Objective: This study classified three different emotional states(boredom, pain, and surprise) using physiological signals. Background: Emotion recognition studies have tried to recognize human emotion by using physiological signals. It is important for emotion recognition to apply on human-computer interaction system for emotion detection. Method: 122 college students participated in this experiment. Three different emotional stimuli were presented to participants and physiological signals, i.e., EDA(Electrodermal Activity), SKT(Skin Temperature), PPG(Photoplethysmogram), and ECG (Electrocardiogram) were measured for 1 minute as baseline and for 1~1.5 minutes during emotional state. The obtained signals were analyzed for 30 seconds from the baseline and the emotional state and 27 features were extracted from these signals. Statistical analysis for emotion classification were done by DFA(discriminant function analysis) (SPSS 15.0) by using the difference values subtracting baseline values from the emotional state. Results: The result showed that physiological responses during emotional states were significantly differed as compared to during baseline. Also, an accuracy rate of emotion classification was 84.7%. Conclusion: Our study have identified that emotions were classified by various physiological signals. However, future study is needed to obtain additional signals from other modalities such as facial expression, face temperature, or voice to improve classification rate and to examine the stability and reliability of this result compare with accuracy of emotion classification using other algorithms. Application: This could help emotion recognition studies lead to better chance to recognize various human emotions by using physiological signals as well as is able to be applied on human-computer interaction system for emotion recognition. Also, it can be useful in developing an emotion theory, or profiling emotion-specific physiological responses as well as establishing the basis for emotion recognition system in human-computer interaction.

Objective: The purpose of this study is to evaluate the potential risk of shoulder muscle at particular working postures in sitting. Background: The cause of shoulder pain needs to be specifically studied in relation with particular shoulder postures to prevent shoulder MSDs in workplace. Method: In this study MVC, fatigue and subjective workload were investigated depending on the change of shoulder posture. An experiment was designed to evaluate the six shoulder muscles at nine shoulder postures including the combination of 30(adduction), 0, 30(abduction) degrees and 60, 90, and 120 degrees of shoulder flexion. Surface electrodes were attached to the middle trapezius, inferior middle trapezius, anterior deltoid, posterior deltoid, serratus anterior and teres major. Thirteen subjects participated in the experiment. Dependent variables were RPE (rating of perceived exertion), MVC(maximum voluntary contraction) and MPF(mean power frequency) shift by EMG (electromyography). Results: The middle trapezius and inferior middle trapezius were not significantly fatigued at all postures. The decline of MPF slope was less than 10% at all postures. The anterior deltoid was significantly fatigued all postures. The decline of MPF slope was more than 10% at all postures. The posterior deltoid was significantly fatigued 30 degrees of adduction and 90 degrees of flexion. And, neutral and 30 degrees of abduction postures were fatigued more than 90 degrees of flexion. The serratus anterior was significantly fatigued except for 30 degrees of adduction and 60 degrees of flexion posture. The teres major was significantly fatigued except for neutral and 60 degrees of flexion, 30 degrees of abduction and 60 degrees of flexion posture. Conclusion: It was found that a certain muscle was fatigued fast at particular posture compared to other muscles, which would mean that a certain shoulder muscle at particular posture could be easily exposed to the risk of musculoskeletal disorders than other muscles. Application: It is expected that the result can be applied to design workplace using shoulder muscles.

Objective: The aim of this study is to predict Korean text entry on touchscreens using ACT-R cognitive architecture. Background: Touchscreen application in devices such as satellite navigation devices, PDAs, mobile phones, etc. has been increasing, and the market size is expanding. Accordingly, there is an increasing interest to develop and evaluate the interface to enhance the user experience and increase satisfaction in the touchscreen environment. Method: In this study, Korean text entry performance in the touchscreen environment was analyzed using ACT-R. The ACT-R model considering the characteristics of the Korean language which is composed of vowels and consonants was established. Further, this study analyzed if the prediction of Korean text entry is possible through the ACT-R cognitive model. Results: In the analysis results, no significant difference on performance time between model prediction and empirical data was found. Conclusion: The proposed model can predict the accurate physical movement time as well as cognitive processing time. Application: This study is useful in conducting model-based evaluation on the text entry interface of the touchscreen and enabled quantitative and effective evaluation on the diverse types of Korean text input interfaces through the cognitive models.

Objective: This study presents the conceptual framework and the conceptual model to account for user experience by expanding the existing concepts of usability, in particular considering the user-interface environment in digital convergence. Background: To better understand a variety of users interacting with a converged product based on digital technologies, there seems to be a limit to consider the existing concepts of usability. All possible aspects of user's interaction with a product in a context of use need to be taken into consideration. Method: This study identifies the concept of user experience through a comprehensive literature review. Results: First, this study reviews the existing concepts of usability and user experience. And then this study describes four main components in the conceptual framework of user experience: user's internal states, user's external states, a product, and various outcomes, each of which encompasses distinct sub-components. The conceptual model of user experience accounts for how user's internal states change over time and for how different sub-components affect actual behavior of use. Conclusion: It is expected that these user experience concepts can be used in basic resources to better understand different behavioral characteristics of users and to better design interactive products in converged digital environments.

Objective: The aim of this paper is to inquire into the influences form factors and control types affect a search time and comfort at list menu of full touch phone. Background: Various studies have been proceeded that are related to the optimum touch area for enhancing usability of control and legibility in mobile touch device. In the environment of list menu which is widely used to provide various information effectively, however, not only comprehensive consideration for legibility and control is to be seek but also research for control type which is to scroll a list. Method: This study executed form factor experiment to inquire into the influence that font size, height of row and fixed area affect searching time and comfort in the while information processing even if the information on the list is unsorted in alphabetical order. Among the result of form factor experiment, control type experiment was executed by selecting shortest performance time, highest legibility comfort and control comfort. Control type experiment was implemented to figure out the influence which existing flicking type, scrolling bar type, newly established button page type and button raw types affect performance time and subjective comfort depending on location of the information. Results: Font size 12pt, height of row 7mm and fixed area 15mm was shortest performance time and got highest comfort and legibility score in form factor experiment. A Button page which was newly proposed type was shortest performance time and got highest comprehensive comfort in control type experiment. Conclusion: Form factor experiment showed similar results with the study through reading a long passage of character or controlling a grid icon type. However, height of row turned out to affect not only touch area for control but also legibility by ruling space between the lines. Button page type which was newly proposed showed shortest performance time and got highest comprehensive comfort. Because Button page type needs few finger movements than other control types and implements search in the fixed form, unlikely other type which list keeps moving. Application: This study should be applied in deciding form factors and control type for scroll when designing a list menu of full touch phone.

Objective: The aim of this study was to develop the assistive device for accelerator and brake pedals using bio-signals from the prefrontal lobe in the driving simulator and evaluate its performance. Background: There is lack of assistive devices for the driving in peoples with disabilities in Korea. However, if bio-signals and/or brain waves are used at driving a car, the people with serious physical limitations can improve their community mobility. Method: 15 subjects with driver's license participated in this study for experiment of driving performance evaluation in the simulator. Each subject drove the simulator the same course 10 times in three separated groups which use different interface controllers to accelerate and brake: (1) conventional pedal group, (2) joystick group and (3) bio-signal group(horizontal quick glance of the eyes and clench teeth). All experiments were recorded and the driving performances were evaluated by three inspectors. Results: Average score of bio-signal group for the driving in the simulator was increased 3% compared with the pedal group and was increased 9% compared with the joystick group(p<0.01). The subjects using bio-signals was decreased 44% in number of deduction compared with others because the device had the built-in modified cruise control. Conclusion: The assistive device for accelerator and brake pedals using bio-signals showed significantly better performance than using general pedal and a joystick interface(p<0.01). Application: This study can be used to design adaptive vehicle for driving in people with disabilities.

Objective: The purpose of this study is to find the problems of stability when people use the bassinet as an ambulatory aid for old people. Background: Many aged people use a bassinet as ambulatory aid. But the safety of using the bassinet as ambulatory aid has not been verified yet. Method: The 13 university-students who don't have musculoskeletal disorders volunteered to participate in this study. According to structural analysis of the both tools, we compared the structural stability of an outdoor rollator with the structural stability of a bassinet. And when the participants walked using both tools, the motions were captured and analysed. We measured the angle of shoulder joint and the angle of trunk from the ground when the participants were walking. And we found the distance from participants' pressure cone apex and greater trochanter. Results: Following the structural analysis, the bassinet has the lower structural stability than the outdoor rollator. When the people used the bassinet as ambulatory aid, the angle of the shoulder joint was bigger than to use the outdoor rollator. The angle of trunk wasn't different between the outdoor rollator and the bassinet. And distance from pressure cone apex to greater trochanter was far to use the bassinet than to use the outdoor rollator. Conclusion: Through the structure analysis and gait analysis of the bassinet and the outdoor rollator, we can be aware of that the bassinet has problem of stability. Therefore the people who use the bassinet as an ambulatory aid, especially supporting body weight, may be hurt due to the problems of stability. Application: This research can be used for developing a study of the ambulatory aid and preventing the accident when the aged people use the ambulatory aid.

Objective: The aim of this study was to determine the effect of abdominal-compression belt in one leg standing on balance in normal adult. Background: With the effects of increased intra-abdominal pressure, the abdominal-compression belt is contributing to a static balance control. However, specific study is still insufficient. Method: Forty subjects were randomly allocated to two groups: control(n=20) and experimental group(n=20), respectively. The experimental group used an abdominal-compression belt, whereas the control group did not that. All subjects were educated using pressure biofeedback unit and ultrasound imaging for exact application by abdominal-compression belt. Main outcome measurement was used a general stability index, fourier harmony index, weight distribution index, and fall index in tetrax balance system. Results: Experimental group improved significantly on general stability, only 2 factors(eyes closed with head turned forward and eyes closed with head turned backward) among fourier harmony index, and fall index, However, weight distribution index did not revealed significant difference. Conclusion: The findings suggest that application of abdominal-compression belt could be effective on improving balance ability in one leg standing of normal adults. Application: The results of the abdominal-compression belt might help to control balance in workers.

Objective: The aim of this study is to evaluate the accuracy and reliability of Spine-Pelvis Monitor(SPM) that was developed to measure 3-dimensional motion of spine and pelvis using tilt sensor and gyro sensor. Background: The main cause of low back pain is very much associated with the task using the low back and pelvis, but no measurement technique can quantify the both spine and pelvis. Method: For testing the SPM, 125 angles from three anatomical planes were measured three times in order to evaluate the accuracy and reliability. The accuracy of SPM in measuring dynamic motion was evaluated using digital motion analysis system. The motion pattern captured by two measuring methods was compared with each other. In result, the percentage error and Cronbach coefficient alpha were calculated to evaluate the accuracy and reliability. Results: The percentage error was 0.35% in flexion-extension on sagittal plane, 0.43% in lateral bending on coronal plane, and 0.40% in twisting on transverse plane. The Cronbach coefficient alpha was 1.00, 0.99 and 0.99 in sagittal, coronal and transvers plane, respectively. Conclusion: The SPM showed less than 1% error for static measurement, and showed reasonably similar pattern with the digital motion system. Application: The results of this study showed that the SPM can be the measuring method of spine pelvis motion that enhances the kinematic analysis of low back dynamics.

Objective: The aim of this study is developing the navigation radar display of navy ship with ecological interface design (EID) framework. Background: Navy ship radar operator must perform navigation support tasks by monitoring the complex and diverse information presented on the radar display. Current radar display is limited in effective navigation aid and response to an unusual state immediately. It is necessary to develop an effective radar display. Method: Ten navy radar operators performed a series of trials in a low-fidelity radar simulation in which they attempted to solve the problems of current navigation situation. Results: The result demonstrated that the ecological interface's performance was better than the existing radar display on performance time and subjective mental workload. Conclusion: This study expand EID study field to navy ship radar display and confirm ecological display is better than existing radar display in performance time, subjective mental work load. Application: The result of this study may help to improve navy ship navigation radar display currently in use.

Objective: The objective of this study is to analyze standards of ISO 9001, ISO 14001, KOSHA 18001, GAP and ISO 22000 to make an integrated system and check whether an integrated system can be used at small size companies. Background: There are many certification criteria for quality, safety and health such as ISO 9001, ISO 14001, KOSHA 18001, GAP and ISO 22000. However, these criteria are difficult and complicated to be used at a small size company. Thus. it is not easy for small size companies to obtain certifications using these criteria. But customers and workers of small size companies want the key points of these systems to be implemented. Method: ISO 9001, ISO 14001, KOSHA 18001, GAP and ISO 22000 were analyzed to find the commonality and duplications as well as the importance of the items in these standards. And a survey was conducted to check whether certain aspects of the anticipated integrated system can be implemented at small size companies. Results: Items were classified into categories based upon the importance to food safety, quality, safety, environment, and health. Items which are common among standards were also identified and thus give ideas to make the new standards simpler than the currently available standards. Items which were important but may not be easily implemented at the small size companies were also identified. Conclusion: By considering the fact that the currently used accreditation standards have many similar aspects, these systems can be integrated into one new system which small size companies can use relatively easily.

Objective: The aim of this study is to investigate effect of driver's cognitive distraction on driver's physiological state and driving performance, and then to determine parameters appropriate for detecting the cognitive distraction. Background: Driver distraction is a major cause of traffic accidents and poses a serious threat to traffic safety due to ever increasing use of in-vehicle information systems and mobile phones during driving. Cognitive distraction, among four different types of distractions, prevents a driver from processing traffic information correctly and adapting to change in surround vehicle behavior in time. However, the cognitive distraction is more difficult to detect because it normally does not involve significant change in driver behavior. Method: A full-scale driving simulator was used to create virtual driving environment and situations. Participants in the experiment drove the driving simulator in three different conditions: attentive driving with no secondary task, driving and conducting secondary task of adding numbers, and driving and conducting secondary task of conversing with an experimenter. Parameters related with driver's physiological state and driving performance were measured and analyzed for their change. Results: The experiment results show that driver's cognitive distraction, induced by secondary task of addition and conversation during driving, increased driver's cognitive workload, and indeed brought change in driver's physiological state and degraded driving performance. Conclusion: The galvanic skin response, pupil size, steering reversal rate, and driver reaction time are shown to be statistically significant for detecting cognitive distraction. The appropriate combination of these parameters will be used to detect the cognitive distraction and estimate risk of traffic accidents in real-time for a driver distraction warning system.

Objective: This study developed a new shower carrier prototype to reduce caregivers' muscle burden and to increase use convenience by reflecting the needs of domestic long-term care institutions. Background: In the long-term care institutions, one of the ADL(Activities of Daily Life) factors is bathing/showering. Recently, bath/shower-assisting equipment is actively being introduced in care institutions to reduce the caregivers' care cost, but most of the domestic equipment was designed to imitate foreign products and rarely reflected the needs of care institutions. Method: Based on Korean elderly people's body information, the bed size(length: 1,900mm, width: 650mm) was set-up, and a variable headrest with a newly designed headform was developed to provide the comfort for the elderly and convenience for caregivers. To reduce caregivers' muscle burden on transferring and showering activities, a 3-step column lifting module equipped with dual actuators(lowest/highest levels from the ground: 600/1,100mm, Stroke: 500mm) was developed, and the wheelbase parameter(length: 1,250mm, width: 580mm) was defined securing the turn-over safety of the shower carrier. The drivability tests were performed for the prototype and foreign product, and the male and female subject's muscle activities were measured through the tests. Results: The structural stability of the shower carrier prototype was secured by finite element analysis, and the muscle activities of the subjects through the drivability tests largely decreased in the prototype, compared to the foreign product. Conclusion: In this study, a new shower carrier prototype was developed to possibly reduce caregivers' muscle burden and to increase use convenience based on the needs of long-term care institutions. It was expected that the drivability performance of the prototype could be relatively superior to that of the foreign product. Application: The results obtained from the study can be applied for the optimal development of a shower carrier including other equipment to effectively care for the elderly.

Objective: The aim of this study is to design an auto showering system regarding bed type for old people or bedridden patients. Background: The rapid growth concerning the aging population leads to an increase in elderly bedridden patients living in senior care centers and hospitals where care givers have difficulty bathing older people with limited mobility. Method: In this study, a showering equipment for experiment was based on anthropometric and researching existing products. The nozzle position was optimized by showering tests and simulations using showering equipment. Results: The problems regarding the existing products were analyzed and the nozzle position was optimized through showering tests. The number, position, and spraying angle of the nozzle were optimized through showering simulations. The automatic showering system concerning bed type was designed by considering their results. Conclusion: When designing an automatic showering system, the most important design element involves determining the position of nozzle and angle of water injection and the number of nozzles. The system was developed by applying the results through user centered-research. Application: The user centered-research for developing products was applied directly in order to develop automatic baths, showering products etc. Furthermore, it was also available to be applied towards senior friendly products.

Objective: The aim of this study is to determine legible Korean font sizes within in-vehicle information systems(IVISs) in diving conditions. Background: Font legibility within IVISs is one of important causes on its' safe operations during driving. Several researches proposed some guidelines on the legible English font sizes within IVISs. On the contrary, appropriate Korean font sizes have been hardly known in spite of the typological differences between English and Korean. Therefore, more systematic researches for improving the legibility on Korean font size within IVISs have been required. Method: In this study, an experiment was performed with the following experimental factors: the existence of vibration, the color contrasts(white on black, black on white), the font types(HDR, CubeR, Gothic), and the font sizes(6, 8, 10, 12, 14, 16, 18, 20, 22, 24pt). To fit the experimental conditions into real driving environments, the illuminance was controlled to 15lx by using LED lamp and the distance between IVIS and participants was kept to 70cm. Moreover, all participants took the shutter glasses for employing well-known occlusion techniques. Results: The experimental results showed that 'HDR' and 'Non-vibration + Black on white' group took the shortest response time, and decreasing slopes of the response time with increasing font sizes were slowing down at 14pt then flattened out at 22pt regardless of the existence of vibration and color contrasts. Conclusion: The minimum size for legible Korean font would be about 14pt(5.47mm) and the optimum size would be about 22pt(8.59mm). Application: The guideline on the Korean font sizes from this study will be applied to design an IVIS in the future.

Objective: The objective of this paper is to examine the scope of ergonomics in relation to the discipline of industrial hygiene. Background: There has been increasing recognition of the importance of ergonomics in the practice of industrial hygiene. As a result, quite a number of ergonomics-related research articles have been published in major industrial hygiene journals. And the professional engineers in industrial hygiene have conducted ergonomics-related activities. Method: This paper reports the results from the literature review of the ergonomics papers published in major industrial hygiene journals for the last 5 years, and the certification of industrial hygiene and ergonomics. Results: It was found that 7.7~13% of the total published papers were about ergonomics, and the number of the professional engineers in industrial hygiene is almost double of that of ergonomics. Conclusion: It should be understood that the work of ergonomic is complementary to industrial hygiene and not in competition with it. Application: Some suggestions were proposed hopefully helpful to colleague ergonomists for future research.

Objective: This study presents an observation and analysis on behavioral characteristics of old users in comparison to young users in the use of control on display interface. Background: Touch interface which allows users to control directly on display, is conceived as delight and easy way of human-computer interaction. Due to the advantage in stimulus-response ensemble, the old users, who typically experiencing difficulties in interacting with computer, would expected to have better experience in using computing machines. Method: Twenty nine participants who are over 50 years old and 14 participants who are in 20s years old were participated in this study. Three primary tasks in touch interface, which are tap, move, and flick, were delivered by the users. For the tap task, response time and point of touch response were collected and the response bias was calculated for each trial. For the move task, delivery time and the distance of finger movements were recorded for each trial. For the flick task, task completion time and flicking distance were recorded. Results: From the collected behavioral data, temporal and spatial differences between young and old users behavior were analyzed. The older users showed difficulty in completing move task requiring eye-hand coordination.