DOI QR코드

DOI QR Code

Study on Through Paths Inside the Air Pressure Pick-Up Head for Non-Contact Gripper

비접촉식 그리퍼 적용을 위한 공기압 파지식 헤드 내부 관통로 고찰

  • 김준현 (서울과학기술대학교 기계자동차공학과)
  • Received : 2012.01.16
  • Accepted : 2012.04.30
  • Published : 2012.08.15

Abstract

In the semiconductor and display device production processes, the handling of sensitive objects needs new carrying technology. Floating carrying motion is a practical alternative solution for non-contact handling of parts and substrates. This paper presents a study of through paths inside the air pressure pick-up head to generate the floating motion. The air motion by conceptual designed paths inside the head gradually develops positive pressure and vacuum between narrow objects. Positive pressure occurs through the head tip before discharging outside of the head. Negative pressure is developed by evacuating the inside head bottom as result of the radial flow connecting the vertical through-holes. The numerical analysis was done to figure out the stable levitation caused by the two acting forces between surfaces. In comparing with the standard case that the levitation gap gets 0.7-0.9 mm, it confirms the suggested head characteristics to show floating capacity in accordance with the head size, number of through-hole, and locations of through-hole in succession of conceptual design for a prototype.

Keywords

References

  1. Fearing, R. S., 1995, "Survey of Stacking Effects for Micro Parts Handling," In: Proceedings of the IEEE/ RSJ Conference on Intelligent Robots and Systems, Vol. 2, pp. 212-217.
  2. Guldi, R. L., Whitfield, M. T., and Foag, F. D., 1999, "Strategy and Metrics for Wafer Handling Automation in Legacy Semiconductor Fab.," IEEE Transactions on Semiconductor, Vol. 12, No. 1, pp. 102-108. https://doi.org/10.1109/66.744531
  3. Vandaele, V., Lambert, P., and Delchambre, A., 2005, "Non-contact Handling in Microassembly: Acoustical Levitation," Precision Engineering, Vol. 29, No. 4, pp. 491-505. https://doi.org/10.1016/j.precisioneng.2005.03.003
  4. Davies, S., Gray, J. O., and Caldwell D. G., 2008, "An End Effector based on the Bernoulli Principle for Handling Sliced Fruit and Vegetables," Robotics and Computer-Integrated Manufacturing, Vol. 24, No. 2, pp. 249-257. https://doi.org/10.1016/j.rcim.2006.11.002
  5. Vandaele, V., Lambert, P., and Delchambre, A., 2005, "Non-contact Handling in Microassembly: Acoustical Levitation," Precision Engineering, Vol. 29, No. 4, pp. 491-505. https://doi.org/10.1016/j.precisioneng.2005.03.003
  6. Waltham, C., Bendall, S., and Kotlicki, A., 2003, "Bernoulli Levitation," American J. Physics, Vol. 71, No. 2, pp. 176-179. https://doi.org/10.1119/1.1524162
  7. Li, X., Kawashima, K., and Kagawa, Y., 2008, "Analysis of Vortex Levitation," Experimental Thermal and Fluid Science, Vol. 32, No. 8, pp. 1448-1454. https://doi.org/10.1016/j.expthermflusci.2008.03.010
  8. Dini, G, Fantoni, G., and Failli, F., 2009, "Grasping Leather Plies by Bernoulli Grippers," Cirp Annals, Vol. 58, No. 1, pp. 21-24. https://doi.org/10.1016/j.cirp.2009.03.076
  9. Chen, X. -D., and He, X. -M., 2006, "The Effect of the Recess Shape on Performance Analysis of the Gas-lubricated Bearing in Optical Lithography," Tribology International, Vol. 39, No. 11, pp. 1336-1341. https://doi.org/10.1016/j.triboint.2005.10.005
  10. Air Bearing, 2003, Air Bearing Application and Design Guide, New Way Precision, rev D, pp. 4-12.
  11. Kim, J. H., "Design of the Air Pressure Pick-up Head for Non-Contact Wafer Gripper," Journal of Manufacturing Engineering and Technology, Vol. 21, No. 3, pp. 401-407.
  12. O'Hanlon, J. F., 2003, A User's Guide to Vacuum Technology, Wiley, New Jersey.
  13. Kim, H. -H., Hwang, Y. W., Park, D. H., and Lim, K. -J., 2000, Introduction to BASIC VACUUM Engineering for Semiconductor and Display Processing, NaeHa Press, pp. 52-56.

Cited by

  1. 박판 웨이퍼의 적재 시 손상 최소화 기술 vol.22, pp.1, 2012, https://doi.org/10.5762/kais.2021.22.1.321