• Geophysics and Geophysical Exploration
• /
• v.9 no.1
• /
• pp.50-59
• /
• 2006

The risk of fault reactivation in the Gippsland Basin was calculated using the FAST (Fault Analysis Seal Technology) technique, which determines fault reactivation risk by estimating the increase in pore pressure required to cause reactivation within the present-day stress field. The stress regime in the Gippsland Basin is on the boundary between strike-slip and reverse faulting: maximum horizontal stress $({\sim}\;40.5\;Mpa/km)$ > vertical stress (21 Mpa/km) ${\sim}$ minimum horizontal stress (20 MPa/km). Pore pressure is hydrostatic above the Campanian Volcanics of the Golden Beach Subgroup. The NW-SE maximum horizontal stress orientation $(139^{\circ}N)$ determined herein is broadly consistent with previous estimates, and verifies a NW-SE maximum horizontal stress orientation in the Gippsland Basin. Fault reactivation risk in the Gippsland Basin was calculated using two fault strength scenarios; cohesionless faults $(C=0;{\mu}=0.65)$ and healed faults $(C=5.4;\;{\mu}=0.78)$. The orientations of faults with relatively high and relatively low reactivation potential are almost identical for healed and cohesionless fault strength scenarios. High-angle faults striking NE-SW are unlikely to reactivate in the current stress regime. High-angle faults oriented SSE-NNW and ENE-WSW have the highest fault reactivation risk. Additionally, low-angle faults (thrust faults) striking NE-SW have a relatively high risk of reactivation. The highest reactivation risk for optimally oriented faults corresponds to an estimated pore pressure increase (Delta-P) of 3.8 MPa $({\sim}548\;psi)$ for cohesionless faults and 15.6 MPa $({\sim}2262\;psi)$ for healed faults. The absolute values of pore pressure increase obtained from fault reactivation analysis presented in this paper are subject to large errors because of uncertainties in the geomechanical model (in situ stress and rock strength data). In particular, the maximum horizontal stress magnitude and fault strength data are poorly constrained. Therefore, fault reactivation analysis cannot be used to directly measure the maximum allowable pore pressure increase within a reservoir. We argue that fault reactivation analysis of this type can only be used for assessing the relative risk of fault reactivation and not to determine the maximum allowable pore pressure increase a fault can withstand prior to reactivation.

• Journal of Korean Society of Forest Science
• /
• v.86 no.4
• /
• pp.415-421
• /
• 1997

The objectives of this study were to obtain standardized basic data on cambial electrical resistance (CER) of ornamental trees to be used for estimation of tree vigor and to compare CER between shrubs, deciduous, and coniferous trees in relation to bud opening, flowering, and growth cessation. Eighty healthy trees with four trees each for twenty ornamental tree species growing at an university campus in Suwon were selected and their CER was measured using a Shigometer every week from March to May, once a month from June to October and every two weeks in November, 1996. The CER of all tree species was high in March, started to decrease in April, maintained minimum in May through August, began to increase in September, and returned in November to the similar high level to March. Among the 20 species, Metasequoia glyptostroboides showed the lowest($5.5k{\Omega}$) annual average CER, while Cercis chinensis and Ligustrum obtusifolium had the highest($22.7k{\Omega}$, $22.9k{\Omega}$) annual average CER. The lowest CER($2.4k{\Omega}$) in summer(June through August) was obtained from Wisteria floribunda, second lowest($2.5k{\Omega}$) from Metasequoia glyptostroboides, the highest CER($46.8k{\Omega}$) during dormant season from Euonymus japonica, and second highest($45.0k{\Omega}$) obtained from Ligustrum obtusifolium. The CER of most species, particularly shrub species, started to decrease with bud opening, and many species, particularly shrubs and deciduous trees with large amount of flowers, showed sharp decrease with flowering. When CER was compared between shrubs and trees, shrubs showed higher average CER than trees, and seasonal difference in CER of evergreen species was smaller than that of deciduous species. It is interesting to note that the deciduous Metasequoia glyptostroboides had the lowest annual average CER.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.43 no.4
• /
• pp.87-97
• /
• 2015

There's a trend towards vitalization of nightscape planning businesses nationally and locally as well for city image making and activation of regional economy, but there is still no systematic nightscape planning going on for lack of relevant researches and objective evaluations. This study aims to suggest the guideline for nightscape planning by conducting an eye tracking experiment and survey for recognizing the characteristics of a nightscape. Furthermore, the authors intended to verify the eye-tracking method as a tool for landscape evaluation. The research site was restricted in the campus of Virginia Tech, VA, and those were selected by experts' survey among various types of nightscape images. The variables for analyzing the characteristics of nightscape images selected were 'preference', 'safety(fear)' and 'clearness'. 'Fixation duration', 'saccade duration', 'scan path length', and 'pupil size' were selected as the eye movement measurements. The results of this study are as follows: The first outcome found was that there were significant differences among the characteristics(preference, safety and clearness) of a nightscape by MANOVA, and these variables were correlated positively by Pearson's correlation. Secondly, there were differences on fixation duration, saccade duration and scan path depending on the nightscape setting statistically. Also, the eye tracking measurement in an open setting was recorded lower than enclosed settings. In the result of a heat map, we found the meaning of the fixated areas on both viewing without intention and viewing intentionally. It turned out that the fixated areas were consistent with the areas the subjects felt preferred and clarity in all of the nightscape images, which means people usually focus on what they prefer and see clearly in a certain nightscape. Based on this result and previous studies, the authors could make a conclusion that eye tracking method can apply to evaluate nightscape settings in terms of analyzing the whole characteristics and finding specific points for the detailed analysis as well. Therefore, these results can contribute by suggesting nightscape planning, implication of the landscape evaluation, and implication of the eye tracking study.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.5
• /
• pp.143-158
• /
• 2021

The purpose of this study is to suggest a direction for enhancing the mutual trust level between employees and managers by examining the effect of job satisfaction of electric power companies's employees and performance-oriented remuneration paid to them on awareness level of organizational justice and a trust in manager. Based on a significant positive relationship between employee's job satisfaction and trust in a manager, a significant positive relationship between employee's job satisfaction and perception of organizational justice, and a positive relationship between organizational justice and trust in manager, it was possible to confirm the mediating role of organizational justice between job satisfaction and a trust in manager. In addition, although performance-oriented remuneration did not have a significant effect on trust in manager directly, it was found to have a significant negative effect on distributive justice and procedural justice, but for interactional justice did not appear to have a significant influence. Because the autonomy of the labor budget is quite limited due to the government's total regulation on the size of the labor budget for public enterprises and due to the government's evaluation of management of public enterprises, it can be explained as having a negative effect on the perception of organizational justice. In addition, since the partial mediating effect of distributive justice and interactional justice was confirmed in the relationship between job satisfaction and trust in manager, the mediating effect of procedural justice was insignificant, it was confirmed that the need to establish and operate an internal HR management system based on smooth communication that employees can satisfy and accept can have a significant impact on trust in manager. On the other hand, because the negative complete mediating effect of distributive justice and procedural justice between performance-oriented remuneration and trust in manager was significantly confirmed, It is showing that employees' negative perceptions of performance distribution procedures and distribution results had a negative effect on trust in manager. The results of this study suggest that employees will perceive the organization as fair, and trust the manager who is the decision maker, when they are fully rewarded for their performance, with job satisfaction, a fair evaluation of their efforts, even if there are various factors that can influence managers to be trusted by their employees.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.39 no.1
• /
• pp.45-52
• /
• 2019

This experiment was carried out to study the change of productivity and feed value in different types of hilly pasture. The pasture utilized in the experiment was placed on the experimental farm of Pyeongchang Campus of Seoul National University. Forage production type(FP; Orchardgrass 18 + Tall Fescue 12 + Timothy 5 + White clover 5 kg/ha) and Public farm type(PF: Orchardgrass 12 + Tall Fescue 18 + Timothy 5 + White clover 5 kg/ha) pasture were established in September 3, 2014 and utilized (cutting or grazing) four times every year. Growth characteristics, yield and forage quality were investigated for two years. Plant height of grasses was the highest in the $1^{st}$ cutting and legumes was in the $2^{nd}$ cutting. Dry matter (DM) content was highest at every the $1^{st}$ cut grasses significantly lower at the $2^{nd}$ harvest (p<0.05). However, there was no significant difference in the $2^{nd}$, $3^{rd}$ and $4^{th}$ harvest in 2016. In the botanical composition change, the portion of legume was gradually increased after pasture establishment and the ratio of weed and bare land was higher at $2^{nd}$ and $3^{rd}$ cutting, but it was decreased at $4^{th}$ harvest. There was no significant difference in 2016 of fresh yield between two farm types (p>0.05). The yield of dry matter showed similar trend of fresh yield and forage production type was higher than that of public farm type (p<0.05). The forage intake by livestock was 1,452 kg/ha in 2015 and 1,743 kg/ha in 2016. Pasture utilization ratio of public farm type pasture was highest in the $3^{rd}$ grazing time. Forage quality of pasture in relation to management type had not significant difference, but there was difference in harvest times. Crude protein (CP) was the lowest in the $1^{st}$ harvest and total digestible nutrient (TDN) was highest in the $1^{st}$ harvest and lowest in the $4^{th}$ harvest. Based on the above results, it is found that the establishment of pasture suitable for farm's situation is important for set up of Korean model of hilly pasture. Although the forage production type is superior on forage productivity, it is recommended that the results will be provided as basic data for management of public farm type in the future.

• Korean Journal of Environmental Biology
• /
• v.36 no.3
• /
• pp.359-369
• /
• 2018

Harmful algal blooms (HABs) are a serious problem for public health and fisheries industries, thus there exists a need to investigate the possible ways for effective control of HABs. In the present study, we investigated the algicidal effects of a newly developed GreenTD against the HABs (Chattonella marina, Heterosigma akashiwo, Cochlodinium polykriokides, and Heterocapsa circularisquama) and non-HABs (Chaetoceros simplex, Skeletonema sp. and Tetraselmis sp.), which is focused on the different population density and concentration gradients of algicidal substances. The time series viability of target alga was assessed based on the activity of Chl. a photosynthetic efficiency in terms of $F_v/F_m$, and in vivo fluorescence (FSU). Effective control of Raphidophyta, C. marina and H. akashiwo was achieved at a GreenTD concentration of $0.5{\mu}gL^{-1}$ and $0.2{\mu}gL^{-1}$, respectively, and regrowth of both the species was not observed even after 14 days. The inhibitory ratio of the dinoflagellate, C. polykriokides was more than 80% at $0.2{\mu}gL^{-1}$ of GreenTD. H. circularisquama was constantly affected in the presence of $0.2{\mu}gL^{-1}$ of GreenTD in the high- and low-population density experimental groups. On the other hand, diatoms, C. simplex, and Skeletonema sp. were not significantly affected even in the presence of $0.2{\mu}gL^{-1}$ of GreenTD and exhibited re-growth activity with the passage of incubation time. In particular, green alga Tetraselmis sp. remained unaffected even in the presence of the highest concentration of GreenTD ($1.0{\mu}gL^{-1}$), implying that non-HABs were not greatly influenced by the algicidal substances. As a result, the algicidal activity of GreenTD on the harmful and nonharmful algae was as follows: raphidophyte>dinoflagellates>diatoms>green alga. Consequently, our results indicate that inoculation of GreenTD substances into natural blooms at a threshold concentration ($0.2{\mu}gL^{-1}$) can maximize the algicidal activity against HABs species. If we consider the dilution and diffusion rate in the field application, it is hypothesized that GreenTD will demonstrate economic efficiency, thus leading to effective control against the target HABs in the closed bay.

• Journal of Practical Engineering Education
• /
• v.15 no.1
• /
• pp.119-126
• /
• 2023

Today, in order to improve fuel efficiency and dynamic behavior of automobiles, an era of light weight and simplification of automobile parts is being formed. In order to simplify and design and manufacture the shape of the product, various components are integrated. For example, in order to commercialize three products into one product, product processing is occurring to a very narrow area. In the case of existing parts, precision die casting or casting production is used for processing convenience, and the multi-piece method requires a lot of processes and reduces the precision and strength of the parts. It is very advantageous to manufacture integrally to simplify the processing air and secure the strength of the parts, but if a deep and narrow pocket part needs to be processed, it cannot be processed with the equipment's own spindle. To solve a problem, research on cutting processing is being actively conducted, and multi-axis composite processing technology not only solves this problem. It has many advantages, such as being able to cut into composite shapes that have been difficult to flexibly cut through various processes with one machine tool so far. However, the reality is that expensive equipment increases manufacturing costs and lacks engineers who can operate the machine. In the five-axis cutting processing machine, when producing products with deep and narrow sections, the cycle time increases in product production due to the indirectness of tools, and many problems occur in processing. Therefore, dedicated machine tools and multi-axis composite machines should be used. Alternatively, an angle spindle may be used as a special tool capable of multi-axis composite machining of five or more axes in a three-axis machining center. Various and continuous studies are needed in areas such as processing vibration absorption, low heat generation and operational stability, excellent dimensional stability, and strength securing by using the angle spindle.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.19 no.2
• /
• pp.197-214
• /
• 2024

This study aimed to investigate students' perceptions at science and technology specialized universities towards entrepreneurship support policies and to derive policy improvement measures by applying a bottom-up approach to reflect the requirements of the policy beneficiaries, i.e., the students. Specifically, the research explored effective execution strategies for student entrepreneurship support policies through a survey and analysis of KAIST students. The findings revealed that KAIST students recognize the urgent need for improvement in sharing policy objectives with the student entrepreneurship field, reflecting the opinions of the campus entrepreneurship scene in policy formulation, and constructing an entrepreneurship-friendly academic system for nurturing student entrepreneurs. Additionally, there was a highlighted need for enhancement in the capacity of implementing agencies, as well as in marketing and market development capabilities, and organizational management and practical skills as entrepreneurs within the educational curriculum. Consequently, this study proposes the following improvement measures: First, it calls for enhanced transparency and accessibility of entrepreneurship support policies, ensuring students clearly understand policy objectives and can easily access information. Second, it advocates for student-centered policy development, where students' opinions are actively incorporated to devise customized policies that consider their needs and the actual entrepreneurship environment. Third, there is a demand for improving entrepreneurship-friendly academic systems, encouraging more active participation in entrepreneurship activities by adopting or refining academic policies that recognize entrepreneurship activities as credits or expand entrepreneurship-related courses. Based on these results, it is expected that this research will provide valuable foundational data to actively support student entrepreneurship in science and technology specialized universities, foster an entrepreneurial spirit, and contribute to the creation of an innovation-driven entrepreneurship ecosystem that contributes to technological innovation and social value creation.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.36 no.3
• /
• pp.26-36
• /
• 2018

This study aims to examine the characteristics of landscape through the analysis of location and the landscape of Gugok while also conducting the empirical study through the literature review, field study, and digital analysis of the Okgung Gugok. Oksan Gugok is a set of songs set in Ogsan Creek(玉山川)or Jagyese Creek(紫溪川, 紫玉山), which flows in front of the Oksan Memorial Hall(李彦迪), which is dedicated to the Lee Eong-jeok (李彦迪). We first ascertained the location and configuration of Oksan Gogok. Second, we confirmed the accurate location of Oksan Gogok by utilizing the digital topographic map of Oksan Gogok which was submitted by Google Earth Pro and Geographic Information Center as well as the length of the longitude of the gravel measured by the Trimble Juno SB GPS. Through the study of the literature and the field investigation, The results of the study are as follows. First, Yi Eonjeok was not a direct composer of Oksan Gugok, nor did he produce "Oksan Gugokha(Music)". Lee Ia-sung(李野淳), the ninth Youngest Son of Tweo-Kye, Hwang Lee, visited the "Oksan Gugokha" in the spring of 1823(Sunjo 23), which was the 270th years after the reign of Yi Eonjeok. At this time, receiving the proposal of Ian Sung, Lee Jung-eom(李鼎儼), Lee Jung-gi(李鼎基), and Lee Jung-byeong(李鼎秉), the descendants of Ian Sung set up a song and created Oksan Gugok Music. And the Essay of Oksan Travel Companions writted by Lee Jung-gi turns out being a crucial data to describe the situation when setting up the Ok-San Gugok. Second, In the majority of cases, Gogok Forest is a forest managed by a Confucian Scholar, not run by ordinary people. The creation of "Oksan Bugok Music" can be regarded as an expression of pride that the descendants of Yi Eonjeok and Lee Hwang, and next generation of several Confucian scholars had inherited traditional Neo-Confucian. Third, Lee Jung-eom's "Oksan Donghaengki" contains a detailed description of the "Oksan Gugokha" process and the process of creating a song. Fourth, We examined the location of one to nine Oksan songs again. In particular, eight songs and nine songs were located at irregular intervals, and eight songs were identified as $36^{\circ}01^{\prime}08.60^{{\prime}{\prime}}N$, $129^{\circ}09^{\prime}31.20^{{\prime}{\prime}}E$. Referring to the ancient kingdom of Taojam, the nine-stringed Sainam was unbiased as a lower rock where the two valleys of the East West congregate. The location was estimated at $36^{\circ}01^{\prime}19.79^{{\prime}{\prime}}N$, $129^{\circ}09^{\prime}30.26^{{\prime}{\prime}}E$. Fifth, The landscape elements and landscapes presented in Lee Jung-eom's "Oksan Gugokha" were divided into form, semantic and climatic elements. As a result, Lee Jung-eom's Cho Young-gwan was able to see the ideal of mountain water and the feeling of being idle in nature as well as the sense of freedom. Sixth, After examining the appearance of the elements and the frequency of the appearance of the landscape, 'water' and 'mountain' were the absolute factors that emphasized the original curved environment at the mouth of Lee Jung-eom. Therefore, there was gugokga can gauge the fresh ideas(神仙思想)and retreat ever(隱居思想). This inherent harmony between the landscape as well as through the mulah any ideas that one with nature and meditation, Confucian tube.