An estimation of seismic risk parameters by seismic zones of the Korea Peninsula in order to calculate the seismic hazard values using these was erformed. Seven seismic source zones were selected in consideration of seismicity and geology of Korean Peninsula. The seismicity parameters that should be estimated are maximum intensity, activity rate and b value in the Gutenberg - Richter relation. For computation of these parameters, least square method or maximum likelihood method is applied to the earthquake data in two ways; the one for the data without maximum intensity and the other with maximum intensity. Earthquake data since Choseon Dynasty is regarded as complete and estimation of parameters was made for these data using above two ways. And recently, a new method is published that estimate the seismicity parameters using mixed data containing large historical events and recent complete observations. Therefore, this method is applied to the whole earthquake data of the Korean Peninsula. It turns out that the b value computed considering maximum intensity is slightly lower than that computed considering without maximum intensity, and it becomes still lower when the incomplete data prior to Choseon Dynasty is used. In the case of the activity rates, the values obtained without maximum intensity and that with maximum intensity are similar, though they are lower when the incomplete data is used. The values of maximum intensities are usually lower when considering incomplete data. In the seismic source zone including the Yangsan Fault zone, however, the values are higher when considering the incomplete data.

In this study, statistical analyses implemented in the EPRI EQHAZARD programs were employed to estimate the sismicity parameters in the Korean peninsula based upon an combined Korean earthquake catalog. The combined earthquake catalog was prepared by performing earthquake clustering analysis on the collected earthquake catalogs provided by experts of the seismic panel during the PSA for Yonggwang Units 1 & 2. The duplicate earthquake events and secondary events in earthquake clusters have been successfully screened. The resultant earthquake catalog was analyzed to quantitatively assess the incompleteness of the earthquake catalog for specified earthquake magnitudes and time periods. The result shows that the earthquake catalog of the Korean peninsula is complete for the times periods of 1392 ~ 1750 and 1905 ~ 1989 (AD) and earthquake magnitude above 4.5. The PSHA methodology of EQHAZARD features the estimation of inhomogeneous a-and b-values within a seismic source. This study shows various results of a-and b-value is well constrained lying between o.6 and 1.0. Also the confidence of estimated a-and b-value for a specifed location was assessed by quantifing the uncertainty of these parameters using bootstrap simulation.

The objective of the study is to develop attenuation equations of groud motions in the southern part of the Korean Peninsula. The earthquake source characteristics and the medium properties were estimated from available instrumental earthquake records and used as input parameters. The peak ground accelerations (PGA) and pseudo-velocty response spectra(PSV) were simulated by the random vibration theory. The attenuation equations for the PGA were constructed in terms of local magnitudes and hypocentral distances.

A seismic attenuation formula is derived from the intensity maps of medium sized four earthquakes that occurred in the southern part of Korean peninsula. In order to obtain the seismic attenuation formula, the the coefficients of four attenuation equations representing the intensity maps are integrated using the proper weighting factors depending on the credibility of the data are assigned to. The proposed formula shows the trend of attenuation similar to the ones for the Eastern North America for the region within the epicentral distance of 200km, but produces higher attenuation at farther distances. Though the attenuation curve is not derived from the instrumental data, the result could be a useful tool for the analysis of seismic hazard in Korean peninsula.

Becaruse of the continual occurrence of minor and moderate earthquake in Korean peninsula, it is generally considered that Korean is nor located in safe region against probable earthquake and more, even though being recognized as a safe contry in earthquake. It is in particular noted that nowadays there has been much concern about undesirable disaster due to unexpected earthquake since the disaster of 1995 Kobe earthquake. Thus, the objective of this research is to develop appropriate design spectrum which could be practicably used in seismic design of important structures taking into consideration of local physical characteristics. Particularly, we have to keep in mind the lessons from 1985 Mexico earthquake which had disregarded deep research on local ground conditions, being a possible magnification phenomena of ground motions in weak soil layer. Various spectra has been described based on the analysis of historical earthquakes, and appropriate design spectrum has been proposed herein.

A purpose of this research is to develope the calculation methods of design input seismic loads, Where, calculation methods are ; (1) Considering different recurrence period of earthquakes which was proposed by ATC 14. (2) Using earthquake records which was modified Korean codes. Responce spectra that was adopted by codes has an estimated recurrence interval of 500 years, with approximately a 90 percent probability of not being exceeded in 50 years. But If we considered the life-time of existing buildings in some cases, response spectra be modified with return period of earthquakes. If we be design highrise and irregular buildings, dynamic analysis method that use time history records should be used. But in Korea, time history records of earthquakes was very few. Therefore to use foreign countries's earthquake record, it is need to select of records considered Korean coeds. As a results, this study propose a calculation method of seismic design input loads that considered return period of earthquakes and also propose using method of earthquakes.

The Chirisan earthquake occurred on July 4, 1936 was the largest earthquake known to have occurred in Southern Korean in the twentieth century. After, the magnitude of the earthquake was estimated to be ML = 5.0. It was recorded at eleven seismological stations and tremors were felt throughout the Southen Peninsula. However, damages were restricted in relatively narrow area including the SSangysa Temple and nearby town Sukmoon. Fairy detailed report(Hayata, 1940) was published and some reserches based on the report have been performed. The present study briefly introduces damages and researches corresponding the earthquake. Intensity attenuation and peak ground acceleration are also evaluated.

Dynamic measurements are used rather sparingly to determine the elastic moduli of rock cores and modulus values are not much utilized in design practices. The reason seems to result from the general perception that values obtained by dynamic measurement are much higher (about 10 time) than those determined statically. This paper presents results from dynamic and static tests on rock cores. One of the findings is that both moduli determined by statically and dynamically on a solid rock core agrees well at the same-strain. At different strain levels, the ratio between dynamic and static modult widely varies depending upon micro-cracks and discontinuites of rock cores.

During an earthquake, there are three main components of excitation : horizontal excitation of the ground, vertical excitation of the pile due to superstructure feedback produced by vertical excitation of the ground, and the seawater excitation induced by the vertical ground shaking, that is, "the seaquake." These excitations could have effects on the soil plugs in open-ended pipe piles installed at offshore sites. In this study, seaquake excitation induced by the vertical ground shaking was simulated by pulsing the water pressure at the seabed. During a seaquake, due to induced excess porewater pressure and pressure gradients in the soil, the capacity of open-ended pipe piles installed in a simulated sea depth of greater than 220 m was reduced serevely and the soil plugging resistance was degraded by more than 80%. The soil plug was failed because of the upward seepage forces that developed in the soil plug due to excess pore water pressure produced in the bottom of the soil plug during the seaquake. The compressive capacity of an open-ended pile in a simulated sea depth of less than 220m was reduced only by about 10%, and the soil plug resistance was degraded by less than 5%.s than 5%.

This study is intended to investigate the seismic responses of bridge structures considering site effects. The site effects in the seismic analysis of bridge structures were classified into two parts. At first, the seismic responses of the structures on each "soil profile types" of the code were evaluated in accordance with code-specified method and compared with results of time-history analysis method. And next, as a second stage of the study, the responses of the two different soil with considerably different soil properties, even though they are classified to the same "soil profile types" of the code, were evaluated and compared each other. The first part of study is purposed to evaluate the applicability of code-specified method, while the other part is purposed to find the variance of the seismic responses from the different soil sites in the same soil profile types of the code. For the analysis, two major methods of the code, single-mode spectral anaysis and multi-mode spectral analysis, were used and the time-history analysis method which is expected to give more accurate responses was also used for the comparison purposes. For the time-history analysis, time-domain analysis technique of the lumped-mass model with frequency-independent soil springs and dampers was adopted and artificially generated spectra of the code was used as input motion. As the results of the study, the code specified methods for the seismic responses considering the site effects were verified to give the results in conservative side for the most of the cases. However, for the structures on the site with considerable flexibility, the responses of the bridge girders or deckplates by the code methods both in section forces and horizontal movement responses, may have much smaller values than the actual responses. Therefore, more detailed analysis considering the flexibility of the base soil may be required to have more reasonable results in girder responses.in girder responses.

In this study, the boundary element analysis in dynamics for the multilayered semi-infinite plane is developed using the fundamental solution for moving loads. Also the indirect method and superposition method are introduced to consider the multilayered systems and moving loads. At each layer the fundamental solution can be obtained by solving the governing equation which is transformed by the Fourier transform. The governing equation can be solved by three conditions; continuity conditions of displacement and stress, the traction free condition at the surface and the radiation condition at the surface and the radiation condition at the infinite distance. To verify the solution and the developed algorithm, the theoretical solution for the homogeneous layer and commercial FEM program is compared with the results of this study.

A numerical experiment is conduced to study the wave screening effectiveness of wave barriers which are constructed to reduce the ground-transmitted vibration. The finite element method is used for the simulation of the wave propagation behavior. In order to reduce the computational burden the absorbing boundary's one employed. Validity of the numerical model is checked by comparing the results with the published data. The screening effectiveness of the in filled trenches is then studied for different trench dimensions and material properties.

Earthquake damage civil engineering structures every year in the world and bridges are no exception. Bridge structures have proven to be vulnerable to earthquake, sustaining damage to substructure and foundation and being totally destroys as superstructures collapse from their supporting elements. The poor seismic performance of bridge structures is surprising in view of the substantial advance made in design and construction for vertical load. Recently, bridge spans have been pushed further than before, alignment has become increasingly complex and aesthetic requirement have been become more demanding. To reduce the seismic force and to improve the safety of the advanced bridges, the bridge bearings which are the substructures and foundations and their connections to the superstructure become more important and critical elements. Therefore, the functions about seismic devices to be using as bridge bearing are discussed.

The probability of unseating failure of the bridge spans under earthquakes is investigated. Seismic excitations are simulated as nonstationary processes by combining a stationary process and an intensity function. For computational convenience, a simplified single-degree-of-freedom model is adopted, which retains the dynamic characteristics of the original brige motion in concern. The time history analysis for the developed single degree-of-freedom model are carried out to evaluate the response processes, and the probabilistic characteristics of response displacements are evaluated. The reliability analysis of the bridge against the unseating failure is performed with the statistical information of the maximum displacements of responses.

Structural damage is used to be modeled through reductions in the stiffness of structural elements for the purpose of damage estimation of structural system. In this study, the concept of joint damage is employed for more realistic damage assessment of a steel structure. The joint damage is estimated damage based on the mode shape informations using neural networks. The beam-to-column connection in a steel frame structure is represented by a rotational spring at the fixed end of a beam element. The severity of joint damage is defined as the reduction ratio of the connection stiffness with respect to the value of the intact joint. The concept of the substructural identification is used for the localized damage assessment in a large structure. The feasibility of the proposed method is examined using an example with simulated data. It has been found that the joint damages can be reasonably estimated for the case with the measurements of the mode vectors subjected to noise.

The prototype ASME III motor actuated Y-type globe valve has been tested to identify dynamic characteristics. The valve is Seismic Category I equipment and has the function to control water flow in the safety-related system. In this study, two different types of structural identification test i.e. swept sine and broadband random, have been performed at various levels of excitation to verify the effects of test method and excitation level on cross coupling effect as well as natural frequencies and damping values. It was found that swept sine test and broadband random test showed similar natural frequencies, and that the primary interaction was exhibited between horizontal and vertical axes.

The purpose of this paper is to propose the draft guidelines of seismic isolation design of Liquid Metal Reactor (LMR) using high damping laminated rubber bearings. The scopes of guidelines include design requirements of a seismically isolated system and components, seismic isolator, isolation system, interface system between seismic isolation and non-seismic isolation part, qualification and acceptance tests of seismic isolator, seismic isolation reliability, and seismic safety and monitoring system. Proposed guidelines shall be revised to extend to general design guideline for nuclear facilities by further research and discussions.

The influence of the dam-reservoir interaction on the seismic response of dams is studied. To represent the radiation of energy into the infinite region of the reservoir, a transmitting boundary is newly developed. The results obtained using the transmitting boundary is compared with abvailabel analytic solutions.

The influence of the dam-reservoir interaction on the seismic response of dams is studied. The impounded water is assumed to be inviscid and compressible ideal fluid. Material damping is introduce to simulate the energy loss of wave propagation in the water. The irregular region of the impounded water adjacent to the dam is modeled by boundary element method. The regular region extending to infinity is modeled by the transmitting boundary. The dam body is assumed to behave elastically and modeled by finite element method. The coupled equation of motion is obtained by substructure method.

This research investigates the hysteretic behavior of composite beams with web opening near the beam end. The objective of this research is to intend a ductile failure around the web opening subjected to cyclic loading prior to the potential brittle failure at the beam-to-colum connection. Experimental tests of two specimens having different location of opening were conducted resulting in better performance of strength and ductility at the specimen of middle opening compared with that of upper opening. Also, comparisons of experimental and theoretical results were carried out.

In this paper the attention is focused on the modeling of reinforced concrete(R/C) wall structures to check effectiveness and reliability of elasto-plastic analysis. A relatively simple and reliable wall model is investigated, which is suitable to be efficiently incorporated in a practical pushover analysis of R/C wall structural systems. Two types of analogous frames have been examined to the stress analysis of shear walls. One analogous frame is similar to the widely used wide-column model, the second analogous frame also is called truss model which includes vertical edge column and braces. Further studies are needed to apply to nonlinear seismic analysis of building structure with R/C shear walls.

The main objective of this study is to observe the effect of visco-elastic damper on seismic behavior of structure. A small shaking table was designed and manufactured using the materials and machinery available in the market by the authors. Also, two small-scale models with and without visco-elastic dampers were made. Dynamic characteristics, such as natural periods and damping ratios, were measured with free vibration tests. Finally, the earthquake simulations tests by using this shaking table were performed to these models. Based on the test results, the effect of visco-elastic damper on the seismic response of models is evaluated.

Viscoelastic dampers have been successfully applied to building structures for reduction of vibration induced by wind or earthquakes. But accurate estimation of responses of building structures with viscoelastic dampers is very difficult, because the properties of viscoelastic damper is dependent on temperature and frequency of vibration. For efficient control of building vibration, required damping of viscoelastic damping device need be estimated and dynamic analysis method which can estimate the response of building structure with viscoelastic damper system is indispensable. In this paper, an efficient dynamic analysis method of a building structure with viscoelastic dampers is proposed. Efficiency and accuracy of the proposed method are verified comparing analytic results with shaking table test results using reduced building models.

Floors in a structure are often subject to periodic forces which induce excessive oscillations. For control of such oscillations, TMDs(Tuned Mass Dampers) have been widely used and prooved effective. But it is very difficult to estimate the natural frequency of a TMD when it is installed to a structure. Therefore to achieve the TMD properties that are required for satisfactory performances of the structure, it is necessary to tune the TMDs to the optimal state. This paper is intended to suggest the efficient tuning method for simple and economically designed TMDs and to investigate the validity of the method by installing TMDs to a real structure.

Dynamic analyses are performed for the wood structure modeled as a SDOF hysteretic system. The hysteresis model presented is a modified version of Takeda model. The comparison between the results of numerical simulation and the experimental results show good agreements in overall tendencies. The response of wood structure subjected to artificially generated earthquakes considering site effects is studied. It appears that the response is very strongly influenced by the intensity and the frequency contents of the ground motion.

레이다를 이용한 콘크리트 구조믈의 지진으로 인한 손상도를 파악하기 위해, 콘크리트의 전자기적 특성(dielectric properties)을 레이다 작용 주파수 대역인 200MHz에서 6GHz 영역까지 측정하였다. 이의 측정을 위해 실험실에서 콘크리트의 전자기적 특성 계측을 가능하게 하는 회로망분석기(network analyser)를 사용하였다. 콘크리트의 전자기적 특성은 open-ended coaxial probe를 회로망 분석기에 연결하여 측정하였고, 실험전 측정값을 보정(calibration)하는 기법을 찾아내었다. 주파수의 변화와 함께 콘크리트 시편안에 포함된 수분의 양을 조절함으로써, 실제 콘크리트 구조물이 가질 수 있는 상태를 시편을 통해 측정하였다. 측정결과는 콘크리트의 전자기적 특성이 주파수와 수분함량에 따라 변하는 것을 보여주었으며, 이는 레이다를 이용한 콘크리트 구조물의 지진 손상도 파악 방법 개발에 필요한 자료를 제공하였다.