• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.94-101
• /
• 2019

본 연구에서는 초음파 용접기의 진동에너지를 모재에 전달하는 금속 용접용 혼의 형상설계를 위해 해석적 기법을 적용하였으며, 20kHz 영역에서 사용되는 한파장 바 형상을 갖는 용접용 혼의 형상설계를 위해 FEM(Finite Element Method)을 사용하였다. 봉의 종진동 이론을 Ansys APDL(Ansys Parametric Design Language)에 적용하여 혼의 형상을 최적화하였다. 적절한 혼의 형상을 도출하기 위해 진동의 입력면과 출력면의 면적비와 혼의 축방향 길이비를 이용하여 총 25가지의 모델을 설계하였으며, Modal 해석과 Harmonic 해석을 통해 균일한 진동특성을 확보하고자 하였다. 스텝 바혼의 끝단부(팁)의 균일도 90%이상을 확보하기 위해 Harmonic 해석을 통해 길이비, 면적비를 결정하였고 이에 따라 혼의 총길이 130mm, 스텝 길이 65mm, 출력단 면적 28.79mm의 혼을 설계하였다. 설계치수를 바탕으로 Titanium (Ti-6Al-4V)-GR5 재료를 이용하여 혼을 제작하였다. 또한, 별도로 구성된 초음파 용접시스템을 이용하여 혼의 끝단부의 진동 진폭률 및 변위특성을 평가하였다. 최적화된 혼의 진폭률은 51%까지 향상됨을 확인하였다. 최종적으로 균일한 종방향 스텝 바혼을 설계하였으며, 끝단부(팁)의 균일도 97.4%이상을 확보하였다.

• 한국해안·해양공학회논문집
• /
• 제23권4호
• /
• pp.313-325
• /
• 2011

황해 조석모의를 위한 유한요소 격자체계가 h-상세화에 의해 구축되어 이전연구(서, 1999b) 14 K 절점에 비해 210 K로 연안지역 해상이 특별하게 고려되었다. 격자생성시 인접절점간 수심변화, 무차원 조석파장비가 고려되어 전체절점의 약 1/4이 수심 5 m 내외 연안역에 집중적으로 분포되었다. 수심에 ETOPO1 및 30초 정밀자료가 적용되었고 개방경계에 FES2004로부터 자동추출된 8대분조가 정의되었다. 조석모의에는 비선형 3차원 조화모형이 수립되었으며, 연직난류와 바닥마찰계수의 변화에 따른 서해연안의 조석확폭이 모의되었고, 8대분조 및 $M_4,$ $MS_4$ 등 비선형 천해조석과 $M_f$ 및 $M_{sf}$의 장주기 등이 재현되었다. 천문조뿐만 아니라 비선형 항의 반복에 의해 계산되는 천해조 해석결과에 마찰계수의 공간적변화가 미치는 영향이 지대하여, 조석 주기별로 다른 값을 적용하는 것이 제시되었다. 조석 비대칭성 분포를 파악하고자 진폭비 $M_4/M_2$와 위상차 $2g(M_2)-g(M_4)$를 계산하였는데, 우리나라 서해연안에 조석왜곡 비율이 0.2에 다다르는 등 천해역 특성이 뚜렷하며 목포해역 전면에 폭넓은 낙조우세가 재현되었다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1527-1527
• /
• 2001

Glucose, fructose and sucrose being the main sugars that can be found in natural fruit juice. Many instrumental methods, such as GC, LC, electrochemical or spectrometric methods provide information about both the total content of sugars and the specific concentration of each carbohydrate[1]. The simplicity of sample handling and measurement in the near IR(NIR) wavelength region, which allows the use of long pathlength, optical glass cells and optical fibers, makes NIR a good alternative for sugar determination [2]. In the present study, six varieties of persian grapes were harvested at intervals through august to october and analysed for sugars by NIR. The results were processed by principal component regression (PCR) and partial least squares (PLS) analysis. Sample juice was prepared by squeezing through gauze from crashed grape. This solution was treated by zinc ferrocyanide prior to analysis in order to eliminate colored compounds and all optically active nonsugar substances. For glucose and fructose the most characteristic wavelengths were 1456nm corresponding to the first harmonic O-H stretching and the second at 2062nm corresponding to O-H stretching and deformation; secondary characteristic combination bands were also seen at 2265 nm (O-H and C-C stretching) and at 2240 nm (C-H and C-C stretching). However these spectra were taken over a wavelength range from 1100-2500nm at room temperature of 25-$30^{\circ}C$. To test the accuracy of the described procedure, samples of six varieties of grape were analysed by the proposed NIR and a standard method[2]. Good agreement were found between these two sets of the results. To perform the recovery studies , samples of grape juices previously analysed by the proposed method, were spiked with known amounts of each individual sugars and then analysed again. Relative standard deviations varied from 1.4 to 1.8% for six independent measurements of individual and total sugar concentration. In the analysis of real and synthetic samples, precise and accurate results were obtained , providing accuracy errors lower than 1.9% in all cases. Average recoveries of ${97}{\pm}{4%}$ for total sugar and between ${95}{\pm}{5%}$ and ${99}{\pm}{2%}$ for sing1e sugars demonstrate the applicability of the methodology developed to the direct analysis of grape Juice.

• 한국결정학회지
• /
• 제16권2호
• /
• pp.141-148
• /
• 2005

It is well known that the general metals have a lot of grain boundaries. The grain boundaries play a negative role to increase the resistivity and to decrease the conductivity. The small resistivity and the large conductivity have been a goal of the material scientists, and no signal noise, perfect signal transfer, and the realization of the real sound are the dream of electronic engineers and audio manias. Generally, oxygen free copper (OFC) and Ohno continuous casting (OCC) copper cables have been used for the purpose of the precise signal transfer and low noise. However they still include a lot of grain boundaries. In our study, we have grown the single crystal by the Czochralski method and succeeded to produce single crystal wires from the crystal in the dimension of $0.5{\times}0.5{\times}2500mm$. The produced wire still possesses very good single crystal properties. We observed the structure of the wire, and measured the resistance and impedance. Glow Discharge Spectrometer (GDS) was used for analyzing the compositions of copper single crystals and commercial copper. Current-Voltage curve, resistance, total harmonic distortion and speaker frequency response were measured for comparing electrical and acoustic properties of two samples.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.842-849
• /
• 2009

The objective of this study is to investigate design parameters of a tuned liquid column damper(TLCD), which is affected by various excitation amplitudes, through shaking table test. Design parameters of a TLCD are examined based on the equivalent tuned mass damper(TMD) model of a TLCD, in which the nonlinear damping of a TLCD is transposed to equivalent viscous damping. Shaking table test is carried out for a TLCD specimen subjected to harmonic waves with various amplitudes. Transfer functions are ratios of liquid displacement of TLCD and control force produced by a TLCD, respectively, with respect to the acceleration excited by a shaking table. They are derived based on the equivalent TMD model of a TLCD. Then, the variation of design parameters according to the excitation amplitude is examined by comparing analytical transfer functions with experimental ones. Finally, the dissipation energy due to the damping of a TLCD, which is experimentally observed from the shaking table test, is examined according to the excitation amplitude. Comparisons between test results and analytical transfer functions showed that natural frequencies of TLCD and the ratio of the liquid mass in a horizontal column to the total liquid mass does not depend on the excitation amplitude, while the damping ratio of a TLCD increases with larger excitation amplitudes.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.81-88
• /
• 2006

본 논문에서는 새로운 선형 연산 트랜스컨덕턴스 증폭기(OTA)를 제안한다. OTA의 선형성 향상을 위해 이동도 보상 회로와 공통모드 전압 조절기법을 적용했다. 이동도 보상 회로는 각각 트라이오드와 서브스레쉬홀드 영역에서 동작하는 트랜지스터의 경로를 연결하여 이동도 감소를 보상한다. 공통모드 전압 조절기법은 공통모드 피드백(CMFB)과 공통모드 피드포워드(CMFF)로 구성된다. 제안된 기술은 넓은 입력전압 스윙 범위에서 향상된 Gm의 선형성을 나타낸다. 제안된 OTA는 ${\pm}1.1V$의 입력전압 스윙 범위 내에서 ${\pm}1%$의 Gm변화율을 갖고 총고조파 왜곡(THD)은 -73dB 이하이다. 제안된 OTA는 $0.35{\mu}m$ n-well CMOS 공정에서 공급전압이 3.3V를 갖도록 설계되었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.35-42
• /
• 2016

Developments in power electronics have enabled the widespread application of Pulse Width Modulation (PWM) inverters, notably for connecting renewable systems to the grid. This study demonstrates that a high-quality power can be achieved using a stand-alone inverter, whereby the comparison between the power quality of the stand-alone inverter with battery storage (off-grid) and the power quality of the utility network is presented. Multi-loop control techniques for a single phase stand-alone inverter are used. A capacitor current control is used to give active damping and enhance the transient and steady state inverter performance. A capacitor current control is cheaper than the inductor current control, where a small current sensing resistor is used. The output voltage control is used to improve the system performance and also control the output voltage. The inner control loop uses a proportional gain current controller and the outer loop is implemented using internal model control proportional-integral-derivative to ensure stability. The optimal controls are achieved by using the Sisotool tool in MATLAB/Simulink. The outcome of the control scheme of the numerical model of the stand-alone inverter has a smooth and good dynamic performance, but also a strong robustness to load variations. The numerical model of the stand-alone inverter and its power quality are presented, and the power quality is shown to meet the IEEE 519-2014. Furthermore, the power quality of the off-grid system is measured experimentally and compared with the grid power, showing power quality of off-grid system to be better than that of the utility network.

• Journal of Electrical Engineering and Technology
• /
• 제11권6호
• /
• pp.1714-1728
• /
• 2016

This paper presents improved harmonics extraction based on Adaptive Linear Neuron (ADALINE) algorithm for single phase photovoltaic (PV) shunt active power filter (SAPF). The proposed algorithm, named later as Improved ADALINE, contributes to better performance by removing cosine factor and sum of element that are considered as unnecessary features inside the existing algorithm, known as Modified Widrow-Hoff (W-H) ADALINE. A new updating technique, named as Fundamental Active Current, is introduced to replace the role of the weight factor inside the previous updating technique. For evaluation and comparison purposes, both proposed and existing algorithms have been developed. The PV SAPF with both algorithms was simulated in MATLAB-Simulink respectively, with and without operation or connection of PV. For hardware implementation, laboratory prototype has been developed and the proposed algorithm was programmed in TMS320F28335 DSP board. Steady state operation and three critical dynamic operations, which involve change of nonlinear loads, off-on operation between PV and SAPF, and change of irradiances, were carried out for performance evaluation. From the results and analysis, the Improved ADALINE algorithm shows the best performances with low total harmonic distortion, fast response time and high source power reduction. It performs well in both steady state and dynamic operations as compared to the Modified W-H ADALINE algorithm.

• 약학회지
• /
• 제36권6호
• /
• pp.518-528
• /
• 1992

To determine the optimal conformation of sulfonylureas, the correlation between conformation and hypoglycemic activity of the two sulfonylureas of tolbutamide and chlorpropamide as hypoglycemic agent was studied using an empirical potential function (ECEPP/2) and the hydration shell model in the unhydrated and hydrated states. The conformational energy was minimized from several starting conformations with possible torsion angles in each molecule. The conformational entropy change of each conformation was computed using a harmonic approximation. To understand the hydration effect on the conformation of the molecules in aqueous solution, the contribution of water-accessible volume of each group or atom in the lowest-free-energy conformation was calculated and compared each other. From comparison of the computed lowest-free-energy conformations of two sulfonylureas, it could be suggested that the hydration of sulfonylurea moiety is related to increase the hypoglycemic activity. From the calculation results, it was known that the conformational entropy is the major contribution to stabilize the low-free-energy conformations of two sulfonylureas in unhydrated state. Whereas, in hydrated state, the hydration free energy largely contributes to the total free energies of low-free-energy conformations of tolbutamide and conformational entropy contributes to stabilize the low-free-energy conformations of chlorpropamide. The torsion angles from phenyl ring to urea moiety of the low-free-energy conformations of the two sulfonylureas were shown the nearly regular trend. On the basis of these results, the conformation exhibiting the optimal hypoglycemic activity of sulfonylureas and the binding direction to pancreatic receptor site A could be predicted. Also, according to the side chain lengthening of urea moiety, tolbutamide showed various conformational change. Therefore, steric effect may be important factor in the interaction between sulfonylureas and the putative pancreatic receptor.

• 조명전기설비학회논문지
• /
• 제13권3호
• /
• pp.25-33
• /
• 1999

본 논문에서는 다이오드 정류기와 부스트 컨버터가 결합되 단상 PWM컨버터의 역률보상 및 고조파 저감 기법에 관하여 연구하였다. 일반적인 다이오드 정류기의 경우에서는 전원 입력측에 불연속 펄스 전류가 흘러서 역률의 저하 및 고조파 왜곡이 포함되어 다른 전원계통에 악영향을 주는 문제점이 있다. 이를 해결하기 위하여 본 논문에서는 3차 고조파가 주입된 PWM 기법을 사용하여 입력전류에서의 고조파왜곡이 감소되는 AC-DC 부스트 컨버트를 제안하였다. 이때의 부스트 컨버터는 스위칭 손실 및 회로구성이 용이한 불연속적전류모드 제어방식을 채용하였다. 스위칭 주파수가 5[kHz]인 컨버터를 구성하여 컴퓨터 시뮬레이션 및 실험을 행하였으며 그 결과 역률 보상 및 전 고조파 왜곡이 감소되었음을 확인하였다.