• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.300-305
• /
• 2011

Objectives: The aim of this study was to evaluate the various NiTi rotary instruments regarding their ability to provide a circular apical preparation. Materials and Methods: 50 single canal roots were selected, cut at the cementodentinal junction and the coronal 1/3 of the canals was flared using Gates Glidden burs. Samples were randomly divided into 5 experimental groups of 10 each. In group I, GT files, Profile 04 and Quantec #9 and #10 files were used. In Group II Lightspeed was used instead of Quantec. In Group III, Orifice shaper, Profile .06 series and Lightspeed were used. In Group IV, Quantec #9 and #10 files were used instead of Lightspeed. In Group V, the GT file and the Profile .04 series were used to prepare the entire canal length. All tooth samples were cut at 1 mm, 3 mm and 5 mm from the apex and were examined under the microscope. Results: Groups II and III (Lightspeed) showed a more circular preparation in the apical 1mm samples than the groups that used Quantec (Group I & IV) or GT files and Profile .04 series.(Group V)(p < 0.05) There was no significant difference statistically among the apical 3, 5 mm samples. In 5 mm samples, most of the samples showed complete circularity and none of them showed irregular shape. Conclusions: Lightspeed showed circular preparation at apical 1 mm more frequently than other instruments used in this study. However only 35% of samples showed circularity even in the Lightspeed Group which were enlarged 3 ISO size from the initial apical binding file (IAF) size. So it must be considered that enlarging 3 ISO size isn't enough to make round preparation.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.280-289
• /
• 2011

Objectives: The purpose of this study was to evaluate ${\mu}TBS$ (microtensile bond strength) of current dentin bonding adhesives which have different hydrophobicity with low-shrinkage silorane resin. Materials and Methods: Thirty-six human third molars were used. Middle dentin was exposed. The teeth were randomly assigned to nine experimental groups: Silorane self-etch adhesives (SS), SS + phosphoric acid etching (SS + pa), Adper easy bond (AE), AE + Silorane system bonding (AE + SSb), Clearfil SE bond (CSE), CSE + SSb, All-Bond 2 (AB2), AB2 + SSb, All-Bond 3 (AB3). After adhesive's were applied, the clinical crowns were restored with Filtek LS (3M ESPE). The 0.8 mm ${\times}$ 0.8 mm sticks were submitted to a tensile load using a Micro Tensile Tester (Bisco Inc.). Water sorption was measured to estimate hydrophobicity adhesives. Results: ${\mu}TBS$ of silorane resin to 5 adhesives: SS, 23.2 MPa; CSE, 19.4 MPa; AB3, 30.3 MPa; AB2 and AE, no bond. Additional layering of SSb: CSE + SSb, 26.2 MPa; AB2 + SSb, 33.9 MPa; AE + SSb, no bond. High value of ${\mu}TBS$ was related to cohesive failure. SS showed the lowest water sorption. AE showed the highest solubility. Conclusions: The hydrophobicity of adhesive increased, and silorane resin bond-strength was also increased. Additional hydrophobic adhesive layer did not increase the bond-strength to silorane resin except AB2 + SSb. All-Bond 3 showed similar ${\mu}TBS$ & water sorption with SS. By these facts, we could reach a conclusion that All-Bond 3 is a competitive adhesive which can replace the Silorane adhesive system.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.324-335
• /
• 2011

Objectives: This study investigated the effects of the color components of light-cured composite resin before and after polymerization on degree of conversion (DC) and biaxial flexural strength (FS). Materials and Methods: Four enamel shades (A1, A2, A3, A4) and two dentin shades (A2O, A3O) of Premisa (Kerr Co.) and Denfil (Vericom Co.) were evaluated on their CIE $L^*,\;a^*,\;b^*$ color components using the spectrophotometer before curing, after curing and at 7 day. The DC of same specimens were measured with Near-infrared spectrometer (Nexus, Thermo Nicolet Co.) at 2 hr after cure and at 7 day. Finally, the FS was obtained after all the other measurements were completed at 7 day. The correlations between each color component and DC and FS were evaluated. Results: The light-curing of composite resin resulted in color changes of Premisa in red-blue direction and Denfil in green-blue direction. The DC and FS were affected by product, time and shade (3-way ANOVA, p < 0.05) and product and shade (2-way ANOVA, p < 0.05), respectively. Premisa only showed a significant correlation between the DC and CIE $a^*$ component - before and after polymerization (Pearson product moment correlation, p < 0.05). The FS of Premisa showed significant negative correlations with CIE $a^*$ and CIE $b^*$ components. Conclusions: The DC and FS of the light-curing composite resin were affected by the color components of the material before and after polymerization.

• Restorative Dentistry and Endodontics
• /
• v.36 no.4
• /
• pp.290-299
• /
• 2011

Objectives: The usage of fluoride varnish for a moderate to low caries-risk group has not been well validated. This study aimed to evaluate the preventive and therapeutic efficacies of fluoride varnish on the initiated root caries. Materials and Methods: Ten premolars were sectioned into quarters, further divided into two windows, one of which was painted with Fluor Protector (1,000 ppm fluoride, Ivoclar Vivadent). An initial lesion with a well-preserved surface layer was produced by pH cycling. Scanned line analysis using energy dispersive spectrometry determined the weight percentages of Ca and P in the demineralized layer. Scanning Electron microscopy and confocal laser scanning microscopy (CLSM) evaluated the varnish-applied root surfaces. Results: The mean lesion depth (SD) was 12.3 (2.6) ${\mu}m$ (single cycling) and 19.6 (3.8) ${\mu}m$ (double cycling). Double cycling extended the lesion depth, but induced no more mineral loss than single cycling (p < 0.05). The mean weight percentages of Ca and P between groups with and without varnish were not significantly different (p < 0.05). A CLSM showed varnish remained within 15 ${\mu}m$ of the surface layer. Conclusions: When a mild acid challenge initiated root tissue demineralization, the application of low-concentration fluoride varnish did not influence the lesion depth or the mineral composition of the subsurface lesion.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.208-221
• /
• 2007

The fracture toughness test is believed as a clinically relevant method for assessing the fracture resistance of the dentinal restoratives. The objectives of this study were to measure the fracture toughness $(K_{1C})$ and microtensile bond strength of dentin-resin composite interface and compare their relationship for their use in evaluation of the integrity of the dentin-resin bond. A minimum of six short-rod specimens for fracture toughness test and fifteen specimens for microtensile bond strength test was fabricated for each group of materials used. After all specimens storing for 24 hours in distilled water at $37^{\circ}C$, they were tensile-loaded with an EZ tester universal testing machin. Statistical analysis was performed using ANOVA and Tukey's test at the 95% confidence level, Pearson's coefficient was used to verify the correlation between the mean of fracture toughness and microtensile bond strength. FE-SEM was employed on fractured surface to describe the crack propagation. Fracture toughness value of Clearfil SE Bond (SE) was the highest, followed by Adper Single Bond 2 (SB), OptiBond Solo (OB), ONE-STEP PLUS (0S), ScotchBond Multi-purpose (SM) and there was significant difference between SE and other 4 groups (p < 0.05). There were, however, no significant difference among SB, OB, OS, SM (p > 0.05). Microtensile bond strength of SE was the highest, followed by SB, OB, SM, OS and OS only showed significant lower value (p < 0.05). There was no correlation between fracture toughness and microtensile bond strength values. FE-SEM examination revealed that dentin bonding agent showed different film thickness and different failure pattern according to the film thickness. From the limited results of this study, it was noted that there was statistically no correlation between K1C and ${\mu}TBS$. We can conclude that for obtaining the reliability of bond strength test of dentin bonding agent, we must pay more attention to the test procedure and its profound scrutiny.

• Restorative Dentistry and Endodontics
• /
• v.32 no.3
• /
• pp.222-235
• /
• 2007

The objectives of this study was to evaluate the effect of thermocycling on the ${\mu}TBS$ (microtensile bond strength) to dentin with four different adhesive systems to examine the bonding durability. Freshly extracted $3^{rd}$ molar teeth were exposed occlusal dentin surfaces, and randomly distributed into 8 adhesive groups 3-steps total-etching (Scotchbond Multi-Purpose Plus; SM, All Bond-2; AB), 2-steps total-etching (Single Bond; SB, One Step plus; OS), 2-steps self-etching (Clearfil SE Bond; SE, AdheSE AD) and single-step self-etching systems (Promp L-Pop; PL, Xeno III; XE) Each adhesive system in 8 adhesives groups was applied on prepared dentin surface as an instruction and resin composite (Z250) was placed incrementally and light-cured. The bonded specimens were sectioned with low-speed diamond saw to obtain $1\times1mm$ sticks after 24 hours of storage at $37^{\circ}C$ distilled water and proceeded thermocycling at the pre-determined cycles of 0, 1,000 and 2,000. The ${\mu}TBS$ test was carried out with EZ-tester at 1mm/min. The results of bond strength test were statistically analyzed using one-way ANOVA/ Duncan's test at the a < 0.05 confidence level. Also, the fracture mode of debonded surface and the interface were examined under SEM. The results of this study were as follows ; 1. 3-step total etching adhesives showed stable, but bond strength of 2-step adhesives were decreased as thermocycling stress. 2. SE showed the highest bond strength, but single step adhesives (PL, XE) had the lowest value both before and after thermocycling. 3 Most of adhesives showed adhesive failure. The total-etching systems were prone to adhesive failure and the single-step systems were mixed failure after thermocycling. Within limited results of this study, the bond strength of adhesive system was material specific and the bonding durability was affected by the bonding step/ procedure of adhesive Simplified bonding procedures do not necessarily imply improved bonding performance.

• Restorative Dentistry and Endodontics
• /
• v.33 no.4
• /
• pp.341-351
• /
• 2008

This study investigated the effect of intermittent polymerization on the rate of polymerization shrinkage and cuspal deflection in composite resins. The linear polymerization shrinkage of each composite was measured using the custom-made linometer along with the light shutter specially devised to block the light at the previously determined interval. Samples were divided into 4 groups by light curing method; Group 1) continuous light (60s with light on); Group 2) intermittent light (cycles of 3s with 2s light on & 1s with light off for 90s): Group 3) intermittent light (cycles of 2s with 1s light on & 1s with light off for 120s); Group 4) intermittent light (cycles of 3s with 1s light on & 2s with light off for 180s). The amount of linear polymerization shrinkage was measured and its maximum rate (Rmax) and peak time (PT) in the first 15 seconds were calculated. For the measurement of cuspal deflection of teeth, MOD cavities were prepared in 10 extracted maxillary premolars. Reduction in the intercuspal distance was measured by the custom-made cuspal deflection measuring machine. ANOVA analysis was used for the comparison of the light curing groups and t-test was used to determine significant difference between the composite resins. Pyramid showed the greater amount of polymerization shrinkage than Heliomolar (p < 0.05). There was no significant difference in the linear polymerization shrinkage among the groups. The Rmax was group 4 < 3, 2 < 1 in Heliomolar and group 3 < 4 < 2, 1 in Pyramid (p < 0.05). Pyramid demonstrated greater cuspal deflection than Heliomolar. The cuspal deflection in Heliomolar was group 4 < 3 < 2, 1 and group 4, 3 < 2, 1 in Pyramid (p < 0.05). It was concluded that the reduced rate of polymerization shrinkage by intermittent polymerization can help to decrease the cuspal deflection.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.28 no.3
• /
• pp.1-13
• /
• 2010

This research is the semantic study on the nature cognition and lyricism of pavilion builders as reflected in the pavilion tablets in the Damyang poetry culture area built during 16th century. The names of pavilions, pavilion writings and "poetry with given theme" were studied by actual site visits. The view on the nature and aesthetic awareness of the pavilion builders at the time were explored together with surrounding landscapes. Following conclusions were drawn. 1. Pavilion names borrowed phrases from the famous historical events left by the sages. Or, they took the compliment on the beautiful nature surrounding orthe academic achievement of pavilion owners as the theme, then elaborated them with thinking based on Sung Confucianism. 2. The writings of pavilion literature were the idealistic view on the nature. They think the nature and human as "object and ego are one, object and ego communicate each other, object and ego become one". 3. The nature in the 16th century was the "principle of birth-death-grow-wither" for the intellectuals. They thought that the nature is the ultimate place to return for the realization of life with self-respect. 4. The introduction of fairy land among literary activities in the pavilion was the symbolic means healing the frustrated ego. It was confirmed that they temporarily entrusted their depressed feelings by borrowing the fairy land, far from the reality. The pavilion was the space to escape from the reality and soothe the anger and discord in the reality. 5. The pavilion literature in the Damyang poetry culture area during 16th century sang their pleasure of enjoying the beautiful scenery in the rural area using their social status. The literary works also contained their agony due to the frustration of difficulty in the realization of ideal. When the intellectuals, who already mastered literature, history and philosophy, came down to rural area, built pavilions at the location with beautiful scenery, and spent time while composing poetry, it was an escape from the burden that they should take the social responsibility as the model intellectuals of the society. The pavilions in Damyang poetry-culture area during 16th century were the idealized conceptual world and the space of awareness reflecting the philosophy and thinking of the time.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.1
• /
• pp.34-44
• /
• 2018

In the Ancient Mesopotamia, Egypt, Judas, Greece, and Rome, Phoenix dactylifera was planted in gardens or orchards to signify life, blessing, and victory. Branches of Phoenix dactylifera, likened to high and precious, were referred to one of the gifts to the king in the second century BC and have been used in the Feast of Tabernacles. And they were engraved on the walls of the temple and along with cherub. Besides, Phoenix dactylifera is compared with a righteous person in the Bible since it grows straight despite strong winds. And, it was used as a symbol of honesty, justice, and right. Churches call the week before Easter Palm Sunday since the crowd laid the leaves of date palm trees on the road and shouted "Hosanna" while waving the date palm branches when Jesus entered Jerusalem. Moreover, pilgrim in the Middle Ages was called 'Palmer' in English due to custom of returning with the leaves and branches of date palm trees as a memorial of the Holy Land pilgrimage. This study analyzes naming issue of Phoenix dactylifera through the old literature and 27 versions of the most influential Bibles in History of Bible Translation in Korea, China, and Japan. Phoenix dactylifera is translated into Chinese as '棕櫚(Trachycarpus fortunei)', a native tree of China. 棕櫚 is similar to Phoenix dactylifera, but its fruit and leaf are quite distinct. This being so, translating Phoenix dactylifera as 棕櫚 has a limit to convey symbolic meaning adequately. In the Japanese Bible, on the other hand, Phoenix dactylifera is translated as 'なつめやし(Natsumeyashi)' meant date palm tree. Most of Protestant Bible in Korea use 'Jongryeo' like Chinese Bible while translation in Korean Catholic Bible(2005) varies from one scripture to another: 'Yaja Namu (Palm Tree)' - 38 times, 'Jongryeo Namu' - 5 times, and 'Daechu Yaja Namu (Date Palm Tree)' - 3 times. Date Palm Tree, 'Jongryeo Tree', and Palm Tree don't grow in Korea. However, they had long been recognized as Haejo(海棗), Jongryeo(?櫚), and Yaja(椰子) respectively through China and Japan. Each of them called by a distinct name correspond with its own characteristic and used separately in Korean Classics as Jongryeo and Haejo were identified in ancient Chinese literatures. It seems that more confusion was raised since 'Palm' was translated as 'Jongryeo' in several books including "?藤和英大辭典 (1915)", "Modern 朝鮮外來語辭典(1938)", and "Latin-Korean Dictionary(1995)". However, the Latin term 'Palmae' is translated into English as either palm tree or date palm. The results of this study suggest that more accurate translation of Phoenix dactylifera in the Bible would be 'Daechu Yaja Namu (Date Palm Tree)' and using different name fit for its own characteristic would be more appropriate.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.1
• /
• pp.25-35
• /
• 2017

The purpose of this study is to re-exam of the modern values of a moat to utilize it with various functions such as a military defense on the outskirts of the castle, dividing the space by its boundary, controlling the micro-climate in the worsening modern environment with temperature rise due to climate change and habitat reduction of animals, and providing the habitat of animals to modern urban space, etc. The scope of the study is focusing on the castles with the moat installed to prevent the enemy from accessing directly to the wall using a pond or water path for military defense on the outskirts of the castle or to divide it into boundaries. In the Orient, the Nakan Eupseong, Haemi Eupseong, Gyeongju Wolseong in Korea and the Forbidden City in China, and Nijo Castle and Osaka Castle in Japan were selected. In the West, Edinburgh Castle in Britain, Blois Castle in France, Chillon Castle in Switzerland, and Frederiksborg Castle in Denmark were selected for the study. As a research method, literature research and field research were conducted. For the Orient, it was conducted in parallel with the literature research and field research. For the western, it was mainly conducted with literature research. For the literature research, the origin of the moat, the concept of the moat, the function of the moat, the history and culture of the western moat are based on the data from the related institutions and previous studies. For the Orient field research, exploring was conducted in two to three times from Jan. 2016 to Dec. 2016 in each of the target areas of Nakan Eupseong, Haemi Eupseong, Gyeongju Wolseong in Korea and the Forbidden City in China, and Nijo Castle and Osaka Castle in Japan. The contents of the research were analyzed through interviews, photographs, measurements, and observations on the function, size, and characteristics of the moat of each target. The results of this study are as follows. The moat was a structure installed to set a boundary for military defense facilities on the outskirts of a castle and it played an important role as a part of the city in the ancient times of Asia and the West through the Middle Ages. The role of the moat is gradually disappearing due to the disappearance of the purpose of military defense. However, moats are excluded from modern landscape planning, despite the fact that a moat filled with water is a hydrophilic space with great historical and cultural value such as various cultural activities and providing habitats for animals. By reflecting on the moats various functions in modern cities and utilizing it, it is expected to be utilized to bring pleasant air into the city where the circulation of air is blocked and energize the city as a hydroponic element.