• 대한원격탐사학회지
• /
• 제22권4호
• /
• pp.295-304
• /
• 2006

영상융합은 "특정 알고리즘의 사용을 통해 두 개 혹은 그 이상의 서로 다른 영상을 조합하여 새로운 영상을 만들어내는 것"을 뜻하며 원격탐사에서는 주로 낮은 공간해상도의 멀티스펙트럴 영상과 높은 공간해상도의 흑백영상을 융합하여 높은 공간해상도의 멀티스펙트럴 영상을 생성하는 것을 의미한다. 일반적으로 하이퍼스펙트럴 영상융합을 위해서는 기존의 멀티스펙트럴 영상융합 기법을 이용한 방법이나 분광혼합기법을 이용한 방법을 사용한다. 전자의 경우에는 분광정보가 손실될 가능성이 높으며, 후자의 경우는, endmember의 정보나 부가적인 데이터가 필요하고 결과 영상의 경우 공간적 정보가 상대적으로 부정확한 문제점을 보인다. 따라서 본 연구에서는 하이퍼스펙트럴 영상의 분광특성을 보존하기 위한 융합방법으로서 2단계 분광혼합기법을 사용한 영상융합 알고리즘을 제안하였으며 이를 실제 Hyperion, ALI 영상에 적용하여 평가하였다. 이를 통해 제안한 알고리즘에 의해서 융합된 결과가 PCA, GS 융합기법에 비해서 높은 공간, 분광 해상도를 유지할 수 있음을 보여주었다.

• 한국간호교육학회지
• /
• 제21권4호
• /
• pp.528-539
• /
• 2015

Purpose: The purpose of this study was to develop an integrated nursing practicum education matrix based on the learning outcomes of each stage. Methods: In this Delphi technique study, 10 experts, consisting of six professors and four nurses, participated in the development of the matrix. The first step was an in-depth review for the composition of the questionnaire and the second step was the Delphi technique. The Delphi survey was conducted two times in order to complete the components of the matrix. The survey data was analyzed for statistical averages and standard deviations to decide the order of priority. Results: According to each stage (i.e. fundamental stage, competent stage, and proficient stage), the matrix was composed of education contents, methods, evaluation methods, and curriculum outcomes. Conclusion: The integrated nursing practicum education matrix of Y University was completed. The developed matrix will result in a reduction in the gap between nursing education and clinical practice and an improvement in nursing competency.

• Journal of Periodontal and Implant Science
• /
• 제36권4호
• /
• pp.879-889
• /
• 2006

The early exposure of cover screws is a common complication of 2-stage implant technique. The exposure of cover screws between stage I and IT surgery may cause inflammation in the soft tissues surrounding the implants, and lead to peri-implantitis or marginal bone loss. The purpose of this study was to evaluate the effect of the early exposure of cover screws on implants placed using 2-stage technique. Two hundred and nineteen implants in 77 patients were examined for cumulative survival rate, radiographic marginal bone level change, cause and frequency of the early exposure. The results were as follows: 1. Twenty-five implants showed early exposure of cover screws with a frequency of 11.4%. 2. Cumulative survival rate of the implants with early cover screw exposure was 88.0%, and that of the implants without cover screw exposure was 96,9%. 3. At the time of stage IT surgery and 1 year after loading, the marginal bone loss was greater around the implants with early exposure of cover screws than around the implants without cover screw exposure(p <0.05), 4, There was no statistically significant difference in the frequency of the early exposure according to the implant diameter, gender, and smoking(p >0,05).

• 대한통합의학회지
• /
• 제10권1호
• /
• pp.27-38
• /
• 2022

Purpose : This study is aimed to develop and validate the clinical practice education program and clinical competence scale of occupational therapy student. Methods : The development of the clinical practice education program used the delphi technique method, which had a total of five steps. Based on the occupational therapist's job analysis, the first stage assessed the importance of 21 experts, and the second stage examined the importance of 19 new specialists to derive constitutive factors. In the third stage, in-depth interviews were conducted with three experts based on the derived factors, and in the fourth stage, the final clinical practice education program was derived. In the final stage, the details of the clinical training program were drawn up based on the themes and were reviewed by two experts. Structured and unstructured interviews were conducted with 43 job experts. Results : The expert survey through the delphi technique was conducted three times, and content analysis and descriptive statistics were conducted to examine the distribution of responses. The final 11 educational program topics and contents were derived. Topics are confirmation of client information, evaluation and intervention, cognitive therapy, spinal cord injury, brain injury, musculoskeletal disorders, pediatric occupational therapy, interventions in activities of daily living, driving rehabilitation, vocational rehabilitation, occupational therapy assessment tool, safety training and management. Conclusion : The clinical practice education program reduce the difference between school education and clinical education of occupational therapy student. Occupational therapy helps college student understand occupational therapy practices and improve the quality of clinical education. Through more research and supplementation of clinical practice education programs in the future, it is suggested that clinical practice education be successfully operated in various practice institutions and used as basic data for designing and evaluating useful educational models.

• 한국정보통신학회논문지
• /
• 제10권8호
• /
• pp.1465-1470
• /
• 2006

본 논문에서는 단거리 무선 통신의 새로운 국제 표준으로 부상하고 있는 2.4 GHz ZigBee 응용을 위한 저전력 CMOS LNA(Low Noise Amplifier)를 설계하였다. 제안한 구조는 전류 재사용 기법을 이용한 2단 cascade구조이며 회로의 설계에서 TSMC $0.18{\mu}m$ CMOS 공정을 사용하였다. 전류 재사용단은 두 단의 증폭기 전류를 공유함으로써 LNA의 전력 소모를 적게 하는 효과를 얻을 수 있다. 본 논문에서는 LNA설계 과정을 소개하고 ADS(Advanced Design System)를 이용한 모의실험 결과를 제시하여 검증하였다. 모의실험 결과, 1.0V의 전압이 인가될 때 1.38mW의 매우 낮은 전력 소모를 확인하였으며 이는 지금까지 발표된 LNA 중 가장 낮은 값이다. 또한 13.83dB의 최대 이득, -20.37dB의 입력 반사 손실, -22.48dB의 출력 반사 손실 그리 고 1.13dB의 최소 잡음 지수를 보였다.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1518-1526
• /
• 2001

In this paper, the mechanism of unsteady potential interaction and wake interaction in one stage axial turbine is numerically investigated at design point in two-dimensional viewpoint. The numerical technique used is the upwind scheme of Van-Leer's Flux Vector Splitting (FVS) and Cubic spline interpolation is applied on zonal interface between stator and rotor. The inviscid analysis is used to embody the influence of potential interaction only and viscous analysis is used to embody the influences of both potential interaction and wake interaction at the same time. The potential-flow disturbance from the stator into a rotor passage and the periodic blockage effect of rotor produce the unsteady pressure on the blade surface in inviscid analysis. After the wake is cut by rotor, two counterrotating votical patterns flanking the wake centerline in the passage are generated. So, these phenomena magnify the unsteady pressure in viscous analysis than that in inviscid analysis. The resulting unsteady forces on the rotor, generated by the combined interaction of the two effects by potential and wake interaction, are discussed.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권4호
• /
• pp.161-166
• /
• 2014

An accurate gain-of-two amplifier, which successfully reduces the capacitor mismatch error is proposed. This amplifier has similar circuit complexity and linearity improvement to the capacitor error-averaging technique, but operates with two clock phases just like the conventional pipeline stage. This makes it suitable for high-speed, high-resolution analog-to-digital converters (ADCs). Two ADC architectures employing the proposed accurate gain-of-two amplifier are also presented. The simulation results show that the proposed ADCs can achieve 15-bit linearity with 8-bit capacitor matching.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.421-421
• /
• 2000

In this paper, robust two-degree-of-freedom controller for satellite antenna system which tracks reference signal is designed. Two-degree-of-freedom controller consists of a prefilter and a feedback controller to solve trade-off between robust stability and command response. The feedback controller is designed from specifications like stability, disturbance rejection and robustness via H$_{\infty}$ design technique. In the sequel, H$_2$ optimal prefilter is introduced to improve the command response. This suggests a two-step design, with different types of performance specifications at each stage. In practical problems, this may easily lead to a prefilter of unacceptably high order. In order to avoid high order prefilter we use a particular structure in which both the prefilter and the feedback controller share the same dynamics. H$_2$-prefilter technique proposed in this paper is verified by simulation.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 추계학술대회 및 정기총회
• /
• pp.295-299
• /
• 2002

This paper presents an image contrast enhancement technique for improving low contrast images. We applied fuzzy logic to develop an image contrast enhancement technique in the viewpoint of considering that the low pictorial information of a low contrast image is due to the vaguness or fuzziness of the multivalued levels of brightness rather than randomness. The fuzzy image contrast enhancement technique consists of three main stages, namely, image fuzzification, modification of membership values, and image defuzzification. In the stage of image fuzzification, we need to select a crossover point. To select the crossover point automatically the K-means algorithm is used. The problem of crossover point selection can be considered as the two-category, object and background, classification problem. The proposed method is applied to an experimental image with 256 gray levels and the result of the proposed method is compared with that of the histogram equalization technique. We used the index of fuzziness as a measure of image quality. The result shows that the proposed method is better than the histogram equalization technique.

• ETRI Journal
• /
• 제24권3호
• /
• pp.190-196
• /
• 2002

This paper presents millimeter wave monolithic microwave integrated circuit (MMIC) low noise amplifiers using a $0.15{\mu}m$ commercial pHEMT process. After carefully investigating design considerations for millimeter-wave applications, with emphasis on the active device model and electomagnetic (EM) simulation, we designed two single-ended low noise amplifiers, one for Q-band and one for V-band. The Q-band two stage amplifier showed an average noise figure of 2.2 dB with an 18.3 dB average gain at 44 GHz. The V-band two stage amplifier showed an average noise figure of 2.9 dB with a 14.7 dB average gain at 65 GHz. Our design technique and model demonstrates good agreement between measured and predicted results. Compared with the published data, this work also presents state-of-the-art performance in terms of the gain and noise figure.