• Steel and Composite Structures
• /
• v.26 no.6
• /
• pp.733-743
• /
• 2018

This paper presents post-buckling responses of a simply supported laminated composite beam subjected to a non-follower axially compression loads. In the nonlinear kinematic model of the laminated beam, total Lagrangian approach is used in conjunction with the Timoshenko beam theory. In the solution of the nonlinear problem, incremental displacement-based finite element method is used with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. The distinctive feature of this study is post-buckling analysis of Timoshenko Laminated beams full geometric non-linearity and by using finite element method. The effects of the fibber orientation angles and the stacking sequence of laminates on the post-buckling deflections, configurations and stresses of the composite laminated beam are illustrated and discussed in the numerical results. Numerical results show that the above-mentioned effects play a very important role on the post-buckling responses of the laminated composite beams.

• Structural Engineering and Mechanics
• /
• v.66 no.1
• /
• pp.27-36
• /
• 2018

The objective of this work is to analyze geometrically nonlinear static analysis a simply supported laminated composite beam subjected to a non-follower transversal point load at the midpoint of the beam. In the nonlinear model of the laminated beam, total Lagrangian finite element model of is used in conjunction with the Timoshenko beam theory. The considered non-linear problem is solved considering full geometric non-linearity by using incremental displacement-based finite element method in conjunction with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. In the numerical results, the effects of the fiber orientation angles and the stacking sequence of laminates on the nonlinear deflections and stresses of the composite laminated beam are examined and discussed. Convergence study is performed. Also, the difference between the geometrically linear and nonlinear analysis of laminated beam is investigated in detail.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.1
• /
• pp.362-371
• /
• 2018

This work proposes FPGA implementation of Carrier Disposition PWM for closed loop seven level diode clamped multilevel inverter in speed control of induction motor. VLSI architecture for carrier Disposition have been introduced through which PWM signals are fed to the neutral point seven level diode clamped multilevel using which the speed of the induction motor is controlled. This proposed VLSI architecture makes the power circuit to work better with reduced stresses across the switches and a very low voltage and current total harmonic distortion (THD). The output voltages, currents, torque & speed characteristics for seven level neutral point diode clamped multilevel inverter for AC drive was studied. It has observed the proposed scheme introduces less distortion and harmonics. The results were validated using real time results.

• Journal of Power Electronics
• /
• v.16 no.1
• /
• pp.173-181
• /
• 2016

In this paper, a new technique for harmonic optimization in cascaded H-bridge 7-level inverters is proposed. The suggested strategy is based on minimizing an objective function which simultaneously optimizes the converter utilization and Total Harmonic Distortion (THD). The Switch Utilization Ratio (SUR) is formulized for both the phase and line-line voltages of a 7-level inverter and is considered in the final objective functions. Based upon the SUR formula, utilization ratio enhancement will reduce the value of feeding DC links, which improves the efficiency and lifetime of the circuit components due to lower voltage stresses and losses. In order to achieve more effective solution in different modulation indices, it is assumed that the DC sources can be altered. Experimental validation is presented based on a three-phase 7-level inverter prototype.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.3
• /
• pp.189-198
• /
• 2017

Purpose: This study aims to analyze the stress distribution of mandibular molar restoration supported by the implants with external hex and internal taper abutment connection design. Materials and Methods: Models of external connection (EXHEX) and internal connection (INCON) implants, corresponding abutment/crowns, and screws were developed. Supporting edentulous mandibular bony structures were designed. All the components were assembled and a finite element analysis was performed to predict the magnitude and pattern of stresses generated by occlusal loading. A total of 120 N static force was applied both by axial (L1) and oblique (L2) direction. Results: Peak von Mises stresses produced in the implants by L2 load produced 6 - 15 times greater than those by L1 load. The INCON model showed 2.2 times greater total amount of crown cusp deflection than the EXHEX model. Fastening screw in EXHEX model and upside margin of implant fixture in INCON model generated the peak von Mises stresses by oblique occlusal force. EXHEX model and INCON model showed the similar opening gap between abutment and fixture, but intimate sealing inside the contact interface was maintained in INCON model. Conclusion: Oblique force produced grater magnitudes of deflection and stress than those by axial force. The maximum stress area at the implant was different between the INCON and EXHEX models.

• Applied Biological Chemistry
• /
• v.25 no.3
• /
• pp.135-141
• /
• 1982

Two rice cultivars, Jinju and Iri 348, were used to compare the changes in the contents of some organic metabolites and ions and in some enzyme levels under water-and salt-stressed conditions. The water loss and proline accumulation under water and salt stresses were accelerated more in the salt-sensitive cultivar Iri 348 than in the salt-tolerant Jinju. The contents of crude protein, total free amino acids, proline and polyphenols increased under water-or salt-stressed rice, but that of reducing sugar increased under water stress only. The water-and salt-stresses induced the high ratio of low molecular organic solutes to crude protein in Jinju but not in Iri 348. The ratio of total free amino acids to crude protein increased under the stressed conditions was likely due to high protease activity. The contents of $Na^+$ and $Cl^-$ were higher in Iri 348 than in Jinju. Iri 348 had higher values of $Na^+/Ca^{2+}$ and monovalent/divalent of cations, but lower of $K^+/Na^+$ than Jinju Rice. The further studies should emphasize to set the correlations between these ratios and tolerance to water and salt stresses among rice cultivars.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.1
• /
• pp.87-99
• /
• 1993

Many studies have been reported on the successful replacement of missing teeth with osseointegrated dental Implants. However, little research has been carried out on the bio-mechanical aspect of the stress on the surrounding bone of the free-standing type of dental implant prostheses. This experimental study was aimed to analyze the stress distribution pattern on the supporting tissues depending upon the position of osseointegrated implants supporting fixed bridges. In the cases of unilateral partially edentulous mandible (the 2nd premolar and the 1st and 2nd molars missing), two osseointegrated implants were placed at the 2nd premolar and 2nd molar sites (Model A) , the 1st and 2nd molar sites (Model B, Anterior cantilevered type), the 2nd premolar and 1st molar sites (Model C, Posterior cantilevered type). Chewing forces of dentate patients and denture wearer were applied vertically on the 2nd premolar, the 1st molar, and the 2nd molar of each model. A 3-Unit fixed partial denture was constructed at each model and cantilevered extension parts were involved in Model B and Model C. Two dimensional finite element analysis was undertaken. The commercial software (Super SAP) for IBM 16 bit personal computer was utilized. The results were as follows : 1. The magnitude of applied load influenced on the total value of stresses, but did not in-fluence on the pattern of stress distribution. 2. The magnitude of stress developed from the supporting tissues were in order of Model C,Model A,Model B. 3. High stresses were concentrated on the cervical and apical portion of the implant/bone interface. 4. A difference of the stress magnitude on the implant/bone interface between mesial and distal implant was most prominant in Model C and in order of Model A and Model B. 5. The stresses developed in Model A were evenly distributed throughout both implants. 6. The stresses concentrated on the cervical portion of cantilevered side were higher in the posterior cantilevered type than in the anterior cantilevered type.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.707-716
• /
• 2009

The levels of psychosocial stresses and fatigue of firemen were analyzed to reveal the various factors related to them. The self-administered questionnaires were performed to 262 firemen ill Cheonsju City. In terms of various levels of psychosocial stresses, 12.2% were under potential stresses, 87.8% were under high-level of stress, but healthy group was not found. The levels of fatigue symptoms divided by the median of total scores was 51.1% of low levels, and 48.9% of high levels. Multiple stepwise analysis revealed that the factors or influence on psychosocial stresses with explanatory powers of 11.5% included subjective health status, job satisfaction, job demand and alcohol drinking habits. The factors of influence on fatigue symptoms with explanatory powers of 9.0% included subjective health and regular exercises. The study results indicate that the level of stress or fatigue is so complicatedly influenced by variable factors. Thus the effective strategy for stress and fatigue reduction among firemen should include additional programs focusing on health promotion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.189-199
• /
• 2017

This study investigated the effects of life stress, cultural adaptation stress, and academic satisfaction amongst a total of 283 20's Chinese students majoring in cosmetology at colleges in Seoul. For this, data was collected from February to March 2017. The frequency analysis was conducted to verity the general characteristic of Chinese student studying in Korea who are study objects while utilizing SPSS Statistics V22.0 for data processing and analysis while the factor analysis and reliability analysis were conducted to investigate the validity of measurement tool and evaluate the reliability. Moreover, the regression analysis between variables and regression analysis were utilized. The results found the following: First, in terms of life stress, as peer relationship, appearance stress, economic stress, family relationship stress and academic stresses decreased, their academic satisfaction increased. Second, regarding cultural adaptation stress, as interpersonal and living culture stresses were lowered, academic satisfaction increased. Therefore, this study targets to derive implications on an efficient plan to improve the academic satisfaction of Chinese students studying in the Republic of Korea by developing and providing a proper academic program with a decent support system in terms of culture, life, and education after investigating their life and cultural adaptation stresses.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.34 no.2
• /
• pp.114-119
• /
• 2014

Salinity and drought stresses are probably the most significant abiotic factor limiting plant's growth, also negatively affect seed germination and early seedling development. To study on effect of NaCl and PEG stress on seed germination and gene expression pattern of tall fescue, the levels of NaCl and PEG-induced water stresses were determined in first experiment. Different concentration of NaCl (0 to 350 mM) and PEG (0 to 30%) were used for seed treatment. Seed Germination percentage reduced with increasing osmotic potential of growth medium either due to NaCl or PEG. Seeds were not germinate at 350 mM NaCl or 30% PEG treatment. On the basis of the results, Kentucky31(E-) had more resistant than Fawn in both stress conditions. Furthermore, we have used an annealing control primer-based differential display reverse transcription-polymerase chain reaction method to identify salt- and drought stress-induced differentially expressed genes (DEGs) in tall fescue leaves. Using 120 annealing control primers, a total of 4 genes were identified and sequenced. The possible roles of the identified DEGs are discussed in the context of their putative role during salinity and drought stresses.