• 대한한의학원전학회지
• /
• 제30권3호
• /
• pp.133-141
• /
• 2017

Objectives : As of 2013, South Korea ranked number one in the world in smartphone penetration rate with 67.6%. Unfortunately, with the rise of smart phone use, side effects such as fraud, loss of personal information, identity theft, formation and widening of a mobile information gap, and last, but not least, smart phone addiction, also increased. Methods : Seventh (7th)graders from a girls' junior high school in Seoul, the capital of South Korea, we reevaluated the Smart phone Addiction Proneness Scale (S-scale). Among the 9 students classified as high risk users, 5 were randomly selected for a study group, and the remaining 4 students, meanwhile, were designated as a control group. The study group received Korean medicine music therapy (KMMT) in a total of 8 sessions, each session lasting 50 minutes. Both pre- and post-interventions, the two groups completed the S-scale, Harris and Harris' concentration grid exercise, STAI, and STAXI-K. We analyzed the data by t-test and paired t-test using IBM SPSS Statistics. Results : KMMT had a significant influence on proneness to smart phone addiction (t=3.130, p=.035). KMMT had positive effects on concentration improvement (t=-2.935, p=.043), trait-anxiety symptoms improvement (t=2,992, p=.040), and anger-expression control (t=4.416, p=.012). Conclusions : KMMT had positive, improving effects on trait anxiety and anger expression, which in turn enhanced the improvement of concentration as well as the decrease of smart phone-addiction proneness.

• 한국광학회지
• /
• 제14권5호
• /
• pp.504-508
• /
• 2003

최근 전자산업계에 새롭게 널리 생산되는 마이크로 전자부품들은 왜곡이 최소화된 정밀한 외관 형상을 갖도록 제조되고 관리되지만, 측정 대상의 표면이 가시광 영역에서 광산란되는 특징을 가짐으로 인해, 기존의 피죠나 마이켈슨 형태의 비교간섭법으로는 고정밀의 삼차원 형상측정이 용이하지 아니하였다. 본 논문에서는 광섬유를 이용한 새로운 개념의 점회절 간섭계를 제안하고, 이를 광산란 거친표면의 대표적인 제품인 칩패키지와 실리콘 웨이퍼의 삼차원 형상 측정에 적용하였다. 측정결과 66 mm 측정영역에서 측정 형상오차 PV(peak-to-valley value) 5.6 $\mu\textrm{m}$, 분산값($\sigma$) 1.5 $\mu\textrm{m}$를 획득함으로써 기존의 비교 간섭 측정법에 비해 더욱 향상된 측정 정밀도를 획득하였다.

• 한국농림기상학회지
• /
• 제15권3호
• /
• pp.171-177
• /
• 2013

본 연구는 기상청에서 제공하는 강수 실황 혹은 예보로부터 농업부문에서 활용 가능한 수준의 상세한 강수분포도를 제작하기 위한 방안으로서, 레이더 반사강도를 KLAPS 5km 강수자료에 적용하여 1km 격자해상도로 상세화 하는 1단계와, 고해상도 DEM에 근거한 지표면 경사방향(지향면)에 따라 고도-강수량 회귀 계수를 달리하여 지형효과를 반영하는 2단계 등으로 이루어진 추정기법을 고안하였다. 이 기법의 현실세계 적용방법 모색 및 신뢰도 평가를 위해 경상남도 하동군 악양면을 실험 집수역으로 설정하고 2013년 1월부터 5월까지 총 19사례의 강수에 대해 기상청으로부터 KLAPS 강수자료를 수집하였다. 1단계로는 강수일의 24시간 적산 레이더에코 자료를 이용하여 1km 해상도로 자료의 규모를 축소하였다. 2단계로는 1km 격자점의 값을 가상의 관측자료로 삼아 270m 해상도에서 PRISM 기반의 지형효과를 반영한 강수량 분포도를 생성하였다. 실험 집수역에 13대의 무인기상관측장비를 다양한 고도 및 지형조건에서 설치하고, 추정된 강수분포도로부터 13개 지점에 해당하는 격자점의 자료를 추출하여 실측값과 비교하였다. 일 강수량 10mm 이상의 사례에서는 모든 관측지점에서 추정오차 감소효과가 인정되었으며, 특히 일강수량이 30mm 이상인 사례에서 평균 35% 이상의 오차감소효과를 확인하였다.

• 한국항공우주학회지
• /
• 제44권4호
• /
• pp.290-297
• /
• 2016

사각덕트에서 난류 유동장으로 분사되는 액체 제트의 액주 분열과 미립화 현상에 관한 LES를 수행하였다. 기체상태의 공기 유동 해석에 오일러리안 해법을 사용하고, 액적 추적을 위하여 라그랑지안 해법을 사용하여 기체-액체간 이상유동(two phase flow) 해석을 수행하였다. 액적 분열 모델, 아격자 스케일 모델 및 공간 차분법에 따른 액적 분열을 조사하였다. 액체 제트의 침투깊이를 경험식과 비교하였으며 경험식보다 약간 높음을 알 수 있었다. 제트 후류에서 사우터 평균직경에 대한 분석을 수행하였다.

• 한국산학기술학회논문지
• /
• 제18권2호
• /
• pp.737-742
• /
• 2017

본 최근 기존의 모습과는 다른 고층건물의 형태가 대도시에서 랜드마크로서 주목을 끌고 있으며 혁신적인 건물형태에 대한 탐색은 건축분야에서 지속적으로 이루어질 것이다. 본 연구에서는 소규모의 구조체에 활용되고 있는 $Isotruss^{(R)}$ 그리드를 건물의 외주골조에 적용하여 구조적 성능을 검토하였다. 구조적 거동을 비교하기 위해 다이아그리드 구조시스템을 준거로 하였다. 동일한 규모의 16층, 32층, 48층 건물을 두가지의 구조시스템으로 설계하였다. 아이소트러스 그리드 구조 부재의 선정은 예비적 설계단계로 생각하여 다이아그리드의 강성에 기준한 설계방법을 이용하였다. 경사기둥의 각도로 아이소트러스 구조는 $59^{\circ}$, 다이아그리드 구조는 $68.2^{\circ}$로 하였다. 횡강성, 철골량, 외부골조의 횡력 부담비율, 기둥의 축력 강도비, 고유 진동수를 비교하였다. 6개의 건물 모델을 해석한 결과 두 구조시스템의 구조적 성능은 유사하나 외주골조의 횡하중 분담율이 아이소트러스 그리드 구조가 93.3%로 다이아그리드 구조의 88.7% 보다 약간 커서 코어 기둥의 배치에 있어 유리하다고 볼 수 있다. 따라서 본 연구에서 제안하는 아이소트러스 그리드 시스템은 입면형태가 독특할 뿐만 아니라 기존의 구조시스템과 동등한 구조적 성능을 보유한 것으로 보인다.

• 한국전산유체공학회지
• /
• 제15권2호
• /
• pp.21-27
• /
• 2010

Immersed boundary lattice Boltzmann method (IBLBM) has been applied to simulate a turbulent flow over circular cylinder in a flow field effectively. Although IBLBM is very effective method to simulate the flow over a complex shape of obstacle in the flow field regardless of the constructed grids in the calculation domain, the results, however, become numerically unstable in high reynolds number flow. The most effective suggestion to archive the numerical stability in high Reynolds number flow is applying the multiple relaxation time (MRT) model instead of single relaxation time(SRT) model in the collision term of lattice Boltzmann equation. In the research MRT model for IBLBM was introduced and comparing the numerical results obtained by applying SRT and MRT. The hydraulic characteristic of cylinder in a flow field between two parallel plate at the range of $Re{\leqq}2000$represented and it is also compared the drag and lifting coefficients of the cylinder calculated by IBLBM with SRT and MRT model.

• 농업과학연구
• /
• 제45권3호
• /
• pp.521-532
• /
• 2018

In recent decades, the dry stream phenomena of small and medium sized rivers have been attracting much attention as an important social problem. To prevent dry stream phenomena, it is necessary to build an infrastructure that manages rivers. To accurately determine the progress of dry stream phenomena, it is necessary to continuously measure the discharge and other hydrological factors for small and medium sized rivers. However, until now, the flow data for small and medium rivers in Korea has been insufficient. To overcome the lack of supporting data for supporting rational decision-making in policy and project implementation, a short- and long-term hydrological model was developed that takes into consideration hydrological changes such as the increase of the impervious area due to urban development and groundwater pumping, the construction of a large-scale sewage treatment plant, the maintenance of stream-oriented rivers, etc. In the developed model, the distributed grid is represented by three layers: Surface flow, interflow, and groundwater flow. The surface flow and intermediate flow flowed along the flow direction, and the groundwater flow was calculated by a two-dimensional groundwater analysis model such that the outflow occurred in all directions without a specific flow direction. The effects of land use and cover on evapotranspiration and infiltration and the effects of multiple landscapes can be simulated in the developed model.

• 디지털산업정보학회논문지
• /
• 제11권4호
• /
• pp.89-97
• /
• 2015

In this paper, a method of color image segmentation based on DBSCAN(Density Based Spatial Clustering of Applications with Noise) using compactness of superpixels and texture information is presented. The DBSCAN algorithm can generate clusters in large data sets by looking at the local density of data samples, using only two input parameters which called minimum number of data and distance of neighborhood data. Superpixel algorithms group pixels into perceptually meaningful atomic regions, which can be used to replace the rigid structure of the pixel grid. Each superpixel is consist of pixels with similar features such as luminance, color, textures etc. Superpixels are more efficient than pixels in case of large scale image processing. In this paper, superpixels are generated by SLIC(simple linear iterative clustering) as known popular. Superpixel characteristics are described by compactness, uniformity, boundary precision and recall. The compactness is important features to depict superpixel characteristics. Each superpixel is represented by Lab color spaces, compactness and texture information. DBSCAN clustering method applied to these feature spaces to segment a color image. To evaluate the performance of the proposed method, computer simulation is carried out to several outdoor images. The experimental results show that the proposed algorithm can provide good segmentation results on various images.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.138-141
• /
• 2002

There are continuous efforts in the electronics industry to a reduced electronic package size. Reducing the size of electronic packages can be achieved by a variety of means, and for ball grid array(BGA) packages an effective method is to decrease the pitch between the individual balls. Chip scale package(CSP) and BGA are now one of the major package types. However, a reduced package size has the negative effect of reducing board-level reliability. The reliability concern is for the different thermal expansion rates of the two-substrate materials and how that coefficient CTE mismatch creates added stress to the BGA solder joint when thermal cycled. The point of thermal fatigue in a solder joint is an important factor of BGA packages and knowing at how many thermal cycles can be ran before failure in the solder BGA joint is a must for designing a reliable BGA package. Reliability of the package was one of main issues and underfill was required to improve board-level reliability. By filling between die and substrate, the underfill could enhance the reliability of the device. The effect of underfill on various thermomechanical reliability issues in $\mu$BGA packages is studied in this paper.

• Advances in aircraft and spacecraft science
• /
• 제4권3호
• /
• pp.297-316
• /
• 2017

With rapid growth in the complexity of large scale engineering systems, the application of multidisciplinary analysis and design optimization (MDO) in the engineering design process has garnered much attention. MDO addresses the challenge of integrating several different disciplines into the design process. Primary challenges of MDO include computational expense and poor scalability. The introduction of a distributed, collaborative computational environment results in better utilization of available computational resources, reducing the time to solution, and enhancing scalability. SORCER, a Java-based network-centric computing platform, enables analyses and design studies in a distributed collaborative computing environment. Two different optimization algorithms widely used in multidisciplinary engineering design-VTDIRECT95 and QNSTOP-are implemented on a SORCER grid. VTDIRECT95, a Fortran 95 implementation of D. R. Jones' algorithm DIRECT, is a highly parallelizable derivative-free deterministic global optimization algorithm. QNSTOP is a parallel quasi-Newton algorithm for stochastic optimization problems. The purpose of integrating VTDIRECT95 and QNSTOP into the SORCER framework is to provide load balancing among computational resources, resulting in a dynamically scalable process. Further, the federated computing paradigm implemented by SORCER manages distributed services in real time, thereby significantly speeding up the design process. Part 1 covers SORCER and the algorithms, Part 2 presents results for aircraft panel design with curvilinear stiffeners.