• 한국전자파학회논문지
• /
• 제21권2호
• /
• pp.188-193
• /
• 2010

본 논문은 관통형 비아와 전송 선로 사이의 임피던스 불연속과 P/G(Power/Ground) 면 사이에서 발생되는 공진으로 인한 클록 신호 응답 성능 저하가 관통형 비아(through-hole via)가 있는 4층 PCB(Printed Circuit Boards)의 SI(Signal Integrity) 성능에 악영향을 미치는 것을 이론적으로 분석하였다. 비아 구조의 집중소자 모델링을 이용한 반사 전압 계산과 TDR(Time Domain Reflector) 시뮬레이션 결과 비교로 관통형 비아와 전송 선로 사이의 임피던스 불연속 최소화 시킬 수 있고, 관통형 비아 위치를 이용한 P/G면 공진 상쇄의 시뮬레이션 결과로 클록 신호 응답 성능을 향상시킬 수 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제35권1호
• /
• pp.29-41
• /
• 2020

Cross-beams of modern through truss bridges are connected to truss chord at its nodes and between them. It results in variable rotational end restraint for cross-beams, thus variable bending moment distribution. This feature is captured in three-dimensional modelling of through truss bridge structure. However, for preliminary design or rapid assessment of service load effects such technique of analysis may not be available. So an analytical method of assessment of rotational end restraint for cross-beam of through truss bridges was worked out. Two cases - nodal cross-beam and inter-nodal cross-beam - were analyzed. Flexural and torsional stiffness of truss members, flexural stiffness of deck members and axial stiffness of wind bracing members in the vicinity of the analyzed cross-beam were taken into account. The provision for reduced stiffness of the X-type wind bracing was made. Finally, general formula for assessment of rotational end restraint was given. Rotational end restraints for cross-beams of three railway through truss bridges were assessed basing on the analytical method and the finite element method (three-dimensional beam-element modelling). Results of both methods show good agreement. The analytical method is able to reflect effects of some structural irregularities. On the basis of the obtained results the general values of rotational end restraint for nodal and inter-nodal cross-beams of railway through truss bridges were suggested.

• 전기학회논문지
• /
• 제59권4호
• /
• pp.700-706
• /
• 2010

Carbon costs, either in the form of a carbon tax or through permit prices in an emissions trading scheme, would ultimately be reflected in higher electricity prices. This price "pass-through" is very critical to the effective design of new policies to curb the amount of carbon emissions. This paper sets out in a structured way the factors that determine price pass-through and how carbon costs would impact on the electricity market and the existing coal-fired power plants. It is shown that pass-through can vary drastically if the underlying dispatch potential of generators varies significantly across alternative emissions reduction scenarios. It can also vary depending on the availability of competing cleaner forms of generation. Pass-through as a measure of business performance is therefore hard to generalize across different circumstances and should be interpreted carefully.

• 무역상무연구
• /
• 제78권
• /
• pp.53-72
• /
• 2018

Recently, it has been known that it need to be solved export marketing on expanding export of Small Business Commodity. Therefore, the purpose of this paper is to analyse on expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0. This study deals with the terms of three connection success factors on expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0 which are a firm's subjective factors, a industrial environment factors, and a governmental policy factors. According to analysis results of the three success factors, a firm's subjective factors(4.13 score) are scored at the most ones of the three success factors, to be compared with a industrial environment factors(3.89 score), with a government policy factors(3.72 score). Therefore, first of all, it is important to expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0 through as follows, a firm's subjective factors : (1) to procure concentrated market strategy and real market capacity, (2) to procure speedy satisfaction of customer needs and confidence, (3) to procure ability of export marketing through e-Trading Application, (4) to enhance export expanding strategy coincided in Industrie 4.0. And, the next, we have to expanding export of Small Business Commodity through e-Trading Application in Industrie 4.0 through considering a industrial environment factors and a government policy factors.

• International Journal of Advanced Culture Technology
• /
• 제8권3호
• /
• pp.247-253
• /
• 2020

It has emerged Food-content among various forms of 1-person media through social media. Food-content influencer also market products through 1-person media, generating revenue through increased views and subscribers of 1-person media. It also sells products through sponsorship. In general, there is a profit structure through 1-person media viewing, but research on how restaurant companies generate profits directly through food-content is insufficient. In addition, research on converting subscribers to consumers through food-contents is minimal. In this paper, we propose an experiential application system based on the behavior of food-content creators. The proposed system collects and categorizes food-content information, and maps between highly related words to organize into keyword categories. The ontology tag-based concept network applied to the proposed system connects representative information by pre-extracting/mapping information related to information requests among a wide range of data. This method maps relevant food-content information to provide the user with data collected/storage in the form of an application. The user uses the application while watching the food eaten by the influencer and creator. And, it is meaningful that the user could be provided is provided with information about the food they want to eat.

• 패션비즈니스
• /
• 제25권6호
• /
• pp.119-130
• /
• 2021

This study investigated the effects of the chatbot's level of anthropomorphism - closeness to the human form - and its self-disclosure - delivery of emotional exchange with the chatbot through its facial expressions and chatting message on the user's intention to accept the service. A 2 (anthropomorphism: High vs. Low) × 2 (self-disclosure through facial expressions: High vs. Low) × 2 (self-disclosure through conversation: High vs. Low) between-subject factorial design was employed for this study. An online survey was conducted and a total of 234 questionnaires were used in the analysis. The results showed that consumers used chatbot service more when emotions were disclosed through facial expressions, than when it disclosed fewer facial expressions. There was statistically significant interaction effect, indicating the relationship between chatbot's self-disclosure through facial expression and the consumers' intention to use chatbot service differs depending on the extent of anthropomorphism. In the case of "robot chatbots" with low anthropomorphism levels, there was no difference in intention to use chatbot service depending on the level of self-disclosure through facial expression. When the "human-like chatbot" with high anthropomorphism levels discloses itself more through facial expressions, consumer's intention to use the chatbot service increased much more than when the human-like chatbot disclosed fewer facial expressions. The findings suggest that chatbots' self-disclosure plays an important role in the formation of consumer perception.

• 대한수학교육학회지:수학교육학연구
• /
• 제12권4호
• /
• pp.557-579
• /
• 2002

The purpose of this study is to find out the problems which are caused when the limit concept of sequences is learned through an intuitive definition and to suggest a way of solving those problems. Students in Korea study the limit concept of sequences through an intuitive definition. They fail to apply the intuitive definition properly to the problems and they are apt to have misconception even though the Intuitive definition is applied properly. To solve these problems, this study examined the develop- mental process of the limit concept of sequences from the Intuitive definition to the formal definition, and looked into the way of students' internalization of the process through a field study. In this study, the levels of the limit concept of sequences possessed by the students at ZPD are as follows; level 0 : Students understand the limit concept of sequences through the intuitive definition. level 1 : Students understand the limit concept of sequences as 'The difference between $\alpha$$_{n}$ and $\alpha$ approaches 0' rather than 'The sequence approaches $\alpha$ infinitely.' level 2 : Students understand the limit concept of sequences through the formal definition. The levels of students' limit concept development were analysed by those criteria. Almost of the students who studied the limit concept of sequences through the intuitive defition stayed at level 0, whereas almost of the students who studied through the formal definition stayed at level 1. Through the study, I found that it was difficult for the students to develop the higher level of understanding for themselves but the teachers and peers could help the students to progress to the higher level. Students' learning ability was one of major factors that make the students progress to the higher level of understanding as the concept was developed hierarchically from Level 0 to Level 2. If you want to see your students get to the higher level of understanding in the limit concept, you need to facilitate them to fully develop understanding in lower levels through enough experiences so that they can be promoted to the highest level.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.900-904
• /
• 1991

It is important and difficult to control the steam temperature in the once through boiler. Generally, steam temperature of once through boiler not only is controlled by boiler spray water flow, but also is influenced by feed water flow and fuel flow. So we have to make the same gain of fuel flow controller and feed water flow controller. This paper is shown the design and test of steam temperature and feed water flow control system for once through boiler in pusan thermal power plant.

• 한국생산제조학회지
• /
• 제21권4호
• /
• pp.563-569
• /
• 2012

In the semiconductor and display device production processes, the handling of sensitive objects needs new carrying technology. Floating carrying motion is a practical alternative solution for non-contact handling of parts and substrates. This paper presents a study of through paths inside the air pressure pick-up head to generate the floating motion. The air motion by conceptual designed paths inside the head gradually develops positive pressure and vacuum between narrow objects. Positive pressure occurs through the head tip before discharging outside of the head. Negative pressure is developed by evacuating the inside head bottom as result of the radial flow connecting the vertical through-holes. The numerical analysis was done to figure out the stable levitation caused by the two acting forces between surfaces. In comparing with the standard case that the levitation gap gets 0.7-0.9 mm, it confirms the suggested head characteristics to show floating capacity in accordance with the head size, number of through-hole, and locations of through-hole in succession of conceptual design for a prototype.

• 전력전자학회논문지
• /
• 제12권4호
• /
• pp.332-338
• /
• 2007

본 논문은 ZSI에서 shoot-through 시간을 효율적으로 제어하기 위한 변형 공간전압 변조방식으로 3종류를 제시하였다. 3개의 변형 공간전압 변조방식에 대한 스위칭 패턴과 shoot-through 시간변화에 대한 변조신호의 변화를 분석한다. Shoot-through 시간 제어 범위와 함께 스위칭 패턴 및 변조신호의 평형성 등을 고려하여 최적의 변형 공간전압 변조방식을 선정하였으며, 32비트 DSP를 사용한 실험을 통하여 그 타당성을 확인한다.