Injury mechanisms of lower extremity injuries in motor vehicle accidents are focused on fractures, sprains, and contusions. The purpose of this study is to evaluate the analysis of lower extremity injury mechanism in occupant motor vehicle accident by using Hospital Information System (HIS) and reconstruction program, based on the materials related to motor vehicle accidents. Among patients who visited the emergency department of Wonju Severance Christian Hospital due to motor vehicle accidents from August 2012 to February 2014, we collected data on patients with agreement for taking the damaged vehicle's photos. After obtaining the verbal consent from the patient, we asked about the cause of the accident, information on vehicle involved in the accident, and the location of car repair shop. The photos of the damaged vehicle were taken on the basis of front, rear, left side and right side. Damage to the vehicle was presented using the CDC code by analytical study of photo-images of the damaged vehicle, and a trauma score was used for medical examination of the severity of the patient's injury. Among the 1,699 patients due to motor vehicle crashes, 88 (5.2%) received a diagnosis of lower extremity fracture and 141 (8.3%) were the severe who had ISS over 15. Nevertheless during 19 months for research, it was difficult to build up in-depth database about motor vehicle crashes. It has a limitation on collecting data because not only the system for constructing database about motor vehicle crash is not organized but also the process for demanding materials is not available due to prevention of personal information. For accurate analysis of the relationship between occupant injury and vehicle damage in motor vehicle crashes, build-up of an in-depth database through carrying out various policies for motor vehicle crashes is necessary for sure.

According to DEKRA (a Germany Certification and Inspection Agency)'s accident rate analysis by vehicle defect factor, as a result of analysis of the causes of accidents by flaws, it was found that braking devices accounted for 41%. Defects in the braking system are closely related to the accident, so it is very important to find faulty brking systems to ensure safety. The EU and USA uses ISO brake tester and the Korea is brake teater is first introduse in Japan for vehicle inspection and maintanance. KOTSA introduce the ISO brake tester in order to promote the advanced standardization of the inspection equipment and inspection tecnology, and examined the detection characteristics and applied it to the improvement direction of the brake tester to secure the driving safety.

Due to the rapid increase in the number of vehicles, the physical and human losses caused by traffic accidents have become serious social problems. In the global trend, there have been active studies conducted on improving safety level of automobile in order to reduce the number of automobile accident. As a result of such research, traffic accidents continue to decline. In the case of South Korea, however, rate of death by automobile accident is 8.5 per 10,000 people and it is a seven rank among the countries in OECD (Organization for Economic Cooperation and Development). This average rate is almost double compared to average automobile accident rate per 10,000 vehicles, of other OECD countries in 2015. Consequently, many studies and policies currently have been conducted and made for increasing safety of pedestrians; however, they are only emphasizing characteristics of pedestrians and drivers. For this reason, this study suggests scenarios for establishment of test standard corresponding with domestic environment and international standard of AEB (Autonomous Emergency Braking) and conducts a real car test by scenarios by setting up a goal with a function for remaining distance after braking and then examine equation by comparing real car tests results and outcome after calculation. This is a theoretical method to predict a relative remaining distance after AEB prior to conducting a real car test for evaluation of safeness of automobile with AEB and it is expected that it solves problem of complication of real car test.

Recently, the automobile industry has developed ADAS (Advanced Driver Assistance System) to prevent traffic accidents and reduce driver's driving burden. Among the ADAS, the LKAS (Lane Keeping Assistance System) is a support system for the convenience and safety of the driver, and the main function is to maintain the driving lane of the vehicle. LKAS is a system that uses radar sensor and camera sensor to collect information about the position of the vehicle in the lane and to support keeping the lane through control if necessary. In many countries, LKAS has already been commercialized and the convenience and safety of drivers have been improved. The international LKAS evaluation test procedure is being developed and discussed by standardization committees such as the ISO (International Organization for Standardization) and the Euro NCAP (New Car Assessment Program). In Korean, the LKAS test method is specified in the KNCAP (Korean New Car Assessment Program), but the evaluation method is not defined. Therefore, the LKAS test procedure that meets international standards and is suitable for domestic road environment is necessary. In this paper, development of LKAS test evaluation scenarios that meets international standards and considering domestic road environment, and the formula that can evaluate the result value after control as the relative distance of lane and the front wheel are suggested. And a comparative analysis was conducted to verify the validity of the suggested scenario and formula. The test evaluation was conducted using the vehicle equipped with the LKAS.

Currently, a lot of researches about high risk test scenarios for autonomous vehicle and advanced driver assistance systems have been carried out to evaluate driving safety. This study proposes new type of test scenario that evaluate the driving safety for autonomous vehicle by reconstructing accident database of national automotive sampling system crashworthiness data system (NASS-CDS). NASS-CDS has a lot of detailed accident data in real fields, but there is no data of accurate velocity in accident moments. So in order to propose scenario generation method from accident database, we try to reconstruct accident moment from accident sketch diagram. At the same step, we propose an accident of occurrence frequency which is based on accident codes and road shapes. The reconstruction paths from accident database are integrated into evaluation of simulation environment. Our proposed methods and processor are applied to MILS (Model In the Loop Simulation) and VILS (Vehicle In the Loop Simulation) test environments. In this paper, a reasonable method of accident reconstruction typology for autonomous vehicle evaluation of feasibility is proposed.

Some local government, community rehabilitation center, special school operate buses which can be used by wheel chair user in order to commute. However, there are no regulations or laws for safety management of buses and its wheel chair lifts. To prevent discrimination among the physically challenged people, government of Korea plan to supply buses which wheel chair users are able to on board. Safety management system should be prepared to ensure safe and convenient use of express and intercity buses for wheel chair users. In this study, domestic and international standards and regulations of wheel chair lift are thoroughly reviewed and based on this research, national safety standards for wheelchair lift are suggested for the future.

While the advanced trffic environment systems are developed recently, the traffic systems for transportation vulnerable are still under development and their social life are limited as well. In order to the secure their mobility rights, it had been required to set up the particular system for the traffic welfare. One of the significant items is the express bus operation for wheelchair users. Thus, the research of development and operation for express buses with wheelchair users was funded by the Korean government. Before the express bus development for wheelchair users based on the current bus model, this study set up the evaluation method for the bus rollover characteristics to ensure occupant safety using the finite element method. The partial bus model was developed corresponding to the full bus model response under rollover event and the evaluation method based on two model (full bus model and partial bus model) responses is planned to apply the model development of express bus modification for wheelchair users.