The sensitivity of the emotion evoked visually by IAPS was attempted to be defined using EEG(electroencephalogram). Twenty university students were participated in this study. Their EEG was measured and analyzed in terms of frequency range such as delta, theta, alpha and beta wave. The results showed that alpha increased, but delta and beta decreased with positive emotional progress. Inter-variation between alpha and delta in F4 and beta variation in P3 were indicative of the evaluation sensitivity of human emotion.

When grasping a movable object or making an object move, humans feel kinesthetic sense. The kinesthetic sense is the human sense that the human feels in response to the motion acted on him. The objective of the paper is to transform the kinesthetic sense associated with the human arm into the quantified data that are useful from the engineering viewpoint. A 2-dimensional motion generator composed of two linear motors was developed to provide various motion patterns. It can change its stiffness and damping values on the real-time basis by properly regulating the force generated by the linear motors. Based on Taguchi method, the most dominant factors to affect the kinesthetic sense were investigated. Also, a reference function adequate to quantify the kinesthetic sense was found. Based on this function, the effects of changes in stiffness and damping on the kinesthetic sense were investigated. Various tests show that the damping is a more dominant factor than the stiffness in forming the kinesthetic sense.

The primary objective of this research was to establish and quantify the relationship between the physical degradation factors of multimedia telecommunications (teleconferencing) system and Subjective human perception. The research was performed in two stages. A field survey of the real users and pilot experiments were carried out in the first stage to determine customers' major complaints and corresponding system degradation factors. A prototype teleconferencing simulator was developed in two separate sound-treated chambers equipped with audio/video equipment running under a custom-developed software program. In the second stage, simulation experiments using the semantic differential methodology were performed utilizing 26 paid participants (14 college students and 12 housewives). The results indicated that audio/video synchronization and the frame rate were the main system factors for both subject groups, but different pattern of factors' influence was found according to the group, implying that the system configuration would hopefully accommodate the characteristics of the end users. Also, a single quality index, developed for system preference, was revealed to be highly correlated with user satisfaction. The results provide some fundamental data on the human subjective perception of multimedia telecommunications quality, and further can help establish the quality standards to enhance service level.

A human sensibility ergonomics design supporting system was applied to the product development for the customer's satisfaction based on ergonomics technology. The system is composed of three major subsystems such as customer's sensibility analysis, inference mechanism, and presentation technology. The main approaches of the system are to analyze customer's sensibilities and to translate them into product design elements. The purpose of this paper is to develop a design supporting system in which the relationship between customer's sensibility and product design elements is reasoned by a MADM(Multi-Attribute Decision Making) fuzzy model. In this model, three variables such as multiple correlation coefficients, partial correlation coefficients, and category scores were used in reasoning process. The weighted value of the words were also considered in fuzzy decision process. As a case study, the design supporting system with the MADM fuzzy model was applied to the personnel computer design.

Product design and development is very important process in enterprise activities. Reducing development time and reflecting consumer's needs is required to product design and development for increasing benefit and decreasing cost. Human sensibility ergonomics is one of the important technology of R&D in product development. However, the subjective method of human sensibility ergonomics has several problems to analyze and to Quantify experimental data and objective method of human sensibility ergonomics is still in process on study. In this research, new analyzing method is proposed for the subjective human sensibility ergonomics applied with fuzzy set theory. What is the useful theory for controlling uncertain type of information like human mind? This approach is more effective method for analyzing consumer's needs for product design and development process. At collecting needs, certainty scale is added for adapting hedge of fuzzy function. Using a kind of union operator, synthesize each item to analyze identification of each item with fuzzy hamming distance. Identification of analysis is classified with the relational weight using Relationship Chart Method, and is drawn the relationship diagram for clustering each item. A case study with sample test is conducted and demonstrated with this suggested method for more effective way.

This paper describes study of design specifications of restaurant/cafe signboard for new generation. Signboard is an important element in restaurant/cafe, especially for sensitive new generation, that affects image of and first impression on it. The design elements of a signboard that were chosen for analysis were background color, lettering, and letter color, which were found to have strong influences on impression of signboard in questionnaire survey. Using different combination of these design elements, fifteen samples were created for subjective evaluation. 30 pairs of adjectives which were shown to be related to signboard significantly in the first evaluation were used by fifteen subjects, twelve men and three women. Subjective evaluations were carried out by semantic differential methods, and then analyzed by using multivariate analyses. Among three design elements, the background color affected impression of signboard most significantly. The relationships between design elements (item/category) and subjective impressions were suggested using quantification theory I, which could be used as design guidelines when designing restaurant/cafe signboard with specific human sensibility ergonomic characteristics.

The objective of this study is to extract information from electroencephalogram(EEG) signals with which we can discriminate mental states. Seven university students were participated in this study. Ten stimuli based on IAPS (International Affective Picture Systems) Were presented at random according to the experimental schedule. 8-channel ($O_1$, $O_2$, $F_3$, $F_4$, $F_7$, $F_8$, $FP_1$, and $FP_2$)EEG signals were recorded at a sampling rate of 204.8 Hz for visual stimuli and analyzed. After random ten sequential stimuli presentation, the subject subjectively assessed the stimulus by scaling from -5 to 5. If the stimulus was the best and the worst, it was scored 5 and -5, respectively. Only maximum and minimum scored-EEG signals within each subject were selected on the basis of subjectively assessment for analysis. EEG signals were transformed into feature objects based on scalar autoregressive model coefficients. They were classified with Discriminant Analysis for each channel. The features produced results with the best classification accuracy of 85.7 % in $O_1$ and $O_2$ for visual stimuli. This study could be extended to establish an algorithm which quantify and classify emotions evoked by visual stimulus using autoregressive models.

This study describes the research contents, strategies, and applications of simulator for measuring and evaluating human sensibility. The simulator is the integrated experiment facility which can change the physical environment artificially to measure and grasp the reaction feature of human sensibility for the products and environments. The design technique consists of two parts; development of technique to present the mock environment related to sensibility elements and development of software to measure and evaluate sensibility physiologically and psychologically. The simulator can be utilized for evaluating the main industrial products and environments. Therefore, the simulator can increase the added-value of the product and environment, and also contribute to the improvement of quality of human life.

History of the Sensibility Ergonomics is explained. Concepts, definition, and research methods on the human sensibility are proposed for systematic applications of human sensibility studies to product and environment developments. Sensibility Ergonomics was born in socio-technological environments where consumers required aesthetic and satisfactory products in addition to useful and usable ones, and manufactures were trying to develop consumer-oriented, user-friendly products. Sensibility Ergonomics is defined as "multi-disciplinary and inter-disciplinary processes for developing products and environment as usable, comfortable and satisfactory with the information on human sensibility." Human sensibility is functionally defined as "feelings generated when perceived sensory and information stimuli are reflected from memory which has been accumulated through personal experiences." Human sensibility is affected by at least three factors: personal, social, and cultural. Consumers evaluate products in three aspects : functional, sensorial, and cultural sensibilities. Human sensibility is personal, dynamic, and ambiguous. It is generated reflectively and intuitively against external stimuli. No Physiological responses are accompanied, and one cannot control his/her sensibility. However, the sensibility affects the decision making or behavior of the person. To understand the human sensibility many inter-disciplinary methods should be used instead of one-variable approach. Micro-scopic studies such as Questionnaire, interview, behavioral analysis, and psychophysiological experiments can be performed. In addition, social and cultural studies are essential to understand an individual's sensibility. Results of sensibility studies can be applied to setup new interactions between human and machine through sensible(or affective) human-machine (computer) interfaces. Human-oriented and user-friendly products can be made with the information on human sensibility.

This study was carried out on 132 obese women who satisfied both of the conditions for the obesity: over 1.6 in Rohrer index and over 90cm in bust girth. The purpose of the study was to classify the body types of the obese women and find out their respective characteristics. The characteristics of the body shape were as follows. The one was that the height of the front waist was higher than that of the back waist. The other was that the depth of the front abdomen was high, which implies the protruding of the abdominal region. Five factors were extracted as the result of the factor analysis. Body types were classified 4 types(type 1 : long upper torso, type 2 : obese torso, type 3 : short and less upper torso, type 4 : obese arms and legs) according to the cluster analysis.

We study the ski wear which are compared at the materials and the designes and their human physiological and phychological response during exercise in a cold and air-conditioned enviroments. Five men exercises in the experiment room with four types of ski-wears : two of one-piece and two of two-piece : two of special material and two of a normal material, respectively. We keep the environment at $-5^{\circ}C$ and speed of 3.6 mile/hr during the measurement of 13 points, which is a mean model of the Muju ski-resort at January 1996. We conclude the followings : 1. The ski-wear with special materials have higher than the normal type at mean skin temperature and rectal temperature. 2. Changes of temperature withing the clothes during the exercise is small, but the humidity within the clothes abruptly increases because of the weight loss. 3. Type A ski-wear with the special material has $295.5g/m^2hr$ weight loss, which is higher, and type D ski-wear is smaller 4. The special material shows comfortable in the thermal sensation. 5. In the design aspect of the ski-wears, the two-piece type ski-wear shows higher skin temperature and temperature & humidity within the clothes than the one-piece type due to the effect of the multiplicity.