NUMERICAL STUDY ON TURBULENT FLOW OVER CYLINDER USING IMMERSED BOUNDARY LATTICE BOLTZMANN METHOD WITH MULTI RELAXATION TIME

다중완화시간 가상경계볼쯔만법을 이용한 실린더 주위의 난류유동해석

  • 김형민 (경기대학교 기계시스템공학과)
  • Received : 2010.03.02
  • Accepted : 2010.06.02
  • Published : 2010.06.30

Abstract

Immersed boundary lattice Boltzmann method (IBLBM) has been applied to simulate a turbulent flow over circular cylinder in a flow field effectively. Although IBLBM is very effective method to simulate the flow over a complex shape of obstacle in the flow field regardless of the constructed grids in the calculation domain, the results, however, become numerically unstable in high reynolds number flow. The most effective suggestion to archive the numerical stability in high Reynolds number flow is applying the multiple relaxation time (MRT) model instead of single relaxation time(SRT) model in the collision term of lattice Boltzmann equation. In the research MRT model for IBLBM was introduced and comparing the numerical results obtained by applying SRT and MRT. The hydraulic characteristic of cylinder in a flow field between two parallel plate at the range of $Re{\leqq}2000$represented and it is also compared the drag and lifting coefficients of the cylinder calculated by IBLBM with SRT and MRT model.

Keywords

References

  1. 1986, Frisch, U., Hasslacher, B. and Pomeau, Y., "Lattice-gas automata for the Navier-Stokes equations," Phys. Rev. Lett., Vol.56, pp.1505-1508. https://doi.org/10.1103/PhysRevLett.56.1505
  2. 1954, Bhatnagar, P.L., Gross, E.P. and Krook, M., "Amodel for collision processes in gases. I:small amplitude processes in charged and neutral one-component system," Phys. Rev., Vol.94, pp.511-525. https://doi.org/10.1103/PhysRev.94.511
  3. 1998, Chen, S. and Doolen, G., "Lattice Boltzmann method for fluid flows," Ann. rev. Fluid Mech., Vol.30, pp.329-364. https://doi.org/10.1146/annurev.fluid.30.1.329
  4. 2000, Renwei, M., Luo, L.-S. and Shyy, W. "An Accurate Curved Boundary Treatment in the Lattice Boltzmann Method," ICASE Report, No.2000-6.
  5. 2003, Lallemand, P. and Luo, L.-S., "Lattice Boltzmann method for moving boundary," Journal of Computational Physics, Vol.184. pp.406-421. https://doi.org/10.1016/S0021-9991(02)00022-0
  6. 2007, Kim, H.M. and Jhon, M.S., "Numerical Study on Flow Over Oscillating Circular Cylinder Using Curved Moving Boundary Treatment," KSME Journal B, Vol.31, No.11, pp.895-903.
  7. 1988, McNamara, G. and Zanetti, G., "Use of the Boltzmann equation to simulate lattice-gas Automata," Phys. Rev. Let.t, Vol.61, pp.2332-2335. https://doi.org/10.1103/PhysRevLett.61.2332
  8. 1989, Higuera, F. and Jimenez, J., "Boltzmann approach to lattice gas simulations," Europhys. Lett., Vol.9, pp.663-668. https://doi.org/10.1209/0295-5075/9/7/009
  9. 1991, Koelman, JMVA, "A simple lattice Boltzmann scheme for Navier-Stokes fluid flow," Europhys. Lett., Vol.15, pp.603-607. https://doi.org/10.1209/0295-5075/15/6/007
  10. 1990, Qian, Y.H., "Lattice Gas and Lattice Kinetic Theory Apply to Navier-Stokes Equation," Ph'D Thesis, University et Peirre Marie Curie, Paris.
  11. 2002, d'Humieres, D., Ginzburg, I., Krafczyk, M., Lallemand, P. and Luo, L.-S., "Multiple-Relaxation-Time Lattice Boltzmann Models in Three Dimensions," Philosophical Transactions of the Royal society A, Vol.360, pp.437-451. https://doi.org/10.1098/rsta.2001.0955
  12. 2001, Sauro, S., Lattice Boltzmann Equation for Fluid Dynamics and Beyond, Oxford University Press, USA.
  13. 1996, Schafer, M., "Benchmark Computations of laminar flow around a cylinder, Flow simulation with high-performance computation II, Notes on Numerical fluid Mechanics," Vieweg Verlag, Braunschweig, Germany, Vol.52, pp.547-566.
  14. 2009, Mussa, A., Asinari, P. and Luo, L.-S., "Lattice Boltzmann Simulation of 2D flows past two tandem cylinders," Journal of computational physics, Vol.228, pp.983-999. https://doi.org/10.1016/j.jcp.2008.10.010
  15. 2006, Latt, J. and Chopard, B., "Lattice Boltzamnn method with regularized non-equilibrium distribution functions," Mathematics and Computers in Simulation, Vol.72, pp.165-168. https://doi.org/10.1016/j.matcom.2006.05.017