The fundamental philosophy underlying the seismic design of structures and systems are evolving into the performance based concept. The background and current status of this development in other countries are briefly summarized. The new code system which consists of two level seismic design criteria will be introduced. The implementation of the preformance based design concepts in the criteria will be explained.

It has knows that the seismicity of the Korean Peninsula is relatively inactive than those of adjacent northern China and southwestern Japan. Recently the review of long term historical records and recent seismicity. In addition, it is considered that the modern society is more vulnerable to seismic hazard because of high urbanization and industrialization. From this viewpoint, the improvement and modification of the present regulation for aseismic design is strongly proposed. The purpose of the present study is to prepare seismic hazard maps for Korea to be used in improving the present regulation. The present study was performed as a cooperative project of eight Korean seismologists. Each seismologist calculated independently seismic hazard value at the given grid points based on his own judgement about methodology and seismicity. Then the values are unified with equal weight to produce a seismic hazard map. Seven seismic hazard maps for peak acceleration with 10 percentile probability of exceedance in 5, 10, 20, 50, 100, 250, 500 years are presented. This probability of exceedancd in such years corresponds to return period of 48, 95, 190, 475, 950, 2373, 4747 years, respectively. It is recommended to use a hazard map to be selected on the basis of the importance and the design level of structures.

The seismic risk in Seoul Metropolitan Area(latitude 37.0$^{\circ}$~37.8$^{\circ}$, longitude 126.5$^{\circ}$~127.5$^{\circ}$)based on all Korean earthquake data of Modified Mercalli Intensity equal to or greater than V is evaluated by extreme value method and point source method. The seismic risk estimated from all data turned out to be lower than from the data since the Chosen dynasty during which seismic data appear to be rather complete. The damaging earthquake of park horizontal ground acceleration grater than 0.1g turns out to occur with 90% probability of being exceeded in 200 years when the data since the Chosen Dynasty are used.

Most large strike-slip faults do not rupture their entire length during single faulting but generally break in segments which are different in location and time of faulting. Studies related to the development of the Yangsan fault have been reported based on partial results from characteristics of geolgocial distribution, geophysical prospecting and paleostress analyses. This paper shows, based on preliminary results, that the Yangsan fault could be divided into four structural areas along entire length. These areas are different in geological distribution, bedding attitude measured from sedimentary rocks, strike of main fault, geometry of small faults, termination types of fault tips, cyclic variation of fault zone width, and arrangement of paleostress. Therefore, the Yangsan fault could be divided into at least four segments.

All of the Tsumami which affected severly the east coast of the Korean Peninsula in the years 1741-1993 are caused by earthquakes occurred along the boundary sea of Japan and norther Honshu. These earthquakes with magnitude greater than 7.0 are results of relative movement between the North American Plate and Urasian Plate. The active fault along the boundary of the two plates is attracted by many researchers since the 1983 May earthquake of magnitude 7.7. It is important to anticipate when the next large earthquake will occur and how much it affect the east coast of Korea. Among a few models of spatial seismic gap were proposed for earthquake occurrences accompanying Tsunami, Ishikawas' east-west seismic gap model is the most probable one. There is a tendency that the period between the activities of the active faults becomes shorter. It is expected that a large earthquake of magnitude 7.0 or above will occur along the eastern boundary of Japan Sea at the end of this century and produce Tsunami at the east coast of Korea.

The intesity survery on the 26 June 1997 Kyeongju Earthquake whose magnitude is 4.3, has been made for 316 locations throughout southen park of Korean Peninsula, then we have investigated the intensities distribution of the earthquake. Because the earthquake was occurred during night time (03:50:23.19), the most people who live farather than about 200km from the epicenter did not feel the earthquake. Therefore, the intensities are estimated only from IV to V in this study. The iso-seismal intensity map shows that the shape of iso-seismal intensity is similar to the boundary of the Kyeongsang Basin. This phenomenon may indicates that the energy of the earthquake is trapped within the Kyeongsang Basin due to low velocity within the basin compared with the velocity outside of the basin. The travel time curves with 10 possible phases are used to identify the earquake records. The Pg and Sg phases are crearly shown in the records whose epicental distance is less than 60 km. The records of MUN and PCH stations located outside of the Kyiongsang Basin show different frequency compared with that of the other stations located within the Kyeongsang Basin.

Due to aging of the imported seismic monitoring system of Uljin 1＆2 units it is difficult for this system to provide enough functions needed for the security of seismic safety and the evaluation of the earthquake data from the seismic instrumentation. For this reason, it is necessary to replace the seismic monitoring system of Uljin 1＆2 units with an upgraded system with corresponding softwars. With operation of this system which incorporates the man-machine interface technology, the operators in nuclear power plant can rapidly and correctly determine the exceedance of Operating Basis Earthquake.

The purpose of this study is to evaluate the seismic response characteristics of Wolsong nuclear power plant (NPP) structures for the Kyeongju earthquake(ML=4.3) occurred on June 26, 1997. The seismograms are obtained from five accelerographs of nuclear power plant at Wolsong, Kyeongbuk. The distance from the epicenter is about 25km. The peak acceleration (PA) due to the earthquake is 0.0235g, which is far lower value than that of design basis earthquake(DBE). The PA at the containment wall is about twice as large as that at free field. Also, the higher the accelerograph is located in, the larger the PA is measured to be From the response spectrum analysis, the dominant frequency of the response is close to 4 Hz, which is similar to the free field is poor because of contamination by high frequency waves as a result of reflection and diffraction between ground and NPP structure. We are of opinion that the accelerograph at the free field should be moved approximately twice the building dimension away from the containment structure.

A pair of piezoelectric transducers was developed for geotechnical site characterization in rock materials. SH-wave measurement capability of the transducers can provide a more complete characterization. The performance of the transducers was tested at a limestone site.

The contiguous or adjacent foundations are always coupled through the soil. Hence their behavior is quite different due to the interaction effects between or among the foundations. The interaction effects can be very pronounced if the distance between them is very close. An 3-D homogeneous strip hyperelement is developed to analyze the dynamic interaction between rectangular or irregular shape found ations. The effects of interaction on the dynamic behaviors of the adjacent rigid rectangular foundations. The effects of interaction on the dynamic behaviors of the adjacent rigid rectangular foundations. The effects of interaction on the dynamic behaviors of the adjacent rigid rectangular foundations resting on the surface of a stratum are stratum are studied using the newly developed method.

ABSTRACT This paper presents results of parametric studies of the seismic responses of a reactor containment structure on layered base soil. Among the numerous parameters, this study concentrates on the effects of embedment of structure to the base soil, thickness of the soil layers, stiffness of the base soil, and the definition point of the input motion. For the analysis, a substructure method using frequency independent impedances is adopted. The method is based on the mode superposition method in time domain using the composite modal damping values of the SSI system computed from the ratio of dissipated energy to the strain energy for each mode. From the study results, the sensitives of each parameter on the earthquake responses have been suggested for the practical application of the substructure method of SSI analysis.

Recently, the ground motion occurred by vehicles or trains has been recognized one of the major factors of damage of structures nearly the motion source. To isolate the environments from ground motions, it is necessary to understand the wave propagation in half spaces. Especially, Rayleigh wave is the primary concern because it transmits a major portion of the total source energy and decays the energy more slowly with response to distance than the other waves. In this study, the preliminary data(wave length and damping effect) to design the isolating system are obtained. For this, a field dynamic test is performed, using the exciter which can generate the 100kN vertical cyclic load in the range of 1-60 Hz is used. The fifteen accelerometers to measure the ground response are set up in 3 radial direction at intervals of 10 meters in each row. The wave lengths are calculated using the distance and the phase between the measuring points. The damping effects of the Rayleigh-wave are also observed from the experiments.

The influence of the dam-reservoir interaction on the seismic response of concrete dam is studied. The dam body is assumed to behave elastically and modeled by FEM. The impounded water is assumed to be inviscid and compressible fluid and modeled by BEM. The seismic response of dam-reservoir system is analyzed by coupling two regions : the dam body and reservoir.

Based on the Green's function technique, an analytical approach is developed to examine the surface wave screening effectiveness of composite wave barriers. The composite barrier consists of a high velocity layer sandwiched between two thin layers of low shear velocity materials. The high velocity layer is represented by differential matrix operators which relate the wave fields on each side of the layer. The low velocity layers are modeled by non-rigid contact conditions which allow partial sliding at the interfaces. Screening ratio of barriers with various combination of material, geometric, and non-rigidness parameters are compared and discussed in some detail.

Generally, the problem of vertical vibration of structure is generated slab. Analysis of space framed structures with slab for vertical vibration requires more efficient modeling and analysis technique, because number of elements lead to more complicated model with many degree of freedom which requires large amount of computing resources for dynamic analysis. This paper propose an efficient analysis method for vertical vibration of space framed structure with slab. At first, proposed model is selected minimum joints and degree of freedom which are acquired sufficient dynamic response to the vertical vibration. Secondly, super-elements that are made a number of element are used for simple input data and fast analysis.

The main concern of numerical dynamic analysis of large structures is to find an acceptable solution with fewer mode shapes and less computational efforts. component mode method utilizes substructure technique to reduce the degrss of freedom but have a disadvantage to not consider the dynamic characteristics of loads. Ritz Vector method consider the load characteristics but requires many integrations and errors are accumulated. In this study, to prove the effectiveness of component mode method, Lanczos algorithm are introduced. To prove the effectiveness of this method, example structures areanalyzed and the results are compared with SAP90.

The purpose of this thesis is to derive a theoretical model of the hysteretic resistance of the visco-elastic damper based on test results of harmonic excitation and to investigate of the basis of theory and experiment the effect of vibration control and response characteristics of portal frames degree vibration systems provided with the damper. The behaviour of a visco-elastic degree under dynamic loading is idealized by a model of the theory of visco-elasticity, i.e. a four-parameter model formed as a parallel combination of Maxwell fluid and Kelvin-Voigh models and its constitutive equation is derived. The model parameters are determined for a tested damper from the datas of harmonic excitation tests. The theoretical model of the damper is incorporated in equation fo motion of single degree of freedom. A computer program for solving the equation is written using Runge-kuttas's numerical integration scheme. Using this analysis program test cases of the earthquake excitation are simulated and the results of the simulation are the results of the simulation are the results of the simulation are compared with the test results.

Viscoelastic dampers have been successfully applied in building structures to reduce vibration by wind and earthquakes. It may be inefficient or be uneconomical that viscoelastic damper is installed at each story of building structures. Although the number of viscoelastic dampers is reduced, if viscoelastic dampers are installed at only suitable places in building structures, vibration would be controlled by efficiency. In this paper, responses of building structures according to the situation of viscoelastic dampers are compared. Then efficient and economical arrangements of viscoelastic dampers are proposed.

The characteristic tests of reduced-scale high damping and lead rubber bearings are performed by changing the shear displacements and the vertical loads. The test frequency is 0.5Hz. Test results show that the shear stiffnesses obtained for both bearings are less than target values, but the damping values are greater than the targets. The shear stiffness and damping of lead are larger than those of high damping bearings. The shear-deformation characteristic values such as stiffness, damping and yield load values are changed according to the level of design vertical loads.

Many uncertainties are found in the evaluation of historical eatrhquake records. The seismic response characteristics of a three-bay-straw-roof house which is a typical from of residence in ancient period is quantitatively estimated. Two 1:4 scaled models are used in the test Real earthquake time histories for rock and competent soil conditions are used.

Current seismic design code is based of the assumption that the designed structures would be behaved inelastically during a severe earthquake ground motion. For this reason, seismic design forces calculated by seismic codes are much lower than the forces generated by design earthquakes which makes structures responding elastically. Present procedures for calculating seismic design forces are based on the use of elastic spectra reduced by a strength reduction factors known as "response modificaion factor". Because these factors were determined empirically, it is difficult to know how much inelastic behaviors of the structures exhibit. In this study, base shear forces required to maintain target ductility ratio were first calculated from nonlinear dynamic analysis on the single degree of freedom system. And then, base shear foeces specified in seismic design code compare with above results. If the strength(base shear) required strength should be filled by overstrength and/or redundancy. Therefore, overstrength of moment resisting frame structure will be estimated from the results of static nonlinear analysis(push-over analysis).analysis).

In most seismic codes such as the Uniform Building Code(UBC), the response modification factor(or the force reduction factor)is used to reflect the capability of a structure in dissipating energy through inelastic behavior. The response modification factor is assigned according to structural system type. Ductile systems such as special moment-resisting steel frames are assigned larger values of the response modification factor, and are consequently designed for smaller seismic design forces. Therefore, structural damage may occur during a severe earthquake. To ensure safety of the structures, the suitability of the response modification factor used in aseismic design procedures shall be evaluated. The object of this study is to develop a method for the evaluating of the response modification factor. The validity of the evaluating method has been examined for several cases of different structures and different earthquake excitations.

The seismic performance of R/C frame structure designed for gravity load investigated in this paper. The investigation shows a satisfactory seismic performance against moderate earthquakes but column sway failure mechanism against severe earthquakes. Capacity design method is employed to redesign the R/C frame to improve seismic performance. This study provides an insight an insight into seismic upgrading methodology for medium rise R/C frame structures designed gravity load.

One way in which a comparison can be mode between various reinforced concrete structures is to compare the rate of energy absorption capacity. It is useful to use a well-known standard hysteretic rule as a benchmark for comparisons. The concept of energy absorption efficiency with respect to an elaste-perfectly plastic (EPP) system has been adopted. The normalized cumulative energy, cumulative plastic drift and energy response spectra are used for the method. The previous study using the energy spectra developed by Chang and Mander (1994) indicates the cumulative plastic demand for most earthquakes to be 0.1 rad., but a conservative upper bound of 0.2 rad. could be expected for a maximum credible earthquake. From the present study, the energy absorption efficiency in R.C. structures with respect to the EPP system may range in 30%-45% for most cases.