• 동력기계공학회지
• /
• 제10권3호
• /
• pp.58-66
• /
• 2006

The effect of bath composition, plating condition and plating rate on the magnetic properties of electroless Ni-Cu-P deposits were investigated. With increasing $CuSO_4$ concentration in the bath, plating rate increased, while the Br value of deposits decreased Sharply. Plating rate increased up to 34% with the addition of 200ppm of NaF and 0.8ppm of Thiourea to the bath. Plating reaction had been ceased by the increase of pH above 11.3, bath temperature higher than $90^{\circ}C$ and under $70^{\circ}C$. The Br value of deposit was uniform with various concentration of complexing agent (Sodium citrate, Ethylenediamine) in the bath. The Br value of deposit was almost equal to that found by the addition of stabilizer(Thiourea) and accelerator(NaF). The Br value of deposit was uniform in plating time(120 min) and heat treatment temperature(below $200^{\circ}C$), and were confirmed to have adequate bath stability for practical use.

• 대한화학회지
• /
• 제51권6호
• /
• pp.520-525
• /
• 2007

Thiourea/urea, 다양한 aromatic aldehydes, ammonium acetate의 세가지 요소를 가지고 마이크로파의 조 사하에서 무수조건의 활성화된 비산화재를 촉매로 사용하여 높은 수율의 6-aryl-1,2,4,5-tetrazinan-3-thiones/ones를 얻었 다. 6-aryl-1,2,4,5-tetrazinan-3-thiones/ones의 구조는 녹는점, MS, IR, 1H NMR, D2O 교환, 13C NMR, 이차원의 NMR 스펙트럼(HOMOCOR, HSQC)을 바탕으로 증명되었다.

• Corrosion Science and Technology
• /
• 제10권4호
• /
• pp.143-150
• /
• 2011

Copper electroplating has been applied to various fields such as decorative plating and through-hole plating. Technical realization of high strength copper preplating for wear-resistant tools and molds in addition to these applications is the aim of this work. Brighters and levelers, such as MPSA, Gelatin, Thiourea, PEG and JGB, were added in copper sulfate electrolyte, and the effects of these organic additives on the hardness were evaluated. All additives in this work were effective in increasing the hardness of copper electrodeposits. Thiourea increased the hardness up to 350 VHN, and was the most effective accelarator in sulfate electrolyte. It was shown from the X-ray diffraction analysis that preferred orientation changed from (200) to (111) with increasing concentration of organic additives. Crystallite size decreased with increasing concentration of additive. Hardness was increased with decreasing crystallite size, and this result is consistent with Hall-Petch relationship, and it was apparent that the hardening of copper electrodeposits results from the grain refining effect.

• 농약과학회지
• /
• 제7권2호
• /
• pp.155-158
• /
• 2003

2-Imino-1,3-thiazloine 1은 새로운 작용기작에 의하여 벼도열병원균에 대하여 선택적인 항균력을 나타낸다. 화합물 1의 C-2 위치의 imino기에 cyano 기가 치환된 새로운 화합물 2-cyanoimino-1,3-thiazoline 유도체 2를 합성하였다. Cyano 기의 강한 전자끌기와 더불어 1,3-thiazoline 고리의 황 및 질소원자의 비공유전자쌍은 2-imino-1,3-thiazloine 계열의 생물활성에 영향을 줄 것으로 예상되었다. Thiourea 4 의 $\gamma$-chloro-$\beta$-ketoacetoacetanilide 3에 대한 위치 특이적인 친핵적 공격 및 산촉매 하의 탈수에 의해서 2가 생성되었다.

• Bulletin of the Korean Chemical Society
• /
• 제32권10호
• /
• pp.3561-3565
• /
• 2011

A rapid and inexpensive method was developed for the determination of trace silver in geological samples by using sulfhydryl cotton coupled with ICP-MS. The interferences such as $^{90}Zr$, $^{92}Mo$ and $^{93}Nb$ on silver were investigated in detail. Sulfhydryl cotton was found to be an effective adsorbent for separation of interferences for Ag in the solutions. Excellent agreements with the certified values were obtained for all the certified reference materials. The memory effects of Ag by ICP-MS were examined by using different agents, including water, nitric acid, and HCl-thiourea to all standards/samples. The agents also acted as cleansing solutions. A combination of HCl with thiourea gave the minimum memory effect. For comparison of results, a proposed Chinese Geology Survey procedure DC-ARC-AES and a direct determination pretreatment method of ICP-MS (water bath- auqa regia digestion) were studied. Under optimal conditions, the detection limits of our method for $^{107}Ag$ and $^{109}Ag$ were 1.2 ng/g and 1.3 ng/g, which offered much better accuracy for some difficult analysis geological samples such as GBW07604, GBW07605.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1513-1520
• /
• 2013

Novel chitosan (CS) based membrane networks were developed by solution casting and followed by crosslinking with different crosslinkers such as glutaraldehyde, urea-formaldehyde, and thiourea-formaldehyde. The developed membrane networks were designated as CS-GA, CS-UF and CS-TF. Crosslinking reaction of CS membranes was confirmed by Fourier transform infrared spectroscopy. Membrane rigidity and compactness were studied by the differential scanning calorimetry. The surface morphology of CS membranes was characterized by scanning electron microscopy. The sorption behaviour with respect to contact time, initial pH and initial metal ion concentration were investigated. The maximum adsorption capacity of CS-GA, CS-UF and CS-TF sorbents was found to be 1.03, 1.2 and 1.18 mM/g for $Cu^{2+}$ and 1.48, 1.55 and 2.18 mM/g for $Ni^{2+}$ respectively. Swelling experiments have been performed on the membrane networks at $30^{\circ}C$. Desorption studies were performed in acid media and EDTA and it was found that the membranes are reusable for the metal ion removal for three cycles. The developed membranes could be successfully used for the separation of $Cu^{2+}$ and $Ni^{2+}$ metal ions from aqueous solutions.

• 자원리싸이클링
• /
• 제26권1호
• /
• pp.3-10
• /
• 2017

은은 특수한 물성을 지니고 있으며 첨단소재용 원료로 사용된다. 따라서 첨단소재를 제조하는데 필요한 고순도 은을 다양한 자원으로부터 회수하는 공정을 개발하는 것은 매우 중요하다. 본 논문에서는 여러 자원으로부터 은의 침출을 위해 개발된 공정을 조사하였다. 무기산(질산과 황산)과 무기산 및 산화제(오존, 산소, 과산화수소, 3가 철이온)의 혼합용액에 의한 은의 침출공정의 장단점을 비교하였다. 또한 thiourea와 thiosulfate에 의한 은의 침출과 무기산에 의한 침출에 대해 환경에 미치는 영향을 중심으로 비교하였다.

• 자원리싸이클링
• /
• 제26권5호
• /
• pp.3-11
• /
• 2017

금과 은은 귀금속으로 첨단소재를 제조하는데 사용된다. 용매추출은 다양한 침출용액으로 부터 순수한 금과 은을 회수할 수 있는 중요한 공정이다. 본 논문에서는 cyanide, thiocyanate, thiosulfate, thiourea과 염산용액에서 금(I, III)과 은(I)의 용액화학 및 용매추출에 의한 분리를 고찰했다. 여러 단독 및 혼합추출제에 의한 금(I, III)과 은(I)의 용매추출 및 분리거동을 각 침출용액에서 추출반응과 추출제의 선택도를 토대로 비교했다. 염산용액이 용매추출에 의한 금과 은의 분리의 효율측면에서 적당하다.

• 센서학회지
• /
• 제30권6호
• /
• pp.357-363
• /
• 2021

We developed a chemiresistive anion sensor using highly conductive carbon nanotube fibers (CNTFs) functionalized with anion receptors. Mechanically robust CNTFs were prepared via wet-spinning utilizing the nematic liquid crystal properties of CNTs in chlorosulfonic acid (CSA). For anion detection, polymeric receptors composed of dual-hydrogen bond donors, including thiourea 1, squaramide 2, and croconamide 3, were prepared and bonded non-covalently on the surface of the CNTFs. The binding affinities of the anion receptors were studied using UV-vis titrations. The results revealed that squaramide 2 exhibited the highest binding affinity toward AcO^-, followed by thiourea 1 and croconamide 3. This trend was consistent with the chemiresistive sensing responses toward AcO^- using functional CNTFs. Selective anion sensing properties were observed that CNTFs functionalized with squaramide 2 exhibited a response of 1.08% toward 33.33 mM AcO^-, while negligible responses (<0.1%) were observed for other anions such as Cl^-, Br^-, and NO₃^-. The improved response was attributed to the internal charge transfer of dual-hydrogen bond donors owing to the deprotonation of the receptor upon the addition of AcO^-.

• Korean Chemical Engineering Research
• /
• 제49권3호
• /
• pp.330-337
• /
• 2011

본 연구에서는 자기조립단분자막(SAM)의 연구에 유용한 일련의 $\omega$-mercapto alkyl amine 1 및 $\omega$-mercapto alkanoic acid 2를 만드는 제조공정을 서술하였다. 먼저 첫 번째 목표물질인 $\omega$-mercapto alkyl amine 1의 제조방법은 다음과 같다: 먼저 시중에서 시판되는 potassium phthalimide와 $\omega$-bromo alcohol을 $80{^{\circ}C}$, DMF 용매에서 치환반응으로 화합물 3을 합성하였다. 아민기와 알코올기를 포함하는 화합물 4을 합성하기 위하여 먼저 화합물 3를 hydrazine hydrate로 환류시킨 후, 이어서 c-HCl로 처리하여 부반응물 5를 수반하여 생성물 4를 76-98% 수율로 만들었다. $\omega$-aminoakanol 4의 hydroxyl기를 HBr로 브로민화반응을 하여 $\omega$-bromoamine 화합물 6을 34-97% 수율로 만들었다. 티올기를 도입하기 위하여 화합물 6을 95% 에탄올 속에서 thiourea와 치환 반응하여 $\omega$-aminoalkanthiuronium 7을 만든 다음, 이 화합물을 센 염기(KOH)와 센 산으로 처리하여 목표화합물, $\omega$-mercapto alkylamines 1을 총 5단계를 걸쳐서 제조하였다. 덧붙여 두 번째 목표물질인 $\omega$-mercapto alkanoic acid 2는 다음과 같이 2단계를 통하여 제조하였다: $\omega$-bromo alkanoic acid를 95% 에탄올 속에서 thiourea로 처리하여 화합물 7을 만든 다음, 센 염기(KOH)를 처리하여 thiuronium bromide 를 제거한 후, 다시 센 산(HCl) 수용액으로 처리하여 두 번째 목표화합물 $\omega$-mercapto alkanoic acid 2을 얻었다. 제조한 긴 사슬 알킬티올 1과 2 유도체들은 금속(Au, Pt, Ti)에 자기조립단분자 막을 형성함으로써 단백질, 효소 및 다양한 생체분자를 고정하는 연결자로 사용될 수 있으며, 그 밖에 금속의 표면개질을 이용하여 다양한 응용 연구를 위한 화학 도구로 사용될 수 있다.