• 한국전기전자재료학회논문지
• /
• 제20권5호
• /
• pp.403-409
• /
• 2007

In this paper, effects of the trench angle($\theta$) on the breakdown voltage according to the process parameters of p-base region and doping concentrations of n-drift region in a Trench Gate IGBT (TIGBT) device were analyzed by computer simulation. Processes parameters used by variables are diffusion temperature, implant dose of p-base region and doping concentration of n-drift region, and aspects of breakdown voltage change with change of each parameter were examined. As diffusion temperature of the p-base region increases, depth of the p-base region increases and effect of the diffusion temperature on the breakdown voltage is very low in the case of small trench angle($45\;^{\circ}$) but that is increases 134.8 % in the case of high trench angle($90\;^{\circ}$). Moreover, as implant dose of the p-base region increases, doping concentration of the p-base region increases and effect of the implant dose on the breakdown voltage is very low in the case of small trench angle($45\;^{\circ}$) but that is increases 232.1 % in the case of high trench angle($90\;^{\circ}$). These phenomenons is why electric field concentrated in the trench is distributed to the p-base region as the diffusion temperature and implant dose of the p-base increase. However, effect of the doping concentration variation in the n-drift region on the breakdown voltage varies just 9.3 % as trench angle increases from $45\;^{\circ}$ to $90\;^{\circ}$. This is why magnitude of electric field concentrated in the trench changes, but direction of that doesn't change. In this paper, respective reasons were analyzed through the electric field concentration analysis by computer simulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.323-326
• /
• 2003

In this paper, a new small size Lateral Trench Electrode Power MOSFET is proposed. This new structure, called "LTEMOSFET"(Lateral Trench Electrode Power MOSFET), is based on the conventional MOSFET. The entire electrode of LTEMOSFET is placed in trench oxide. The forward blocking voltage of the proposed LTEMOSFET is improved by 1.6 times with that of the conventional MOSFET. The forward blocking voltage of LTEMOSFET is 250V. At the same size, a increase of the forward blocking voltage of about 1.6 times relative to the conventional MOSFET is observed by using TMA-MEDICI which is used for analyzing device characteristics. Because the electrodes of the proposed device are formed in trench oxide, the electric field in the device are crowded to trench oxide. We observed that the characteristics of the proposed device was improved by using TMA-MEDICI and that the fabrication of the proposed device is possible by using TMA-TSUPREM4.

• 한국진공학회지
• /
• 제6권3호
• /
• pp.267-274
• /
• 1997

고밀도 유도결합 $Cl_2$ 및 HBr/$Cl_2$ 플라즈마를 이용하여 차세대 반도체 집적회로에 사용가능한 STI(Shallow Trench Isolation)구조에서 trench 식각시 trench etch profile 및 격자손상에 영향을 미치는 공정변수의 효과에 대하여 연구하였다. 식각결과 $Cl_2$만을 사용한 경우에는 trench 식각공정 동안 화학적 측면식각의 증가로 인하여 등방성 식각이 얻어지고 이는 유도입력 전력이 증가하고 바이어스 전압이 감소함에 따라 이의 경향이 증가하였다. 측면식각의 정도는 $Cl_2$에 $N_2$ 및 $O_2$의 첨가에 따라 감소하였다. 순수 HBr을 사용한 경우에 있어서는 Br 라디칼이 Cl 라디칼에 비하여 자발적인 실리콘 식각의 민감도가 감소하여 positive angle의 식각형상이 얻어졌으며 HBr내에 $Cl_2$의 증가에 따라 이방성 식각이 얻어졌 다. 물리적인 격자손상을 투과전자현미경으로 관찰한 결과 <$Cl_2/N_2$및 HBr을 함유한 식각가 스를 사용한 경우에 trench표면에서 결함이 관찰되었다.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.283-289
• /
• 2012

이 논문에서 Trench Power MOSFET의 스위칭 성능을 향상시키기 위한 Separate Gate Technique(SGT)을 제안하였다. Trench Power MOSFET의 스위칭 성능을 개선시키기 위해서는 낮은 gate-to-drain 전하 (Miller 전하)가 요구된다. 이를 위하여 제안된 separate gate technique은 얇은(~500A)의 poly-si을 deposition하여 sidewall을 형성함으로서, 기존의 Trench MOSFET에 비해 얇은 gate를 형성하였다. 이 효과로 gate와 drain에 overlap 되는 면적을 줄일 수 있어 gate bottom에 쌓이는 Qgd를 감소시키는 효과를 얻었고, 이에 따른 전기적인 특성을 Silvaco T-CAD silmulation tool을 이용하여 일반적인 Trench MOSFET과 성능을 비교하였다. 그 결과 Ciss(input capacitance : Cgs+Cgd), Coss(output capacitance : Cgd+Cds) 및 Crss(reverse recovery capacitance : Cgd) 모두 개선되었으며, 각각 14.3%, 23%, 30%의 capacitance 감소 효과를 확인하였다. 또한 inverter circuit을 구성하여, Qgd와 capacitance 감소로 인한 24%의 reverse recovery time의 성능향상을 확인하였다. 또한 제안된 소자는 기존 소자와 비교하여 어떠한 전기적 특성저하 없이 공정이 가능하다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2004년도 봄 학술발표회 논문집
• /
• pp.235-242
• /
• 2004

In this study numerical and experimental studies are conducted to examine the wave screening effectiveness of trenches. The numerical study is based on a finite element model of a "sandbox" with Lysmer-Kuhlemeyer-type absorbing boundaries. Using the model, the screening effectiveness of trench is studied for different trench dimensions and distance from source and receiver to trench. The results of the numerical modeling are compared with the results of the ultrasonic experiment which is performed on a acrylic block with a drilled rectangular cut. These results show that the screening effectiveness of the trench is nearly equal if the depth of trench is lager than 60 % of the surface wave length. If is also shown that if the distance between the trench and the source is lager than twice the surface wave length, the thickness of the trench does not affect the screening effectiveness.

• 한국전기전자재료학회논문지
• /
• 제19권10호
• /
• pp.912-917
• /
• 2006

In this paper, Trench emitter electrode IGBT structure is proposed and studied numerically using the device simulator, MEDICI. The breakdown voltage, on-state voltage drop, latch up current density and turn-off time of the proposed structure are compared with those of the conventional trench gate IGBT(TIGBT) structures. Enhancement of the breakdown voltage by 19 % is obtained in the proposed structure due to dispersion of electric field at the edge of the bottom trench gate by trench emitter electrode. In addition, the on-state voltage drop and the latch up current density are improved by 25 %, 16 % respectively. However increase of turn-off time in proposed structures are negligible.

• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.551-554
• /
• 2014

This paper was showed latch up characteristics of super junction power MOSFET by parasitic thyristor according to trench etch angle. As a result of research, if trench etch angle of super junction MOSFET is larger, we obtained large latch up voltage. When trench etch angle was $90^{\circ}$, latch up voltage was more 50 V. and we got 700 V breakdown voltage. But we analyzed on resistance. if trench etch angle of super junction MOSFET is larger, we obtained high on resistance. Therefore, we need optimal point by simulation and experiment for solution of trade off.

• 한국전기전자재료학회논문지
• /
• 제26권10호
• /
• pp.713-719
• /
• 2013

Power MOSFET operate voltage-driven devices, design to control the large power switching device for power supply, converter, motor control, etc. We have optimal designed planar and trench gate power MOSFET for high breakdown voltage and low on resistance. When we have designed $6,580{\mu}m{\times}5,680{\mu}m$ of chip size and 20 A current, on resistance of trench gate power MOSFET was low than planar gate power MOSFET. The on state voltage of trench gate power MOSFET was improved from 4.35 V to 3.7 V. At the same time, we have designed unified field limit ring for trench gate power MOFET. It is Junction Termination Edge type. As a result, we have obtained chip shrink effect and low on resistance because conventional field limit ring was convert to unify.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1337-1339
• /
• 1998

The trench termination scheme is introduced for high voltage devices. The curvature of the depletion region at field limiting ring is critical factor to determine the breakdown voltage. The smooth curvature of the depletion junction alleviate the electric field crowding effect around this region. In the trench field limiting ring, the radius of the depletion region is smaller than conventional field limiting ring, but the distance between every trench is spaced small enough to punchthrough before initiation of local breakdown. The trench field limiting ring on silicon can ne formed by RIE followed by oxidation on side wall surface of the trench, and polysilicon filling. The combined termination of this trench floating field ring and field plate have been designed and analyzed. The breakdown simulation by 2-dimensional TCAD shows that the cylindrical junction breakdown voltage for substrate doping might be 99 percent of the ideal breakdwon voltage for substrate doping concentration of $3\times10^{14}cm^{-3}$ with about $100{\mu}m$ of lateral termination width.

• 한국전기전자재료학회논문지
• /
• 제30권2호
• /
• pp.63-66
• /
• 2017

This research was about shielded trench gate power MOSFET for low voltage and high speed. We used T-CAD tool and carried out process and device simulation for exracting design and process parameters. The exracted parameters was used to design shieled and conventional trench gate power MOSFET. And The electrical characteristics of shieled and conventional trench gate power MOSFET were compared and analyzed for their power device applications. As a result of analyzing electrical characteristics, the recorded breakdown voltages of both devices were around 120 V. The electric distributions of shielded and conventional trench gate power MOSFET was different. But due to the low voltage level, the breakdown voltage was almost same. And the other hand, the threshold voltage characteristics of shielded trench gate power MOSFET was superior to convention trench gate power MOSFET. In terms of on resistance characteristics, we obtained optimal oxied thickness of $3{\mu}m$.