴적물에 대해, 지질집단별 지구화학적 특성 비교와 기존 암석에 대한 연구에서 얻어진 암석화학적인 특성과의 비교를 위해, 선캠브리아기 화강편마암 지역, 쥬라기 화강암 지역, 백악기 화순안산암 지역으로 분리하였다 광주지역 하상퇴적물의 주성분원소 함량은 $SiO_2\;51.89\~70.63\;wt.\%,\;Al_2O-3\;12.91\~21.95\;wt.\%,\;Fe_2O_3\;3.22\~9.89\;wt.\%,\;K_2O\;1.85\~4.49\;wt.\%,\;MgO\;0.68\~2.90\;wt.\%,\;Na_2O\;0.48\~2.34\;wt.\%,\;CaO\;0.42\~6.72\;wt.\%,\;TiO_2\;0.53\~l.32\;wt.\%,\;P_2O_5\;0.06~0.51\;wt.\%\;and\;MnO\;0.05\~0.69\;wt.\%.$이다. 하상퇴적물과 암석에 대한 AMF 삼각도에서, 암석은 칼크-알칼리계열에 도시되는데 비하여, 하상퇴적물은 솔레아이트 계열과 칼크-알칼리계열의 경계부위에 도시된다. 이는 $Fe_2O_3$ 함량이 암석에서보다 하상퇴적물에 더 많이 함유되어 있는 것과 관련이 있는 것으로 보인다. $SiO_2$에 대한 $K_2O+Na_2O$의 비교그림에서, 하상퇴적물은 암석에서와 같이 subalkaline 계열에 점시된다. 하상퇴적물의 미량성분원소 및 희토류 원소 함량은 $Ba 590\~2170ppm$, Be$1\~2.4$ppm, Cu $13\~179ppm$, Nb $20\~34ppm$, Ni$10\~50ppm$, Pb $17\~30$ppm, Sr $70\~1025$ ppm, V$42\~135$ ppm, Zr$45\~171$ ppm, Li$19\~77$ppm, Co$4.3\~19.3$ppm, Cr$28\~131$ppm, Cs$3.1\~17.6$ ppm, Hf $5\~27.6$ ppm, Rb $388\~202$ ppm, Sb$0.2\~l.2$ ppm, Sc$6.4\~17$ ppm, Zn $47\~389$ ppm, Pa $8.8\~68.8$ ppm, Ce$62\~272$ppm, Eu$1\~2.7$ppm and Yb$0.9\~6$ppm의 범위를 보인다.

• 한국전기전자재료학회논문지
• /
• 제29권6호
• /
• pp.332-336
• /
• 2016

In this study, in order to develop the composition ceramics for ultrasonic sensor with high $d_{33}*g_{33}$, $Pb_{1-3x/2}Bix(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_{0.09}(Zr_{0.5}Ti_{0.5})_{0.88}O_3$(PMW-PNN-PZT) system ceramics were prepared using CuO as sintering aids. And then, their microstructure, piezoelectric and dielectric characteristics were systemetically investigated with bismuth substitution. The PMW-PNN-PZT ceramic specimens could be sintered at sintering temperature of $940^{\circ}C$ by adding sintering aids. At x=0.015 specimen, the density, electromechanical coupling factor($k_p$), dielectric constant, piezoelectric constant($d_{33}$) and piezoelectric figure of merit($d_{33}*g_{33}$) indicated the optimal properties of $7.90g/cm^3$, 0.67, 2,511, 628 pC/N, and $17.7pm^2/N$, respectively, for duplex ultrasonic sensor application.

• 자원환경지질
• /
• 제39권6호
• /
• pp.675-687
• /
• 2006

이 연구에서는 청풍지역 하상퇴적물에 대한 지구화학적 특성 규명을 통해, 주성분원소 및 미량원소에 대한 청풍지역의 자연배경치를 제시하고, 지구화학적 재해에 대해 예견하고자 한다. 이를 위해 물이 흐르고 있는 1차 수계를 대상으로 하상퇴적물시료를 채취하였고, 실험실에서 자연건조 시켰으며, 화학적 분석을 위해 알루미나 몰타르를 이용하여 200메쉬 이하로 분쇄하였다. 주성분원소 및 미량성분원소는 XRD, XRF, ICP-AES, NAA를 이용하여 분석하였다. 청풍지역 하상퇴적물의 기반암에 따른 지질집단별 지구화학적 특성 비교를 위해, 화강암질편마암지역, 메타텍틱편마암지역, 다도응회암지역, 유치역암 지역, 능주용암지역으로 분류하였다. 청풍지역 하상퇴적물 전체에 대한 주성분원소 함량은 $SiO_2\;47.31{\sim}72.81\;wt.%,\;Al_2O_3 \;11.26{\sim}21.88\;wt.%,\;Fe_2O_3\;2.83{\sim}8.39\;wt.%,\;CaO\;0.34{\sim}7.54\;wt.%,\;MgO\; 0.55{\sim}3.59\;wt.%,\;K_2O\;1.71{\sim}4.31\;wt.%,\;Na_2O\;0.56{\sim}2.28\;wt.%,\;TiO_2\;0.46{\sim}1.24\;wt.%,\;MnO\;0.04{\sim}0.27\;wt.%,\;P_2O_5\;0.02{\sim}0.45\;wt.%$이다. 청풍지역 하상퇴적물 전체에 대한 미량성분원소 및 희토류원소 함량은 $Ba\;700ppm{\sim}8990ppm,\;Be\;1.0{\sim}3.50ppm,\;Cu\;6.20{\sim}60ppm,\;Nb\;12{\sim}28ppm,\;Ni\;4.4{\sim}61ppm,\;Pb\;13{\sim}34ppm,\;Sr\;65{\sim}787ppm,\;V\;4{\sim}98ppm,\;Zr\;32{\sim}164ppm,\;Li\;21{\sim}827ppm,\;Co\;3.68{\sim}65ppm,\;Cr\;16.7{\sim}409ppm,\;Cs\;72{\sim}37.1ppm,\;Hf\;4.99{\sim}49.2ppm,\;Rb\;71.9{\sim}649ppm,\;Sb\;0.16{\sim}5.03ppm,\;Sc\;4.97{\sim}5ppm,\;Zn\;26.3{\sim}375ppm,\;Ce\;60.6{\sim}373ppm,\;Eu\;0.82{\sim}6ppm,\;Yb\;0.71{\sim}10ppm$의 범위를 보였다.

• 암석학회지
• /
• 제12권3호
• /
• pp.119-134
• /
• 2003

육십령 복운모화강암은 광물학$.$지화학적으로 과알루미나 성질을 특징적으로 나타낸다. 육십령 화강암체는 1.15∼l.20 범위의 높은 알루미나 포화 지수와 2.20∼2.98wt% 범위의 높은 CIPW norm 강옥 함량을 나타낸다. 색지수는 <16%이고, FeO$^{T}$ +MgO+TiO$_2$,는 평균 1.9 wt%로서 우백질화강암에 해당한다. 육십령 복운모 우백질화강암은 SiO$_2$성분이 증가함에 따라, TiO$_2$, $Al_2$O$_3$, FeO, Fe$_2$O$_3$, MgO, CaO, $K_2$O, P$_2$O$_{5}$ , Rb, Ba, Sr 은 감소하는 경향을 나타내는 반면, Zr과 Th는 증가하는 경향을 나타내는데, 이는 장석, 흑운모, 인회석 저어콘의 분별경정작용에 기인한 것으로 해석된다. 거정질 암맥에는 SiO$_2$and P$_2$O$_{5}$ 는 높게, 그 외의 주원소는 결핍되어 나타난다. Manaslu, Hercynian 복운모 우백질화강암, Lachlan습곡대의 S-형 화강암과 비교해 보면, 육십령 복운모 우백질화강암은 낮은 Rb, 높은 Ba, Sr을 나타낸다. 거정질 암맥의 지화학적 특징은 육십령 복운모화강암을 형성했던 멜트로부터 일부 원소들의 제거 혹은 유동성에 의해 높은 Rb, Nb와, 낮은 Ba, Sr, Zr, Th, Pb 함유를 나타낸다. 육십령 복운모 우백질화강암은 총 휘토류 함량이 95.7∼123.3ppm 범위를 나타내며, 운석에 대해 표준해보면, 저 내지 중정도의 Eu 이상(Eu/Eu＊= 0.7∼0.9)을 가지면서 경희토류원소가 풍부하고 중희토류원소가 결핍된 매우 경사가 져 있는((La/Yb)$_{N}$ = 6.9∼24.8) 변화를 보여준다. 반면에 페그마틱 암맥은 총 휘토류원소의 함량이 7.0ppm으로 운석에 대해 표준화하면, 강한 부의 Eu 이상(Eu/Eu＊= 0.2)을 가진 편평한 양상을 나타낸다. 복운모 우백질화강암을 형성했던 멜트의 성분은 기원암 뿐만 아니라 기원암이 녹은 후의 잔류물질의 양에도 의존한다. 특히 CaO/$Na_2$O의 비와 Rb/Sr-Rb/Ba의 비들은 강한 과알루미나질 화강암에서는 기원암의 성분에, 즉, 기원암의 사장석과 점토 함량 비에 주로 의존한다. 육십령 복운모 우백질화강암은 사장석 성분보다 점토 성분이 풍부한 암석에서 기원한 Manaslu와 Hercynian 복운모 우백질화강암들(예를 들면 Millevaches와 Gueret)보다는 더 높은 CaO/$Na_2$O의 비와 더 낮은 Rb/Sr-Rb/Ba 비를 나타내고 있는데, 이러한 지화학적 특징은 점토 성분보다는 사장석이 풍부한 석영장석질 암석으로부터 기원했던 것으로 사료된다.

• 한국전기전자재료학회논문지
• /
• 제29권2호
• /
• pp.90-94
• /
• 2016

In this work, [$Pb(Mg_{1/2}W_{1/2})_{0.03}(Ni_{1/3}Nb_{2/3})_x(Zr_{0.5}Ti_{0.5})_{0.97-x}O_3-BiFeO_3$] (x=0.02 to 0.12) composition ceramics were fabricated by the conventional soild state reaction method and their microstructure and piezoelectric properties were investigated according to PNN substitution. The addition of small amount of $BiFeO_3$, $Li_2CO_3$, and $CaCO_3$ were used in order to decrease the sintering temperature of the ceramics. The XRD (x-ray diffraction patterns) of all ceramics exhibited a perovskite structure. The sinterability of PMW-PNN-PZT-BF ceramics was remarkably improved using liquid phase sintering of $CaCO_3$, $Li_2CO_3$. However, it was identified from of the X-ray diffraction patterns that the secondary phase formed in grain boundaries decreased the piezoelectric properties. According to the substitution of PNN, the crystal structure of ceramics is transformed gradually from a tetragonal to rhombohedral phase. The x=0.10 mol PNN-substituted PMW-PNN-PZT-BF ceramics sintered at $920^{\circ}C$ showed the optimum values of piezoelectric constant($d_{33}$), piezoelectric figure of merit($d_{33{\cdot}}g_{33}$), planar piezoelectric coupling coefficient($k_p$) and density : $d_{33}=566$ [pC/N], $g_{33}=29.28[10^{-3}mV/N]$, $d_{33{\cdot}}g_{33}=16.57[pm^2/N]$, $k_p=0.61$, density=7.82 [$g/cm^3$], suitable for duplex ultrasonic sensor application.

• 한국전기전자재료학회논문지
• /
• 제14권1호
• /
• pp.20-25
• /
• 2001

To develop the piezoelectric actuator, the structural, dielectric and piezoelectric properties and electric fieldinduced strain of the ceramics(Pb$\_$1-2/Ba$\_$x/)[Mg$\_$1/2/W$\_$1/2/)$\_$0.03/-Ni$\_$1/3/Nb$\_$2/3/)$\_$0.12/-(Zr$\_$0.5/Ti$\_$0.5/)$\_$0.85/]O$_3$(x=0, 0.01, 0.03, 0.05, 0.07, 0.1) were investigated with the substitution of Ba. The tetragonality of crystal structure and grain size decreased by the substitution of Ba. Curie temperature decreased due to the decrease of the tetragonality, and dielectric constants increased with the substitution of Ba. The coercive field, remnant polarization and electromechanical coupling factor also decreased, whereas the piezoelectric constatns d$\_$33/ and d$\_$31/ were showed the highest value of 430 and 209(x10$\^$-12/C/N), respectively, because of the increase of dielectric constant. The strain induced by 60Hz AC electric field had the maximum value of 204x10$\^$-6/Δℓ/ℓ at the substitution of Ba 3mol%. As the applied electric field approaches to the coercive field, the piezoelectric element is depolarized and the electric field induced strain revealed non-linearity.